Rebar Owner's Club (pic heavy)
-
I am sure one will come up

But for now I am broke
-
Cool pic Steve

-
-
Thanks fellas !

-
Used the Rebar's fabulous saw to trim the family Christmas tree!

-
Great use of the Rebar !

-
Great work BR

-
Thanks gents! -
-
. Thanks Poncho! -
Hey guys, can I join the Rebar Club please?
Some factory fit and finish issues I had to fix. More details in a post to follow, but you’ll spot the brass bushes in the locking tabs. Had fun fitting those tonight!
Tools now lock rock solid, so a worthwhile mod. I bet nobody can guess where I got 3mm bushes? RC car servo mounts...
First Leatherman stripdown and mod for me. I used aluminum coated copper cable terminators for pivot tools. Work well (quick and no damage).
Enough for tonight, so kicking back to enjoy the Rebar. It’s not perfect, but the club members know, with a bit of work, a great tool!
Cheers, Max



-
Welcome aboard and nice job!!

-
Can I join the Club?

Enviado desde mi HTC Desire 650 mediante Tapatalk
-
Glad to have you Campbell

-
Welcome to the club Max and CAMPBELL
Great pics both of you 
-
Also nice mod on the pins of the lock tabs, Max

-
@Poncho65 said:
Also nice mod on the pins of the lock tabs, Max
Thanks Poncho65.
I realized reading all the Rebar threads that the tool “wobble” was a common problem reported by users, so I took a closer look at the geometry of the locking system under a magnifier.
I could see that the culprit was play in the lock tab pin holes. It was easy to see that the pin could move forward and back in the hole, enough to allow the tool to rotate slightly on the pivot when locked open.
What’s nice about my ‘fix’ is that there’s no modification to the Rebar. The brass bushing is pressed into the hole from the inside (so it does not fall out), filed down almost completely so the lever can be re-installed without binding on the bushing. Then I simple ground down the remaining part of the tube to be flush with the handle.
All the tools now lock completely solidly, and still deploy smoothly with no issues. Just the casting of the lock recess of the Phillips is a little wide, so there’s still a tiny bit of play, but nothing like it was.
I suspect that LM leave some tolerance to allow for tolerance variations as there are 3 pieces of metal that must align perfectly to lock a tool.
The brass bushings I used are known as ferrules, used inside a rubber grommet to mount RC servos. Pic below.
So the challenge is to see if other Rebar owners are up to the challenge of this fix?
Kind regards, Max

-
I really don't have much wobble in mine
need to check them more closely though
it is a good idea to reduce tolerances
the bushings you used being a softer metal will also allow for enough play that they won't break if something is off with the lock pins 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

8)