Work gloves
-
I always have a few pairs of Mechanix Originals and Fast Fit for general purpose jobs.
I have heavy leather gloves for hauling out crap I cut out of the fenceline in the spring and summer. We have these awful thorn trees that grow very quickly and you do not want to grab a handful of those without some tough gloves. -
though here isn't often so cold to have to wear gloves at any time of the year (even in Winter), I like having them close.
I mostly carry them for work, but also carry an additional pair of Gardening Gloves in the EDC bag/man purse because I've found them useful on occasion for repairs, grabbing oily or dirty or sharp things, using tools, applying torque, or saving my hands in one way or another.

The ones I carry as a backup on my bag are like these.


Not heavy duty but enough for mosts tasks to prevent injury, damage or nasty results on your bare skin and hands
, mostly small blisters, skin pinching, scratches and small cuts 
Except for this time, when the blade went through the glove :P (mildly graphic)Spoiler:

-
Vinyl disposable gloves for painting and messy stuff and for work If I wear any it's the thin rubber coated kind these day. They give some protection and you can still pick up and hold nails and screws.
-
@Grant Lamontagne said:
I have many pairs of gloves because I can usually never find a pair when I need them....
But yeah, I have a case of disposable gloves for dirty stuff like painting and staining etc. Went through a lot of them while working on my kayak this summer.
Def
So true. Same with safety goggles. I don't beed them, I am tripping over piles of them. I desperately need safety goggles and bone are to be found. :ahhh
@ThePeacent said:
I mostly carry them for work, but also carry an additional pair of Gardening Gloves in the EDC bag/<u>man purse</u> because I've found them useful on occasion for repairs, grabbing oily or dirty or sharp things, using tools, applying torque, or saving my hands in one way or another.
The way I imagine you look has changed drastically.

-
Annnd cue photo of Grant in a dress......
-
I prefer thin, supple, leather gloves. I still need to be careful when dealing with thorny issues.

-
I mostly carry them for work, but also carry an additional pair of Gardening Gloves in the EDC bag/<u>man purse</u> because I've found them useful on occasion for repairs, grabbing oily or dirty or sharp things, using tools, applying torque, or saving my hands in one way or another.

The way I imagine you look has changed drastically.

it's this one


-
Careful amigo, you may lose the Spirit carrying it like that!
I also have several pairs of gloves like the orange ones you picture above- the fabric with the rubber on them. I find them very handy, but I tend to consider them as more or less disposable types, only using them a time or two, and not really keeping them around afterwards. Perhaps that is because I tend to use them for dirtier jobs involving harsh cleansers, resins and things like that. I do keep a pair like them in my work bag as well, and I usually buy them in multi- pack at Home Depot or Costco when I need them.
I have a nice pair of gloves that are similar, only the rubber covers them all the way up to the cuff, making them waterproof, which is great for working in the rain as they keep my hands dry. With the inner glove and occasionally the heater pack, they are ideal for working in the sub zero rain!
Def
-
@Grant Lamontagne said:
Careful amigo, you may lose the Spirit carrying it like that!don't worry Boss, it was just for the pic. Nothing is outside, too much attention they'd draw :ahhh
amd they are almost disposable to me as well, I buy them in 5 or 10 pair-packs for 8-12€
and go though several of them every season 
-
I also buy those in bulk. They can be reused, but when doing something really dirty can be taken off and simply disposed.
I have a spot in my landscaping that has poison ivy, so I have carefully disposed of several pair.
-
I use nitrile medical gloves for handling biohazardous materials and general filth, but those are obviously not suited for a lot of jobs.
At my actual work, in a medical facility, we use vinyl gloves.
-
Some of the glove types I have available from my employer There are nitrile coated gloves too.

-
@ThePeacent said:
it's this one

Nice setup, TP! I am now picturing you using that. Originally I always imagined you had a Batman belt of tools/knives.

-
I use single layer leather gloves sold with 4x4'ing in mind simply because they are comparatively cheap, they come in XL........and I go through them like TP while smithing!

Too funny to see how the fingers shrivel up from the heat, and inevitably I dunk my hand in water several times during a forging session, so when they dry out it's even more fun......
-
it's this one


Nice setup, TP! I am now picturing you using that. Originally I always imagined you had a Batman belt of tools/knives.

well I do have a "batman belt on me" :D but not that big or loaded
Usually I have at least one MT, SAK, Light and knife on the belt, and oftentimes a second of some of those or all.
The bag is mostly for backups, FAK; hygiene, etc. or additional tools
-
I will have to get a picture of my work gloves. Finally found a new job that I love and gloves are a must.
-
Looking forward to seeing them!
I keep at least one pair of work gloves in the Jeep at all times, as well as the ones at home and in my various work bags. There are two things that give me great joy in this world, and those are getting dirty with some good old fashioned mechanical work, and keeping my hands clean. One of these days a qualified therapist is going to make a fortune on the book they will write about me, but in the meantime I will keep getting dirty while trying to remain as clean as possible.

Def
-
Good to see I'm not the only ones with slightly compulsive thoughts about gloves...
I'm on a seemingly never ending quest to find the perfect work gloves for me. I just want them to fit perfectly, be nimble and flexible, light and thin, and protect against abrasives, hits, cuts, penetrations, hot, cold, wet, uv light and chemicals. Oh, and they should be airy, easy to clean and inexpensive too. I'm open minded about the color.. Maybe someone elses post in this thread will finally reveal the one to rule them all..
As I still haven't found those I've had to compromise and find a half decent to good compromise for each task at hand. (Pun intended). So grabbing some around here:
Picture 1. Various long sleeve gloves.
The thick leather ones are for stick welding and handling hot items. Too thick and cumbersome for fine controlled grip of anything, but they do protect well against your random hot flying metal bits. (Not to mention absentminded grabbing of very hot stuff).
The thick black leather are insulated winter working gloves. Some membrane in there somewhere makes them waterproof to the user - although the glove itself might get mighthy wet. I suspect they are not the best for abrasive work, so only used for half civil stuff.
The black and red rubbery gloves are waterproof, decently long lasting and fairly inexpensive. Normally used for not so precise handling of slimy or grimy stuff in cold water. Bad fit, bad mostly everything actually, but they are waterproof and crucially easy to clean afterwards.
Picture 2.
Neoprene gloves/ diver gloves. I don't dive, but when the above black and red ones are not precise enough for work with stuff in cold water these really helps. They are also warmer and better fitting. And way more expensive.
Some thinner neoprene work gloves with some padding for more normal or light abrasive work. Good overall gloves with good fit, but too expensive for normal grime duty.
Insulated gloves for normal light grime duty. Fairly decent fit, insulation and protection. I do expect them do wear down and out - and they do. Decent pair, but not my personal favorite.
Picture 3.
Some disposable gloves which are just a tad thicker than usual. For those times you really don't want a hole when messing about with grimy or etching stuff.
Then some bonafide normal thick and bad fitting ox gloves for proper abrasive work. I use these when working with stuff that would just make a hole in the other ones very quickly. Typically these fail too, but they last much longer and are fairly inexpensive. (So when one pair fails I already have a replacement laying ready).
Some insulated waterproof all around light abrasive work gloves. Good fit for me and quite civilian looking. While they are waterproof they are not breathing - thus sweat will make them wet. Still my first choice glove these days. In summer the nimble uninsulated non-waterproof version one is the favorite.



-
Then there are the more specialized ones. I try to not use these for anything besides their purpose. They tend to be on the expensive side, and cleanliness is typically important for the tasks where I use these.
Picture 1. Gloves for hot works.
These gloves for hot work are actually fairly nimble and well fitting, (as opposed to say thick welding gloves), so one maintains some fine control. Which can be important when handling hot stuff. The series also have a even thinner and nimbler model (which protects less), but that one simply wore out on me and I haven't gotten a new pair yet. I've also tried welding with these, and the welding itself go well. However they day after I had sunburns between my fingers along the seams - so not really useable for that.
Picture 2. Welding gloves.
The white long sleeved ones are your typical nimble TIG welding design. They work well for that, but the fit could be better - at least for me.
The leather look ones are bad fitting stick or MIG welding gloves. For what I do rarely ever need the thick long sleeve ones as these protect enough. These are much thinner, give better grip and control, and thus is what I typically use for that.
Then there are some very well fitting TIG gloves. I haven't actually used them much yet (still on those first ones), but looks quite promising I'd say. Certainly a better fit.
And last on the lower middle is a little finger glove for heat protection. Basically lets you rest your hand a bit on hot surfaces while working on them. It helps getting a bit better control and precision.


-
I bought a pair of Glova (Made in India?!). Let you maintain a certain sensibility in your fingers, so you can perform some delicate tasks but awlso offer good protection. Not for very hard tasks but for general repairs. Less than €4 a pair.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login