Super Steels ?
-
I second that: overrated and usually overpriced. Although having a super-steel blade may give you a fuzzy feeling of security and reassurance that "that's a super-steel", in the end of the day it's one of those matters of heat treatment and personal taste. I know many people who swear by their 'no-name' carbon or 1095 blades, while others will go no lower than a D2 or A2. Similarly, I've handled 420j2, 420hc, vic 'inox', 440a, 440c, 154cm, s30v and a couple of carbon steel variations; I keep reaching for my 420hc Buck, 440c Spyderco and Vic 'inox' blades. They can get shaving sharp in no time, will hold an edge for long enough for me to get the job done till the next retouching, and didn't cost me a fortune to acquire in the first place. Here is a nice doc on the various steels and how they compare to each other.
-
+1 on the VG10 :)
Superb real world steel

-
Ben will be getting another s30 v very shortly.
-
@hawkchucker said:
Ben will be getting another s30 v very shortly.
-
Moreover afaicr there used to be some issues with heat treatment in the early 154cm and s30v implementations. Anyway, I just can't understand those who go out and spend $300-$1000 for a darn folder, which is supposedly die-hard and destined to be a user. I surely like the looks of a Strider or a Sebbie and I'm 100% sure they are great knives, but at their price tag I'll equally surely pass... ::) Ok, rant off...
-
I hate to sound like a cliche but If I had to explaine it you would not understand it.
But I will give it a try. I became interested in super steels because of the longjevity of how the steel stays sharper and stays sharper longer. Does it make a big diff. No but yes. I love the idea of owning a Lotus but I know I cannot own one. But I can own a Sebbie. or a griptillian in d2, but super steels come in all price ranges. you can still buy spidies in s30v cheap, and several d2 benchmades also. so I guess you really dont need the sebbie, but it really is a cool ride.
-
What I'm trying to say, and not doing a very good job at is simple. If you want something in a "super steel", that's great, go ahead and get it. I'm not going to try and tell anyone what they "need" or what they should "want". Just trying to educate them on the realities. I mean, I can go out and buy the best, newest and most expensive golf clubs on the planet, but I'm still not going to be Tiger Woods.
You can go out and buy a knife with the latest and greatest "super steel" out there, but you still aren't going to cut that cardboard, apple, rope, or skin a deer a whole lot better than I can with my SAK or Buck or 1095 carbon steel blade knife.
And respectfully to hawchucker,. Trust me, there is very little I don't understand.
Mike
-
Mike sorry if you took offence to my post, but it was not ment to insinuate anything. Just my reason for why I like the Sebbie and the higher end steels. It is just something I like. Nothing more or less. If you dont, more power to you.
-
@hawkchucker said:
Mike sorry if you took offence to my post, but it was not ment to insinuate anything. Just my reason for why I like the Sebbie and the higher end steels. It is just something I like. Nothing more or less. If you dont, more power to you.No offense taken, no worries.

Mike
-
You gotta try ZDP189, but you NEED to reprofile it down to very acute angle, something at most 30° (people do 12° edge on it), it will actually hold that edge for reasonable amount of time.
But to be honest most of us don't need super steels, we just get them for the sake of it.
Oh if you haven't seen this before, it goes over most of the steel on market today briefly.
-
Lol.
-
I have been questioning super steels a lot lately.. I really like super steels, but they are a PITA to sharpen. Not only that, but the harder steels have a tendency to "chip". (especially S30V) It's very much like the Gerber's tungsten carbide wire cutters; they're so hard- they chip.. Out of all the super steels, I like 154CM the best.. :)
-
if their chipping they are not heat treated right, a major element in good steel
and if they don't have a lifetime warranty to cover that, I'd question that maker.
super steels don't chip! that's one of the reasons we call them that! they have a
bend of properties (a result of heat treating) that makes them tough as nails
yet soft enough to not break or chip. -
You think so? I have had some very expensive S30V blades chip.
-
again that is poor heat treating, not the steel ::)
-
It seems to me I read somewhere that on some knives, the heat treat was an issue on the edges. But if you took them down just ever so slightly (via normal sharpening), you got into the properly heat treated steel and would no longer have the chipping issues. I can't remember where I read this or if it was ever reliably proven to be true. Just something in my memory bank somewhere.
Anyhow, people should get what they want, or like, and of course need. But do the research so you know what you're getting into. Guess that could be said for everything though.
Mike
-
Well thanks for the varied opinions and the extra links into the properties of steel. I will review them. You know I probably don't need a super steel but my folders are all old style knives with old style steels and they have served me well. But I would like to try something different, something with a modern look and with g-10 scales. I love the look of the Emerson line and they are really not all that badly priced I don't think.
sean
-
Hey Sean - I am a self confessed knife newb and was looking recently at how much difference these fancy steels actually make, and read a load of opinions just like the ones on this thread! I've figured out that the S30V blade on my Charge TTi seems to stay sharper longer than the 440 blade on my Core, but it'll be a while yet before I can definitively say that S30V is worth the extra bucks!
I reckon the way to go is to pick the knife you like the look of (i.e. the Emerson) and get it. Noone has slated them, so it looks as though it'll do the job, then in time you'll decide whether you need anything better, based on your own experiences
I only have a very few knives, and the ones I like and use most have nothing to do with the steel, it's all about how comfortable they feel in my hand.
Like I say, I'm a million miles from being an expert on knives and steels, but I say "If it feels good - do it"!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login