The Gerber MP1 Thread
-
Shame to hear that the head has developed some play mate. :-\
-
I used a ball end peen (pictured)
The semi circle peen marks are a pin punch held up on edge so only part of the diameter is engaged.
Used a center punch to make a single punch in the lowest spot.
I can't twist them hard enough to get them to loosen up now.
Not pretty but effective.
The ball end peen is very effective at material displacement in the direction of force, but you could probably do it without one.
-
@Ravenroost said:
https://www.flickr.com/photos/158487066@N05/shares/XXe54EI used a ball end peen (pictured)
The semi circle peen marks are a pin punch held up on edge so only part of the diameter is engaged.
Used a center punch to make a single punch in the lowest spot.
I can't twist them hard enough to get them to loosen up now.
Not pretty but effective.
The ball end peen is very effective at material displacement in the direction of force, but you could probably do it without one.
Awesome. Thanks for the instructions!
-
Was thinking about getting one of these so wondered how they were holding up.
I like the idea of the "side cutter"pliers and the bit driver but not so sure on the spring action pliers!
I would appreciate any updates that would sway me one way or the other.......
Thanks.. -
@Jaypeebee said:
Was thinking about getting one of these so wondered how they were holding up.
I like the idea of the "side cutter"pliers and the bit driver but not so sure on the spring action pliers!
I would appreciate any updates that would sway me one way or the other.......
Thanks..While I do not use mine frequently, I did play around with mine and put them back on the shelf..
These are pretty my impressions rather than experience.
I am just going to talk mainly on the pliers, they seems rather "soft" to me. Twisting is def not something I would consider doing.. While the side cutters are a great idea, the sprung pliers pivot are built to a lesser tolerance. In long term use, I would think they will go misaligned faster than a cross over cutter. Making cutting a bit of challenge..
The rest of the tools are quite ok-ish.
-
Thanks Sam for the comments

I really need some heavy duty pliers so you might just have swayed me to the "nay" side :-\
-
@Jaypeebee said:
Thanks Sam for the comments
I really need some heavy duty pliers so you might just have swayed me to the "nay" side :-\
Hey but that my impression.. I didn't put it through much use. The earlier comments seems to praise it after using it. Someone with more hands on with it will have more input I am sure.
-
Then again, I am very biased against these type of anvil type cutters. I need mine to work with bare copper stranded wire. So they usually doesn't quite perform on this part.
Needs enlightenment. What's the different between a drop forged and cast pliers? Does it really makes so much of a difference?

-
Thanks again

Hopefully someone else will have some thoughts.......
-
@Jaypeebee said:
Was thinking about getting one of these so wondered how they were holding up.
I like the idea of the "side cutter"pliers and the bit driver but not so sure on the spring action pliers!
I would appreciate any updates that would sway me one way or the other.......
Thanks..Sorry I haven't kept up with thread. After my latest posts I shelved the MP1 and went back to my trusty LM300. The pivot play got to be too bad for the pliers to be effective for my uses. I intended on trying to peen the pivot but never got around to it. I actually packed up the MP1 last week and sent it back to Gerber under warranty.
I like a lot of things about this tool but I need pretty strong pliers for work and these didn't quite cut it. Whether they repair or replace my MP1 I'll likely trade or sell it. It'd be a great tool for someone not needing to do a ton of heavy twisting with the pliers. Or I may end up keeping it in my kitchen drawer for quick repairs around the house.
If you get one let us know how it works for you!

-
I have one of these and I love the G10 scales. I wish more multi tools would have them (or stag!) as I think it adds a good bit of grip to the tool. I am not surprised about the body flexing. When I look in the tool, it does not seem to have a steel liner, at least not one that is under all of the G10.. This weakens it and makes it good for light to medium duty use. I am surprised about the pliers durability though.
-
Thanks for the replies guys

I'm still undecided.......
-
Collection tool? Yes.
Tool to depend on? No.IMO of course.
-
@gerleatherberman said:
Collection tool? Yes.
Tool to depend on? No.IMO of course.
Nailed it!
UPDATE: Got an email from Gerber on the 5th saying my warranty had been processed and replacement should be arriving in 7-10 days. Pretty quick turn around.
-
I’m interested in the MRO variant, has anyone had a chance to try one of those?
-
Same basic frame, same pliers, and similar toolset; but MRO. I wouldn't expect it to be of any higher inherent quality and/or strength.
@clown said:
Nailed it!UPDATE: Got an email from Gerber on the 5th saying my warranty had been processed and replacement should be arriving in 7-10 days. Pretty quick turn around.

I sure hope the replacement has zero play in the pliers.
-
@gerleatherberman said:
Same basic frame, same pliers, and similar toolset; but MRO. I wouldn't expect it to be of any higher inherent quality and/or strength.@clown said:
Nailed it!
UPDATE: Got an email from Gerber on the 5th saying my warranty had been processed and replacement should be arriving in 7-10 days. Pretty quick turn around.

I sure hope the replacement has zero play in the pliers.
So, what apears to be a brand new in the box with sheath and all MP1 arrived on my door step this morning. Sure enough this one has plier play right outta the box. Needless to say I'm a bit pi$$ed about it.
Now, in all fairness, the play is minimal and likely wont affect the tools usefulness. But to return a tool for a specific problem and to get one back with the EXACT same problem is result of laziness and apathy, pure and simple. They must have just grabbed one off a shelf and threw it in a box and shipped it to me without even checking it. Thanks for the new MP1, Gerber.

-
Same basic frame, same pliers, and similar toolset; but MRO. I wouldn't expect it to be of any higher inherent quality and/or strength.
@clown said:
Nailed it!
UPDATE: Got an email from Gerber on the 5th saying my warranty had been processed and replacement should be arriving in 7-10 days. Pretty quick turn around.

I sure hope the replacement has zero play in the pliers.
So, what apears to be a brand new in the box with sheath and all MP1 arrived on my door step this morning. Sure enough this one has plier play right outta the box. Needless to say I'm a bit pi$$ed about it.
Now, in all fairness, the play is minimal and likely wont affect the tools usefulness. But to return a tool for a specific problem and to get one back with the EXACT same problem is result of laziness and apathy, pure and simple. They must have just grabbed one off a shelf and threw it in a box and shipped it to me without even checking it. Thanks for the new MP1, Gerber.

I too experience the same exact problem.. Diesel have a bit of machining problem on their cutter where they will leave a small gap between the cutter, making cutting soft cables impossible. I return a new one and they sent me back a nib with the same exact issue!!

-
I know the frustration. Last time for me was an OHT with highly misaligned pliers. New tool, pliers were almost as bad as the ones I sent in.

MT makers,
If I'm pissed enough to send a tool back for jacked up pliers, please check the one you are sending me to make sure it doesn't have the same problem.
/rant.Looks like time for a little peening. >:D
Worst case: they are too tight and need working in. :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
