Project: Hobby Desk
-
Cute knife,, I kinda like the wishful thinking, working up a rose compass? I was looking into making one into a tattoo for myself..
JR -
Yeah, there's a few detailing ideas that I've been mapping out. The compass one is the most likely to fail miserably
I don't think I'll be able to work the materials precise enough to make it work. I'll give it a go though. If nothing else, it will be a valuable learning curve. 
Thankfully, I have some other ideas which will be a little more sensible for a vision impaired, wonky brain stemmed, klutz like me :D
The RSK Mk5 sure is a cute little knife, but I'm not a fan of the "two point contact" handling, and hopefully a pair of scales should improve it considerably. Other than fitting the scales, I want to square off the spine to a sharp corner, and make a dual sheath which holds that and a fire steel.
The Swiss knife mods will (if they work) be a lot more complex, so this will be a nice starter project to get the feel for some of the repeating processes, without knackering anything important up.
-
Interesting, I look forward to progress!

I myself have a few things if I ever get to them, one is a new hat, the one I currently wear has a lot of pins in to show my support but I’ve gotten tired of getting poked, so I want to get patches rather the pins and stitch them in, thus no more getting poked! But that’s not the best part, the hat I got has built in led lights and switch in the brim, a 48 lumen no hands flashlight! :)
JR -
You get that lathe up and running I got a very easy project for you just using a 3” piece of stock..
JR -
@MadPlumbarian said:
You get that lathe up and running I got a very easy project for you just using a 3” piece of stock..
JRKeep talking...

-
You get that lathe up and running I got a very easy project for you just using a 3” piece of stock..
JRKeep talking...

Well , you just need that 3” piece of stock, maybe 1/2-3/4” thick, if aluminum you could probably turn it in 5min..
JR -
You get that lathe up and running I got a very easy project for you just using a 3” piece of stock..
JRKeep talking...

Well , you just need that 3” piece of stock, maybe 1/2-3/4” thick, if aluminum you could probably turn it in 5min..
JR
You're not making this easy, JR :DTurn what from that piece?
-
You get that lathe up and running I got a very easy project for you just using a 3” piece of stock..
JRKeep talking...

Well , you just need that 3” piece of stock, maybe 1/2-3/4” thick, if aluminum you could probably turn it in 5min..
JR
You're not making this easy, JR :DTurn what from that piece?
Oh come on, I can’t just spill the beans, besides you don’t have your lathe set up.. I tell you what, I’m working on something very similar yet using a carriage bolt. I just don’t have a lathe so I’m doing it in reverse, the stock isn’t turning the Dremels doing the turning.. so it’s going to take a while, and if it turns out good I’ll post it. I’d post what I’m working on but I can’t send photos in a pm..
JR -
Here’s what I’m starting on with a very small hint..
JR
-
No worries :D
Hopefully I should have the lamp back up and running next week, so maybe by next weekend, I might be able to finally get a play with it.
It looks like I need to grind my own lathe tools, but there is some stock included, and I've got a few simple milling tools for it now too - a few dinky little endmills in HSS, and a carbide slot drill. I'll probably fudge anything else I need to do with dremel tools for now. I only need to do some simple rebating and thicknessing to start with anyway.
-
@MadPlumbarian said:
Here’s what I’m starting on with a very small hint..
JRI'll look forward to updates

-
Dang that took 2-1/2hrs, of course if I had a bench grinder it would have cut the time in a 1/4, and yet with a lathe probably down to 10min, but here it is, a duct tape keychain, not big and not heavy. I did something a while back using a cotter pin which worked great, only problem was it started to fall because there was nothing to support it.
Anyway, here you can see the carriage bolts head will support the tape as it hangs, but on mine the two nuts that I jammed together to create the end isn’t as wide as the head so you can see the edge of the tape, and over time might get a little ripped up, unlike that other one I posted, that’s kinda what I was aiming for,
JR

-
Nice work!

-
@AimlessWanderer said:
Nice work!
Thanks, not bad, it will do it’s job, but definitely not the best!
It will hold 18-24” of duct tape depending on what brand, that’s gorilla tape and since it’s so thick only 18”, but if it was regular stuff then easily another 6”.. but as you can see in that one pic the two other ones are two diff sizes, and I can say it’s come in handy!
JR -
I tried doing some commentary for that Gerber mod video.
I can't do it

I've stood on stage in front of a couple or three hundred faces, no problem. In fact I found it more nerve wracking, the fewer people were in front of me. Talking . into a microphone with nobody else there ... :ahhh too weird!
I think I need to overcome this somehow, as commentary will make it MUCH easier for the audience to follow along on some of the future videos.
-
@AimlessWanderer said:
I tried doing some commentary for that Gerber mod video.I can't do it

I've stood on stage in front of a couple or three hundred faces, no problem. In fact I found it more nerve wracking, the fewer people were in front of me. Talking . into a microphone with nobody else there ... :ahhh too weird!
I think I need to overcome this somehow, as commentary will make it MUCH easier for the audience to follow along on some of the future videos.
Don’t feel so bad, I can’t do it myself, I can’t do crowds, heck even if we have company my big thing is reading, I was never good in reading especially being dyslexic and if we’re playing one of these games that you got to read a card out loud and I don’t know the word and I have to try to pronounce I’ll freeze, tense up, the face turns red, that’s normally when someone says “you mean _____”? Yeah yeah that’s it. I’m horrible!
JR -
Al, remember, everyone thinks they sound weird through a microphone.
I thought I sounded like a squeaky annoying guy. :D And most of them are wrong.
Why not upload a little demo clip?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


