Work gloves
-
@ThePeacent said:
it's this one

Nice setup, TP! I am now picturing you using that. Originally I always imagined you had a Batman belt of tools/knives.

-
I use single layer leather gloves sold with 4x4'ing in mind simply because they are comparatively cheap, they come in XL........and I go through them like TP while smithing!

Too funny to see how the fingers shrivel up from the heat, and inevitably I dunk my hand in water several times during a forging session, so when they dry out it's even more fun......
-
it's this one


Nice setup, TP! I am now picturing you using that. Originally I always imagined you had a Batman belt of tools/knives.

well I do have a "batman belt on me" :D but not that big or loaded
Usually I have at least one MT, SAK, Light and knife on the belt, and oftentimes a second of some of those or all.
The bag is mostly for backups, FAK; hygiene, etc. or additional tools
-
I will have to get a picture of my work gloves. Finally found a new job that I love and gloves are a must.
-
Looking forward to seeing them!
I keep at least one pair of work gloves in the Jeep at all times, as well as the ones at home and in my various work bags. There are two things that give me great joy in this world, and those are getting dirty with some good old fashioned mechanical work, and keeping my hands clean. One of these days a qualified therapist is going to make a fortune on the book they will write about me, but in the meantime I will keep getting dirty while trying to remain as clean as possible.

Def
-
Good to see I'm not the only ones with slightly compulsive thoughts about gloves...
I'm on a seemingly never ending quest to find the perfect work gloves for me. I just want them to fit perfectly, be nimble and flexible, light and thin, and protect against abrasives, hits, cuts, penetrations, hot, cold, wet, uv light and chemicals. Oh, and they should be airy, easy to clean and inexpensive too. I'm open minded about the color.. Maybe someone elses post in this thread will finally reveal the one to rule them all..
As I still haven't found those I've had to compromise and find a half decent to good compromise for each task at hand. (Pun intended). So grabbing some around here:
Picture 1. Various long sleeve gloves.
The thick leather ones are for stick welding and handling hot items. Too thick and cumbersome for fine controlled grip of anything, but they do protect well against your random hot flying metal bits. (Not to mention absentminded grabbing of very hot stuff).
The thick black leather are insulated winter working gloves. Some membrane in there somewhere makes them waterproof to the user - although the glove itself might get mighthy wet. I suspect they are not the best for abrasive work, so only used for half civil stuff.
The black and red rubbery gloves are waterproof, decently long lasting and fairly inexpensive. Normally used for not so precise handling of slimy or grimy stuff in cold water. Bad fit, bad mostly everything actually, but they are waterproof and crucially easy to clean afterwards.
Picture 2.
Neoprene gloves/ diver gloves. I don't dive, but when the above black and red ones are not precise enough for work with stuff in cold water these really helps. They are also warmer and better fitting. And way more expensive.
Some thinner neoprene work gloves with some padding for more normal or light abrasive work. Good overall gloves with good fit, but too expensive for normal grime duty.
Insulated gloves for normal light grime duty. Fairly decent fit, insulation and protection. I do expect them do wear down and out - and they do. Decent pair, but not my personal favorite.
Picture 3.
Some disposable gloves which are just a tad thicker than usual. For those times you really don't want a hole when messing about with grimy or etching stuff.
Then some bonafide normal thick and bad fitting ox gloves for proper abrasive work. I use these when working with stuff that would just make a hole in the other ones very quickly. Typically these fail too, but they last much longer and are fairly inexpensive. (So when one pair fails I already have a replacement laying ready).
Some insulated waterproof all around light abrasive work gloves. Good fit for me and quite civilian looking. While they are waterproof they are not breathing - thus sweat will make them wet. Still my first choice glove these days. In summer the nimble uninsulated non-waterproof version one is the favorite.



-
Then there are the more specialized ones. I try to not use these for anything besides their purpose. They tend to be on the expensive side, and cleanliness is typically important for the tasks where I use these.
Picture 1. Gloves for hot works.
These gloves for hot work are actually fairly nimble and well fitting, (as opposed to say thick welding gloves), so one maintains some fine control. Which can be important when handling hot stuff. The series also have a even thinner and nimbler model (which protects less), but that one simply wore out on me and I haven't gotten a new pair yet. I've also tried welding with these, and the welding itself go well. However they day after I had sunburns between my fingers along the seams - so not really useable for that.
Picture 2. Welding gloves.
The white long sleeved ones are your typical nimble TIG welding design. They work well for that, but the fit could be better - at least for me.
The leather look ones are bad fitting stick or MIG welding gloves. For what I do rarely ever need the thick long sleeve ones as these protect enough. These are much thinner, give better grip and control, and thus is what I typically use for that.
Then there are some very well fitting TIG gloves. I haven't actually used them much yet (still on those first ones), but looks quite promising I'd say. Certainly a better fit.
And last on the lower middle is a little finger glove for heat protection. Basically lets you rest your hand a bit on hot surfaces while working on them. It helps getting a bit better control and precision.


-
I bought a pair of Glova (Made in India?!). Let you maintain a certain sensibility in your fingers, so you can perform some delicate tasks but awlso offer good protection. Not for very hard tasks but for general repairs. Less than €4 a pair.

-
I only own 3 gloves. A pair of leather driving gloves for winter use, I hate cold surfaces. And I have 1 left hand leather welding glove. I just can't work in gloves, but wear one on my left hand when having to hold pieces I'm welding or cutting with the torch.

-
I really need to get some pics of my work gloves. I use mine every day and they take a beating so I’m always on the lookout for a good pair that keeps dexterity loss to a minimum. I’ll try and snap a pic.
-
@papadan said:
I only own 3 gloves. A pair of leather driving gloves for winter use, I hate cold surfaces. And I have 1 left hand leather welding glove. I just can't work in gloves, but wear one on my left hand when having to hold pieces I'm welding or cutting with the torch.
Thus my search for better and better gloves. I hated having to take them off all the time to do things. I still do with the mechanic type gloves, but they do allow me to do a lot more with them on.
Def
-
@Grant Lamontagne said:
I only own 3 gloves. A pair of leather driving gloves for winter use, I hate cold surfaces. And I have 1 left hand leather welding glove. I just can't work in gloves, but wear one on my left hand when having to hold pieces I'm welding or cutting with the torch.

Thus my search for better and better gloves. I hated having to take them off all the time to do things. I still do with the mechanic type gloves, but they do allow me to do a lot more with them on.
Def
I normally use Mechanix gloves as they take a beating and don’t rip as fast as others I have tried, but leave me with some dexterity.
-
I like to use the Mechanix Mpact’s and keep a box of those disposable latex gloves (the thicker ones) for anything chemical
Works well

-
I know many people like the Mechanix line,
I find them a bit garish, so I tend to favour IronClad (I just get the Utility ones, nothing special)
As I ride bikes, some of those gloves "retire" to work use (and work gloves "retire" to gardening use)
(Apparently that is my order of priority for glove care/condition - Bikes/Work/Digging )
-
Winter wear--cheap jersey underneath a heavy pair of leather rancher's gloves which I'd found in a glove box (ha!) of an unused vehicle. They're really well made. They're also thick enough to where sharp stuff (thorns, sharp metal, barbed wire) doesn't do anything.
Usual wear: Craftsman knockoff of the Mechanix gloves I bought years ago at Sears (when we still had one, which has been more than 5 years now).
And there's the 4 pairs or so of welder's gloves we keep in the farm shop for welder and torch work. They're really just communal. Not one pair actually belongs to anyone; and my grandfather and I just pick up whatever we get to first.
Dirty work: various kinds of exam gloves. Also keep a few pairs of those in the first aid kit.
I need to check into cut resistant work gloves--anyone recommend a specific pair (and I'm not talking the chain-mail Teutonic looking things sold for food-service).
-
Back when I worked in the tactical ninja/black ops wannabe world, Hatch was the best name in cut resistant gloves that looked like normal gloves. I don't know if that is still the case but it's a starting point.... and pretty much the only info I have on the topic.
Def
-
I went from no gloves working in IT to full on herbicide and pesticide commercial applicator/sales here in Texas. Dealing with some real nasty stuff these days. I have a backpack full of gloves depending on what I'm doing.
We can't use cotton as it holds the chemical next to the skin causing dermal contact. I have some synthetic rubber gloves for mixing chemicals, leather for spraying and dealing with a muddy , wet hose.What I can't understand is people who don't take care of their high dollar leather gloves. I clean my daily and put back in my backpack with my eyewear, hearing protection, yellow vest and hard hat. I see gloves left everywhere caked in chemical and dirt. Our company springs for nice deerskin gloves.

-
I am one of those that doesn't really take care of my gloves properly.... I wear them until they disintegrate off my hands and only wash them occasionally, but then most of the leather bits on mine are only simulated leather.
I feel like if I had nice deerskin gloves I wouldn't want to use them that hard, and that would defeat their purpose.
Def
-
i'm on the hunt for some good work gloves to get me thru the first part of summer.
Trying to find abrasion resistant, waterproof leather gloves. We use a blue dye that stains everything and when my gloves get wet i have smurfing smurf hands. ::) :Dthese worked pretty good for a couple of months before the hose and sand wore holes thru the fingers.
https://www.acehardware.com/departments/home-and-decor/apparel/gloves/7314404 -
I am not sure I would bother with leather in a situation like that- maybe a kevlar or other composite weave glove with a latex dip on it would be better suited?
Just a thought.
Def
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login