The SAK Whittling Club
-
Welcome back Stoneshank! I like your saggy bottom rhino!
-
Haha thanks. I like those African animals. They could be described as a tad "fat" which makes them fun to make. The baby versions of them also makes people less afraid of someone sitting with a tool such as a knife where other people are around. Also, ofc, very popular amongst kids which makes their parents less protective and prone to over reacting when they see a knife. People can react so silly when they see a 1cm long knifeblade
- stoneshank
-
Hi everyone
Here is my first attempt to create something :)
It was a lot of fun fun was really hard to cut the wood. I used a small block of basswood, but, looking at the clips online, mine seemed MUCH harder. Especially when going parallel to the fibers it was almost impossible to stick the knife in the wood. SOmetimes i had to put it on my table to push harder. Do you think there could be a reason? I used a block that i cut from a bigger block and even cut it from there was a pain in the butt using a small hand saw... Maybe there are different kinds of basswood (mine was for contruction, not for "arts").I used a brand new tinker, stropping it also from time to time.
I saw people do a model like that in 20-30 min. It took me like 2 hours, because it was difficult to remove big portions one tiny bit the time. Tomorrow i will go searching for a different block. I hope to not have tendinitis tomorrow due to the efforts :D
Cheers

-
Even if it was hard to cut the result is very good

Sent fra min FRD-L09 via Tapatalk
-
Aww cute! I gotta try my hand at carving, everything’s sitting at my little workstation, I just haven’t pushed myself to do it..
JR -
@ghiekorg said:
Hi everyone
Here is my first attempt to create something :)
It was a lot of fun fun was really hard to cut the wood. I used a small block of basswood, but, looking at the clips online, mine seemed MUCH harder. Especially when going parallel to the fibers it was almost impossible to stick the knife in the wood. SOmetimes i had to put it on my table to push harder. Do you think there could be a reason? I used a block that i cut from a bigger block and even cut it from there was a pain in the butt using a small hand saw... Maybe there are different kinds of basswood (mine was for contruction, not for "arts").I used a brand new tinker, stropping it also from time to time.
I saw people do a model like that in 20-30 min. It took me like 2 hours, because it was difficult to remove big portions one tiny bit the time. Tomorrow i will go searching for a different block. I hope to not have tendinitis tomorrow due to the efforts :D
Cheers
That is a great job well done!

-
Love it ghiekorg

-
Thank you everyone.
Today I whittled a small elephant [emoji4] I realized how important is to follow the fibers of the wood. Still some parts were hard like stone and other soft like butter. I am now going to another shop to check for other wood, maybe I am luckier this time.
Also I definitely need to learn how to sharp properly my knives. I mean they cut paper like air, but still I can’t make the razor sharp, I guess that’s not helping.
Cheers :)Sent from my iPhone using Tapatalk
-
@ghiekorg said:
Thank you everyone.
Today I whittled a small elephant [emoji4] I realized how important is to follow the fibers of the wood. Still some parts were hard like stone and other soft like butter. I am now going to another shop to check for other wood, maybe I am luckier this time.
Also I definitely need to learn how to sharp properly my knives. I mean they cut paper like air, but still I can’t make the razor sharp, I guess that’s not helping.
Cheers :)Sent from my iPhone using Tapatalk
Great job, your little person looks awesome, despite your problems.
I think you've identified the two key problems. Make sure your edge is very sharp, and also you might need to make it more acute than the factory edge. When cutting straight across the grain, rock the edge or even slice a little will help to cut. If you don't need a cut perfectly perpendicular to the grain then a v cut will be easier than a stop cut.
Depending on which part of the tree your wood came from, there can be harder and softer sections. These might show as changes in colour along the grain or even texture. I'm not familiar with basswood though.
Please show us your elephant
-
Thank you everyone.
Today I whittled a small elephant [emoji4] I realized how important is to follow the fibers of the wood. Still some parts were hard like stone and other soft like butter. I am now going to another shop to check for other wood, maybe I am luckier this time.
Also I definitely need to learn how to sharp properly my knives. I mean they cut paper like air, but still I can’t make the razor sharp, I guess that’s not helping.
Cheers :)Sent from my iPhone using Tapatalk
Great job, your little person looks awesome, despite your problems.
I think you've identified the two key problems. Make sure your edge is very sharp, and also you might need to make it more acute than the factory edge. When cutting straight across the grain, rock the edge or even slice a little will help to cut. If you don't need a cut perfectly perpendicular to the grain then a v cut will be easier than a stop cut.
Depending on which part of the tree your wood came from, there can be harder and softer sections. These might show as changes in colour along the grain or even texture. I'm not familiar with basswood though.
Please show us your elephant
2nd on the elephant!

-
Thank you, these tips are actually really helpful.

The elephant is a gift for my gf, when i see her, if she likes it, I will post a pic [emoji16]
Yesterday in the meanwhile I tried to go “free hand” and I did this 47 from “hitman”. That’s pine and not basswood. I didn’t notice much of a difference. It just seemed to have more knots. I still have to understand a lot of things, as you can see [emoji4]

.
-
@ghiekorg said:
Thank you, these tips are actually really helpful.
The elephant is a gift for my gf, when i see her, if she likes it, I will post a pic [emoji16]
Yesterday in the meanwhile I tried to go “free hand” and I did this 47 from “hitman”. That’s pine and not basswood. I didn’t notice much of a difference. It just seemed to have more knots. I still have to understand a lot of things, as you can see [emoji4]

.
Good movie, great free hand for sure!

You are doing very well.
-
Good movie, great free hand for sure!

You are doing very well.

next up, the nuns! :DThe nuns...oh boy...and do you have a favorite? The one with the rocket launcher, or....

-
@ghiekorg said:
Thank you, these tips are actually really helpful.
The elephant is a gift for my gf, when i see her, if she likes it, I will post a pic [emoji16]
Yesterday in the meanwhile I tried to go “free hand” and I did this 47 from “hitman”. That’s pine and not basswood. I didn’t notice much of a difference. It just seemed to have more knots. I still have to understand a lot of things, as you can see [emoji4]

.

I reckon she's going to be very happy with her Elephant

-
@TazzieRob said:
I think I've done enough with this little bear. I could give him some v-cuts for fur, but the wood grain kind of looks like fur anyway. I'm pretty happy as a first attempt

-
This is interesting. A Hiker SAK, Victorinox Swiss Army Knife Whittling Book and a pair of Level 5 gloves (gloves optional, but HIGHLY recommend for me) is it and bingo let the fun (or hilarious mistakes) begin? -
Thank you everyone.

@GrandpaPatch said:
(gloves optional, but HIGHLY recommend for me)I couldn't agree more. I would be at the hospital probably if i didn't use them. :D
First of all, without them, it's much more painful, for me, to push the blade through the wood after whittling for long. But the most important thing is, of course, the protection from cuts. Yesterday i was using the large blade and i can't remember how but it closed really hard clapping my fingers. My gloves have a kind of gummy cut-resistent coat, well, the blade cut it but didn't cut the whole glove. I guess without them now i would have, at least, stitches on my fingers.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login