Showcase: Mods to plier-based multitools
-
Cool. I'm going to have to do that, methinks :)
Charles.
-
Good job MMR

-
@Dutch_Tooler said:
Thanks hiraethus and BePrepared
An update on my Rebar VX:
Tool Name: Leatherman Rebar VX
Basis: Leatherman Rebar
Aim: rendering it more versatile (inspired by the ST 300 VX above) and also pimping it up visually
Mods: removed the lanyard ring, a washer, the fixed Phillips and the small flat screwdriver as well as the original file, and inserted a pair of scissors and a small and a large bit driver from a LM Wave in the handles as well as a ground down and drilled Wave diamond file. Also gave it BO handles. Still some minor adjustments planned to the awl (thinning) and the wide flat screwdriver (pry bar notch).
Links: /post/1577627 - note: tools reordered since I tooks the pics in the linked post; see pic below for current status.
Sent on my SM-G930F with Tapatalk
Latest pic, with Wave/Charge/Surge pocket clip added.

-
Many cool additions in here peeps

-
Tool Name: Sidekick +
Basis: Sidekick
Aim: Make it more versatile
Mods: Removed the Phillips and Flat head drivers. Added wave bit holder (purchased only the bit holder; no wave was armed in the process... at least not by my hands).The reason behind this mod was to make the mini tool box I carry in my backpack, a little lighter.
I forgot to take pictures of the before

At first try, just swapping the Phillips and Flat head with the Bit holder resulted in the pliers not fully closing.
It was necessary to bend the backspring a little bit, and also cutting a portion of the nail nick on the Bit holder. This created enough space for the plier head and fully close the tool.With this mod completed, I was able to remove some bulk, by swapping some tools (in the tool box), and removing the unnecessary ones.
Below you'll see the tool box before and after pics.








Sent from my Redmi Note 5
-
Excellent mod FlnixNOver

-
Thanks Wspeed!

Sent from my Redmi Note 5
-
Are you planning anymore mods FlnixNOver

-
Not for this particular tool...
But I have modded a Squirt PS4...
Maybe I should post that one here also...Sent from my Redmi Note 5
-
Yes that would be great

-
New blade exchanger.

-
Nice!
Sent fra min FRD-L09 via Tapatalk
-
Great work Darrell

-
wave + Rebar = near perfect internal tools.
got that mod done so fast I felt like doing one of the others on my list to the Spirit X
-
Just added an s30V blade to my wave, nearly complete overhaul for my wave.
-
Nice work HG

-
Final mod for a while, documented it and will make a new thread soon. Added the Rebar Philips by removing the small metal tab inside the frame. There is not a little more of a gap between the frame pieces when it is closed but not really noticeable.
Cheers
-
Tool Name: TSA Safe Squirt with a Blade
Basis: Leatherman Squirt PS4
Aim: Have a versatile pocket/key chain tool that I can get on an airplane without TSA taking it to sell on ebay. Specifically being able to have a blade that is easily removable/detachable
Mods:
Biggest mod was to replace the standard blade with a scalpel holder. Needed to file down the scales to accommodate this, however, it creates a nice notch that the outside of the blade holder can sit in.I also added a pair of tweezer by filing down the opposite scale at an angle similar to the tweezer holders on the Style. I also filed the inside of this scale down maybe a 32th of an inch to make it lie flat with the wider scissors that are also stored here.
The back is going to have house keys on it (just need to get them cut), will replace my Style which was previously my EDC.




-
@Trebor Redins said:
Tool Name: TSA Safe Squirt with a Blade
Basis: Leatherman Squirt PS4
Aim: Have a versatile pocket/key chain tool that I can get on an airplane without TSA taking it to sell on ebay. Specifically being able to have a blade that is easily removable/detachable
Mods:
Biggest mod was to replace the standard blade with a scalpel holder. Needed to file down the scales to accommodate this, however, it creates a nice notch that the outside of the blade holder can sit in.I also added a pair of tweezer by filing down the opposite scale at an angle similar to the tweezer holders on the Style. I also filed the inside of this scale down maybe a 32th of an inch to make it lie flat with the wider scissors that are also stored here.
The back is going to have house keys on it (just need to get them cut), will replace my Style which was previously my EDC.
That mod is completely amazing! Where did you get the Scalpel holder? I'd love to get more info on how you did this...did the tool have screw pivots to begin with or did you add them?
-
Here is my current EDC multi-tool:
Knifeless Rebar
Info on the mod can be seen in the mod forum.
Cheers,
H.G.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login