Mini Ratchet Chatter
-
It's a bit ratchet, not a bolt ratchet [emoji38]
I also think the lever doesn't take stress. The gears do...
-
I count 36 clicks on my Vic ratchet to make a full 360 deg turn.
-
Nice ! Thanks !
Now the Topeak and it will be perfect :-)
-
Granddad gave me a 1316 set. Unlike the "Pocket Pack" it has a decent selection of bits, and still fits in a front pocket. I used to carry it a lot. Need to gather everything back up, replace the missing bits, and put it in my small tool bag I keep in my room.
404 Not Found
Chapman MFG - Made in the USA for over 80 years, Chapman provides a variety of screwdriver sets for industrial assembly, maintenance, home repairs, and more. From our famous mini ratchet to our Master set, you will surely find the right fit for your precision job!
Chapman Manufacturing (chapmanmfg.com)
-
It's funny that this thread should come up right now- we may or may not be working with Chapman to distribute ratchets through The Multitool.org Store. :D
You know, in case anyone is interested in that sort of thing....
Def
-
That is quite a coincidence, Grant!
Extra interesting that this thread came up the same week I found this in a Rubbermaid container under my bed. I don't remember where it came from. :ahhhReversible as well with a 1/4" socket adapter. Socket adapter is covered with a finger wheel when using the hex bit holder. Ball detent bit holder is a good feature as well, as I dislike magnetic bit holders(I use a lot of fine steel at work and the wool dust will find any magnets within a few feet). :ahhh
20 teeth chatter. :)



-
Grant, I'll hold off ordering right now. Maybe you can get a deal with the MTO logo on the boxes. Then I'll place my order here.

-
@lovecraft25 said:
Nice ! Thanks !Now the Topeak and it will be perfect :-)
I've counted 52 on the Topeak

-
@papadan said:
Grant, I'll hold off ordering right now. Maybe you can get a deal with the MTO logo on the boxes. Then I'll place my order here.

That was an option last month, but unfortunately we weren't able to take advantage of it. Perhaps we will have another option in the future.
For now, if anyone is interested in placing an order for one, please feel free to send me a PM and I can add it to my initial order.... although with the Canada Post strike on now and the hold up on the hats, I am not sure when that will be. And, I am not going to take any money from anyone until I do, but it would be good to know who is interested. :D
Def
-
Ahhh thank you Magentus!
Chapman - 20 teeth (18° arc) - 22.6 Nm
Victorinox - 36 teeth (10° arc) - 30 Nm
Topeak - 52 teeth (7° arc) - 30NmSeen like that, it's hard to hesitate (and here, the Topeak is also the cheapest ! 26 EUR shipped).
Topeak should work just fine in very tight places ! But wouldn't the teeth be tiny/fragile compared to Vic' or Chapman ?...
-
@lovecraft25 said:
Ahhh thank you Magentus!Chapman - 20 teeth (18° arc) - 22.6 Nm
Victorinox - 36 teeth (10° arc) - 30 Nm
Topeak - 52 teeth (7° arc) - 30NmSeen like that, it's hard to hesitate (and here, the Topeak is also the cheapest ! 26 EUR shipped).
Topeak should work just fine in very tight places ! But wouldn't the teeth be tiny/fragile compared to Vic' or Chapman ?...
I've had mine for a couple of years and used it a lot. You can apply a lot of pressure to it - not broken yet!

-
I'll add in the Wera Zyklop mini ratchet
60 teeth - 65Nm

-
@Grant Lamontagne said:
It's funny that this thread should come up right now- we may or may not be working with Chapman to distribute ratchets through The Multitool.org Store. :DYou know, in case anyone is interested in that sort of thing....
Def
Where? I don't see them on there
-
@Grant Lamontagne said:
It's funny that this thread should come up right now- we may or may not be working with Chapman to distribute ratchets through The Multitool.org Store. :D
You know, in case anyone is interested in that sort of thing....
Def
Where? I don't see them on there
i have yet to place an initial order with them, so I don't have any listed.
Def
-
My Topeak Ratchet Rocket...

-
All the LM bits also fit, as well as the LM Bit Extender

:D
-
I really like the toothless clutched models in general and they seem pretty tough to me too!
This one is obviously really tiny but solid at the same time.
The 1/4" socket holder part slides through to the other side to switch direction and they come in a set with one like this and one with a socket for 1/4" bits.
I just got a flyer from Northern Tool here and the set will be on sale for $10 this Weekend,I highly recommend them for the price.

Sent from my iPhone using Tapatalk
-
@Grant Lamontagne said:
@Grant Lamontagne said:
It's funny that this thread should come up right now- we may or may not be working with Chapman to distribute ratchets through The Multitool.org Store. :D
You know, in case anyone is interested in that sort of thing....
Def
Where? I don't see them on there
i have yet to place an initial order with them, so I don't have any listed.
Def
Ah ok. They are bloody expensive on amazon over here, double the price of a Topeak at the mo :o
-

You’ve made me order a topeak!I’m trying to be frugal here. ::)
-
@Don Pablo said:

You’ve made me order a topeak!I’m trying to be frugal here. ::)
Consider it an investment Pabs! You won't regret it.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




