Difference in quality between Leatherman MOLLE sheaths
-
@chrono said:
Qick and easy, just watch out for ones with the plasticky rim. Those have paper-thin fabric with plastic coating on the inside. They will get ripped in no time. When I sold a few LM tools, I got rid of most of them in my collection as well. Not just fabric, recent LM leather sheaths are inferior as well. They use some sort of bonded/ coated leather or something. which is separated in "layers" if you happen to buy old ones, even NIB. LM should learn from SOG, and offer sheaths in full grain leather.SOG's leather sheaths are a step above!

-
I was just about to update the other Leatherman sheath thread with pictures of these same sheaths!

USA left, China right.





USA

China
The quality on the Chinese made ones are pretty awful, especially in comparison with the USA made ones. They are just as bad as the cheap sheaths you get with the crappy China made tools at Wal Mart.
Def
-
No doubt about it, I bought a China molle sheath. Tsk, tsk, tsk.
-
LM is sourcing stuff to China now? It looks like a counterfeit lol
-
This thread I'd several years old and I have had that sheath for a few years, so yeah. They've been sourcing them from China for a whole.
Def
-
The lesser quality ones wear out pretty quickly as well
mine has a couple holes in the bottom that I have slowed down with a piece of fabric (one was the grommet that fell out and the other has just come about on its own :( )
I one of the better quality ones now (thanks again Ben
) I will begin using it and see how it fairs after this one has fallen apart ::) probably won't be long gentlemen :D -
As of today, how hard/easy is it to find the sheath with large grommet and lettering ?... Was it available in tan or just black ?...
-
@lovecraft25 said:
As of today, how hard/easy is it to find the sheath with large grommet and lettering ?... Was it available in tan or just black ?...My guess is that it's going to be hard to get your hands on the U.S. made molle sheaths (I only found one, and that one came with my BO ST300 years ago, since then, all the Molle sheaths I got were the "made in China" ones ...
And I've never seen these ones in tan, but maybe someone else has.
The safest way to get a U.S. made Leatherman Mole is to buy the bigger sheath, the Molle XL (for Surge, MUT, ST300, ...). These come in black and tan and are very well made (at least the ones I got, don't know if they changed these to cheaper versions as well since I bought my last one).
Either way, might be worth checking out.
-
Is that an assumed fact or a verified fact, that the molle sheath with the big grommet and the Leatherman lettering is "made in USA" ?... Like a sticker saying so ?... After all, we have have "made in China" and "made in Mexico" stickers in other sheaths.
I thought the only "USA Molle sheath" was the XL one with the american flag label sewed (Berry compliant) :

...then I also saw this one (seems to be the regular "large" one, but also Berry compliant) : https://m.youtube.com/watch?v=kVFbz6a9mEU
Any thought ?...
-
I'm not sure about the good sheaths being U.S. made. I didn't re-read the entire topic and just went from Grants' statement in post nr. 12.
I'll Check my collection tomorrow, since I always take the black “made in ..." stickers out of the sheaths and stick them on the inside of the original tool box. So if there was such a sticker in one or both of those sheaths, I would still have it.
I'll check tomorrow.
-
Mhhh according to this video, the large grommet and lettering sheath is "made in China" :
-
When buying the molle sheaths, buy the one for the MUT (with wrench slot in back and thicker material) and not the st300/OHT sheath. The MUT sheath seems like it is made to mil-spec, while the 300/OHT versions seem like something made in a toy factory with little regard to longevity.
-
@gerleatherberman said:
When buying the molle sheaths, buy the one for the MUT (with wrench slot in back and thicker material) and not the st300/OHT sheath. The MUT sheath seems like it is made to mil-spec, while the 300/OHT versions seem like something made in a toy factory with little regard to longevity.This is true for the current Molle sheaths that come with these tools, but the one I got (years ago) with my BO ST300 is build with the same (or very close to) quality as the MUT sheath. I own two of those XL sheaths, the tan one that came with my MUT and a black one I bought for my BO Surge (after I was so impressed by the MUT sheath).
Maybe they are all made in China, but in different factories.
Anyway, it's not the first time that two sheaths that should be the same are actually very different. I remember the Leatherman Premium Sheaths (the ones half leather, half nylon) I got with a Wave and a ST300. The one from the Wave was brilliant, very sturdy, lots of heavy duty nylon on the sides, even the small pouches on the side for led light or bit driver were made out of this nylon, and it was a nice tight fit for the Wave. While the one that came with my ST300 was just utter cr*p, all thin stretchy nylon on the sides, small pouches made of the same stretchy nylon, and the ST300 could just pop out of the closed sheath because of the stretchy sides ...
-

For a while, last year, there was a seller on ebay that had the older style (quality) premium Wave(also fit the kick, fuse, blast, rev, wingman, and sidekick) and premium Surge/OHT/ST300 sheaths selling three for $20. I bought 9(one pocket and leather wrap around on the other side) mediums(for my kick, fuse, blast, rebar, wave, rev, wingman and sidekick - then gave one to a friend) and six large(double pocket) sheaths(ss surge, bo/ss surge, core, st300, OHT, and a spare) and was glad to see they were the older style with better construction. I ordered another batch earlier this year and found the newer "3 for $20" to be a disappointment. Wish I had bought more when I got the first ones. :ahhh
I hate the basic nylon (two pocket) that they ship with most tools and try to spend a few extra bucks to get the box leather sheaths when possible. They aren't as good as the OG leather box sheaths, but they are much better than the flimsy(swinging off the belt) two-pocket nylon and nylon pancake sheaths. :)/end rant.
-
Euh ...

There are pics off all types of Molle sheaths in this topic already if I'm not mistaken ...

;)
-
Sorry for the misunderstanding, I was refering to the sheaths gerleatherberman bought ;-)
-
No problem, lovecraft.

Here are some pics of the ones that don't have a tool stuck in right now.
LM still has these styles, but they are very thin at the weight bearing points.



-
Thank you gerleatherberman. I have the "Premium Sheath" for the Surge. It's made in China, average quality. Are today the only "made in USA" sheaths then "Heritage" ones ?...
-
Indeed. Aside from the leather heritage(which isn't good quality anyway) sheaths, all of their sheaths are from China. It just adds too much money to the tool price to have all the sheaths made in the U.S.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
