Hello All...
-
Lots of tools out there. Depending on what you're looking for, also check out Columbia River Knife and Tool. They have some cool MT's too.
..and Welcome.

-
Welcome to the forum buddy. :)
-
Welcome to the forum

-
thanks for the warm welcome guys..
can anyone list tools and tell me where they are made though?
-
Well, there are literally hundreds of tools Aero - it would not be a simple task.
As a general rule, older Gerbers, Leatherman, SOG, Bear &Son, CRKT (I think) are US made, Victorinox and Wenger are Swiss made.
But as I said previously, some newer Gerber models are made in China.
Best thing to do really is think about what you want in a tool, then people can give you some ideas and tell you where they are made.
-
i really dont know what i am looking for in a tool yet as i just got the idea that i would like to start carrying a multitool around with me.
buying from a company that is reputable and offers a good warranty would mean alot to me.
any input?
-
Well, all of the companies mentioned so far will make some good tools and have long warranties, they are really the leaders in the multitool world.
Personally, I prefer Leatherman to just about all of the others, but you will find guys that favour SOG or Victorinox or Gerber, purely because there's some characteristic or feature of the tool that suits them better. It's quite a personal thing.
It sounds though you're after something just to be prepared for whatever might crop up in every day life?
If you go to the homepage here: www.multitool.org you'll find reviews on most of the better brands and models - maybe something you'll find there will take your fancy?
-
Welcome to the forum, Aero! Have you considered the Leatherman Blast? It's a good place to start.. Then you could go smaller or bigger if you need.. It's around $50..
-
from the leatherman designs i really seem to like the following:
1st choice:Skeletool CX
2nd choice:Skeletool
3rd choice:Charge XTi
the rest i didnt really like.
i looked at the pros on these and they seemed to be good.
i think i like them though b/c of thier styling and design.
now to go look at gerber selection.
will report back!
:D -
Welcome to the forum

I have the regular Skeletool (plain edge preference) and it's a great edc minimalist multi, add a SAK (Swiss Army Knife) to that as a supplement and you'll be set for most tasks.
-
sorry.. newbie here.... what does "EDC" mean?

-
Welcome to the forum

-
Welcome to the forum- nice to see another Canucklehead in the mix!
I wouldn't worry too much about where a tool was made- borders are just lines on a map these days, and while China may be the source for a lot of "crap" tools, they are also capable of making some good stuff- CRKT's stuff is made in China or Taiwan, and is very good quality. You just have to stay away from the Wal Mart/Home Depot type brands, or tools with no brand at all.
Of course, to combat the growing number of cheapies out there, Gerber has come up with an inexpensive line of tools that should really be avoided by the serious user, and is not indicative of their overall quality. It's an experiment that hasn't endeared them to many people, but I am sure the sales of these tools is solid as they are distributed through the big box stores.
You really can't go wrong with Leatherman, but be warned that the Skeletool series are somewhat limited in comparison to other models, and other brands. True, they have managed to incorporate a respectable number of options into a small package (knife blade, pliers, wire cutters, 4 screwdrivers, bottle opener, carabiner and pocket clip) but it doesn't have the versatility of a standard sized tool. And, the carabiner and bit driver puts it in the regular sized tool category, at least as far as length is concerned. So, for example, if you are a woods guy, you might want to reconsider the Skeletools as they don't have saws. It is however, just about the perfect size for the average person's daily tasks around the home or office, and light enough to carry on walks or hikes.
Of course the big problem around here is if you ask what the best tool is for _______, you'll get a hundred different answers! :D
Def
-
yeah i hear you.. i am trying to get involved with some search and resuce stuff and ive been doing alot of reading on the charge xti and think it would be a better fit.
also in school for policing so id like a tool that would be useful on the job and also as a everyday tool / S &R tool too.
any input or suggestions?
i am not brand specific really ... more open to a tool that will benefit me in the 3 things i would be using it for.. price is not a issue as i will buy a tool that i know is going to benefit me.
-
The Charge XTi is a discontinued model; the Charge ALX (same thing but with aluminum handles) took it's place.. Have you considered the Charge TTi? It combines the XTi and Ti.. It has the crimpers on the pliers, an S30V blade (excellent and exclusive to the TTi), large flat head screwdriver (exellent for pushing, probing, poking!) the gut hook on the back of the serrated blade, and scissors.. It doesn't have two large bit drivers but it has one large and the small eyeglass driver. Two bit drivers is unnecessary IMO, the excellent leather or nylon sheath (included with any Charge) has an elastic sleeve in the inside of the sheath to hold the bits; so you can hold just as many bits- but you would need to switch them out accordingly.
The Charge makes an excellent on the job/ everday tool because it has many carry options (sheath, pocket clip, lanyard ring), premium knife blade material, extremely versatile bit driver (you can buy a 21 piece double sided bit kit with an assortment of bits), and the Charge's handle scales are more scratch resistant than stainless steel handles..
As I said, I recommend the TTi; as it's taking the Ti and XTi and combining them.. It runs from $100-120 USD online..
I hope this helps..

-
@Leatherman123 said:
The Charge XTi is a discontinued model; the Charge ALX (same thing but with aluminum handles) took it's place.. Have you considered the Charge TTi? It combines the XTi and Ti.. It has the crimpers on the pliers, an S30V blade (excellent and exclusive to the TTi), large flat head screwdriver (exellent for pushing, probing, poking!) the gut hook on the back of the serrated blade, and scissors.. It doesn't have two large bit drivers but it has one large and the small eyeglass driver. Two bit drivers is unnecessary IMO, the excellent leather or nylon sheath (included with any Charge) has an elastic sleeve in the inside of the sheath to hold the bits; so you can hold just as many bits- but you would need to switch them out accordingly.The Charge makes an excellent on the job/ everday tool because it has many carry options (sheath, pocket clip, lanyard ring), premium knife blade material, extremely versatile bit driver (you can buy a 21 piece double sided bit kit with an assortment of bits), and the Charge's handle scales are more scratch resistant than stainless steel handles..
As I said, I recommend the TTi; as it's taking the Ti and XTi and combining them.. It runs from $100-120 USD online..
I hope this helps..

checked out the TTI its the cabelas exclusive... not a fan of the camo colouring on it :(
-
There's a regular TTi and the Camo versions (Cabelas and Bass Pro Shops).
http://www.leatherman.com/multi-tools/full-size-tools/charge-tti.aspx
-
Core, maybe a SURGE, possibly a Swisstool, you could consider a Wave.
:ahhhAnd welcome.

Mike
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login