The haunting of the Spirit (October 30 day Spirit Challenge)
-
@Dutch_Tooler said:
Thanks Matt
About the hook, I agree it has a function in keeping the awl reachable... but as a hook it's awkwardly located, thus quite a compromise (and not central, but at a handle end, making the "parcel carrier" aspect a little awkward too)... and a longer still reachable awl would have been equally possible by suitably profiling the tang end...
The lanyard: well yes, you could use the corkscrew support(s). You'll forgive me for not finding that very elegant... One could use both of them to keep the tool balanced, but still
Somehow these solutions are not in keeping with Vic philosophy as I've come to appreciate it. Some kind of lanyard with holding clips fitting the corkscrew holes should be possible... what if... mumble mumble...


-
Day 30:
The last day of the challenge!

Since tomorrow is Halloween, here are my attempts at some spooky spirit pics


-
Concluding thoughts:
Well, firstly, thanks to Styx for kicking off the challenge. With this, I have now completed the trifecta of 30 day challenge badges for tools I commonly use: the minimal SAK, 111mm and spirit.

As far as the spirit is concerned, what did this challenge show me? Honestly, it more confirmed again what I already knew. For me, the spirit is the best pliers based multi out there. After a period of trial and error several years ago, this is what I settled on for reasons we probably all know: build quality, tool density, fit and finish, warranty, etc.
That being said, given my current career path it is unlikely a pliers based multi will ever be an edc item for me. Its just too big and bulky for how little I need the added capability. Honestly, most of the time my spirits rarely see any use, as I usually have a dedicated, full-sized tool at hand. This has effectively relegated the spirit to a back up, emergency use type role for me.
All that being said, it is a supremely capable tool, and one that has won a spot as my only pliers based multi.

-
A day on the domestic front using the Spirit's phenomenal blade to open bags of salt for the water softener and mulch for the flower beds.


-
Great posts and photo’s!

-
@gustophersmob said:
Day 30:The last day of the challenge!

Since tomorrow is Halloween, here are my attempts at some spooky spirit pics
Ok, the second photo is a winner! It looks like a creature and it’s eye is the Vic crest!

-
Day 30:
The last day of the challenge!

Since tomorrow is Halloween, here are my attempts at some spooky spirit pics
Ok, the second photo is a winner! It looks like a creature and it’s eye is the Vic crest!

Ha, thanks. I didn't even think about it that way!
-
Day 30:
The last day of the challenge!

Since tomorrow is Halloween, here are my attempts at some spooky spirit pics
Ok, the second photo is a winner! It looks like a creature and it’s eye is the Vic crest!

Ha, thanks. I didn't even think about it that way!

-
Great action pics again today guys

-
excellent pics and uses guys

-
Day 28
This was a bit of a busy day here painting sealings. The Spirit helped making a cover from a garbage bag, removing loose splinters from a stick so it doesn't end-up in the paint, securing new felt pads for the ladder and tightening a loose screw on an electrical terminal (the N of the lamp was loose :o )...




-
Day 30
Used the cutters to remove cables from some scrap accelerometers, nice clean cut!
To be continued...............


-
Day 30/30
Last job to my Spirit was opening my workphone so i could add second simcard in it.
Now that challenge is over im gonna say that i might keep Spirit in my edc few more days , especially cause of multiblade first i thinked that im not carry this anymore but got second tought of it and decided to try it with other tools.
Only Tools Matters
-
Great posts and photos...well done Challenge everyone.

-
Day 30.
The Haunting of the Turnip .......
It's been a fun challenge thank you Styx and it's been good to rely upon the Spirit. I don't need one as EDC but that doesn't mean it hasn't been good carrying one as a choice. And I think it is a much more polished (literally) tool than my LM Wave. With the Plus tools and a corkscrew (with mini screwdriver) it has everything I need.

-
Day 30
The spirit is a wonderful companion out in the woods and also at work in the office.
It will stay in my EDC.

-
Day 30. Continued.......
Firstly thanks to Styx for organising this challenge and thanks to all the other participants for their excellent posts and pictures.
When I first got my Spirit, my first thoughts were "it's much too shiny to be a serious multitool"
So, when Styx dreamt up this challenge I thought it was a good opportunity to put it to the test.
And test it I did, undoing tough screws, prying, filing steel shafts, even cutting steel shims with the scissors to no ill effect!
I love the pliers with their slightly stubby tips and the fine serrations on the grips, the cutters work great too.
Overall it packs so much into a relatively small form factor and I like how all the tools open from the outside.
The separate bit kit and wrench is brilliant, and as I've said before i prefer it to the Leatherman bit driver.
I can't really think of anything negative to say about it, apart from maybe the size of the scissors!
I've really put it to the test over the last 30 days, it's still smooth to operate, all the tools work as they should and it still looks great, and..........
...... It's still shiny :o -
day 30 - oddly little to do so fixed this Zippo
I wanted this challenge because the Spirit has been a part of my edc in some shape or form since the day I got my paws on it. One of the more interesting things about it is how it shows me what I need in my EDC and what is overkill. For instance I need a smaller, more precise blade like an electrician blade. I could use some scissors. Having an awl and a saw while a must in the past are not often used in my current job. So I'll be looking at an Alox Minichamp
However the Spirit still is a very capable tool that might be a bit too much for pocket carry in the office but as that EDC bag tool that gets pulled out when things get serious it fits the bill perfectly -
This has been a excellent challenge everyone

-
Nice summary Phil! I've learned a new respect for this tool, and I really think it's going to be my hiking/camping edc. It compares favorably, in my opinion, with the Craftsman which seems to come pretty close toolwise. I think the Spirit will pocket carry better though!@Fast Bill said:
Day 30.The Haunting of the Turnip .......
It's been a fun challenge thank you Styx and it's been good to rely upon the Spirit. I don't need one as EDC but that doesn't mean it hasn't been good carrying one as a choice. And I think it is a much more polished (literally) tool than my LM Wave. With the Plus tools and a corkscrew (with mini screwdriver) it has everything I need.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

