The Great Barlow thread!
-
:)
-
Trains and Barlows.

-
Kabar today


-
This was in a big bag of junk I purchased at an estate sale. Imperial Barlow. USA made in Providence R.I. According to the blade tang. The plastic handle is imprinted with Sperry New Holland. It needs a good cleaning and sharpening.
-
Nice Yadda, good steel on Imperials

-
'
Dean, I have one of these Camcos. Is yours unfinished on the bottom like mine? What I mean is, mine is ground/sanded down on the top (blade) side, but was not sanded down on the backspring side so that the scales and liners are flush.I've heard rumors that Camillus produced the Case barlows at one time, and I can certainly say that these Camco frames are spitting images of the Case barlows from the 70's, but the blade stock is a bit different.
-
Ulster Barlow. Got this yesterday. Won it cheap. It was very dirty and needed some serious tlc. It still needs some attention but is much better and quite usable now.
-
@Yadda said:
This was in a big bag of junk I purchased at an estate sale. Imperial Barlow. USA made in Providence R.I. According to the blade tang. The plastic handle is imprinted with Sperry New Holland. It needs a good cleaning and sharpening.That one will clean up nicely, good find.

@David said:
Ulster Barlow. Got this yesterday. Won it cheap. It was very dirty and needed some serious tlc. It still needs some attention but is much better and quite usable now.That'll clean up nicely as well.

-
-
Camco and Lionsteel
'
Dean, I have one of these Camcos. Is yours unfinished on the bottom like mine? What I mean is, mine is ground/sanded down on the top (blade) side, but was not sanded down on the backspring side so that the scales and liners are flush.I've heard rumors that Camillus produced the Case barlows at one time, and I can certainly say that these Camco frames are spitting images of the Case barlows from the 70's, but the blade stock is a bit different.
Both of mine are the same as yours, not finish ground on the back at all. It left the handles raised over the springs and sharp.
I touched it very quickly with a belt sander just enough to lower the handles the second I hit spring I stopped. It's a comfortable user now.
-
Thanks! I'm planning to do the same.
-
I used a very worn out 120 grit belt.
-
I had a Camillus Rough Cut Stockman like this one that had proud liners and unfinished backsprings. I used my bench grinder which has a fine stone on it to smooth it out. I came out looking and feeling pretty good so I gave it to a buddy.

-
What's that pretty knife doin' in here? That ain't no Barlow!!
Thanks for the tip. I guess they were cutting corners a bit on these...
-
@NutSAK said:
What's that pretty knife doin' in here? That ain't no Barlow!!Thanks for the tip. I guess they were cutting corners a bit on these...
Steve tell me that's not a 3 blade barlow. :o
CAMCO was the Camillus budget line. You would think they would have at least evened the liners a bit, even if they didn't polish it.
-
Three bladed Barlow. I think there's a country song in that. :D
-
Nice ones guys! Packing the bear and son tonight


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login