The ol' Victorinox Spirit scissors mod - with pics
-
The Victorinox Spirit's scissors are often getting moaned about about their limited opening.
After around 2 month of using it I decided to fix that... as often described here and elsewhere.
However, I couldn't find a convenient enough explanation of how to "un-hook" the spring to get access to the nob to shorten it.I'd like to share that here now with my own pics.
Please excuse if this was posted before
Step 1. Carefully push something slim/flat between the scissors arm (I had to use a pin to start it off with) and the spring to lift up the spring, and turn the other half of the scissor until it's free.


Step 2. Carefully shorten the limiter nob thingy...


Step 3. With any luck it looks like this afterwards...

If you want to do this please be careful not to grind away too much.
I don't think it's bad if you do but I think it's not as nice to use if it would open too wide.Greets,
Matt
-
Great mod and tutorial!

Sent from my Redmi Note 5
-
Glad you like it, thanks FInixNOver :)
-
Now all you gotta do is to move the rivet down a bit to give a longer cut :o :D
-
Great mod Matt

-
Nice show and tell
. Thank you. -
Thanks guys

-
-
Nice walkthrough Matt
The Spirit scissors have always bugged me and it is part of the reason I don't carry mine ::) :D Thanks for taking the time to do this

-
I carried out this mod today. It improved the usability of my scissors tremendously. My scissors opening nearly doubled from 6mm to 11.5mm after the mod. Thank you so much Matt for sharing this great idea.



-
Nice one

-
Great job Roamingcat, glad you like it

-
@McStitchy said:
The Victorinox Spirit's scissors are often getting moaned about about their limited opening.
After around 2 month of using it I decided to fix that... as often described here and elsewhere.
However, I couldn't find a convenient enough explanation of how to "un-hook" the spring to get access to the nob to shorten it.I'd like to share that here now with my own pics.
Please excuse if this was posted before
Step 1. Carefully push something slim/flat between the scissors arm (I had to use a pin to start it off with) and the spring to lift up the spring, and turn the other half of the scissor until it's free.


Step 2. Carefully shorten the limiter nob thingy...


Step 3. With any luck it looks like this afterwards...

If you want to do this please be careful not to grind away too much.
I don't think it's bad if you do but I think it's not as nice to use if it would open too wide.Greets,
Matt
Awesome! Thank you kindly.

-
I wish I had the courage to do this mod. Sadly I'm a perfectionist lol. What tools did you all use?
-
I just did that mod last week. Used a dremel with one of the grinding wheels it came with, and a diamond file to smooth it after. It was pretty easy. Just make sure you mark what you want to take off, and go about it slowly. Good luck

-
This was an inspired but simple mod - Although much care needed to execute
And one when you think - "Why do I even need to do this?" ??? - ie Why aren't the Spirit scissors made like this in the first place

-
The bigger question is why did they even bother to redesign a sub-par scissor when they can use their time proven design..

-
@Sam Lim said:
The bigger question is why did they even bother to redesign a sub-par scissor when they can use their time proven design..Totally agree Sam.
I did the measurements as well some time go and figured that the 91mm scissors should just fit into the Spirit. But I hesitate to take it apart for that.Excellent mod

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login