Capability-to-Size ratio
-
-
Ooooh... you'd have to ask her. I would think I'd get good scores in both Durability and Ease of Use :)
-
Okay, back on topic:
I agree that the Vic Spirit is among the best (if not THE best) at cramming a lot of features into a small package. But are there any others that really stand out?
How about the Leatherman Micra?
-
Definitely,the Micra is up there, so is the Juice KF4,and XE6,at the low end of the scale,I'd have to put the Gerber Auto Recoil,probably the Nautilus too.
-
@J-sews said:
Okay, back on topic:I agree that the Vic Spirit is among the best (if not THE best) at cramming a lot of features into a small package. But are there any others that really stand out?
How about the Leatherman Micra?
I made an attempt to quantify "capability-to-size" ratio.
Here's tools per gram:

and here's grams per tool:

From these comparisons, I'd say that the Victorinox Rambler has the highest "capability-to-size" ratio and the Leatherman PST and Victorinox SwissTool Spirit are tied.
Here are the numbers that I used:

And here's a list of the implements that I included in the tool count:
Victorinox Rambler
Small blade
Scissors
Nail file
Screwdriver
Bottle opener
Magnetic Phillips screwdriver
Wire stripper
Toothpick
Tweezers
Key ringLeatherman PST
Needlenose Pliers
Regular Pliers
Wire Cutters
Hard-Wire Cutters
Clip-Point Knife
Metal File
Wood File
8 in. / 20 cm Ruler
Can Opener
Bottle Opener
Small Screwdriver
Medium Screwdriver
Large Screwdriver
Phillips Screwdriver
Awl PunchVictorinox SwissTool Spirit
Needle nose pliers
Screwdriver (2 mm)
Screwdriver (3 mm)
Wire cutter(for wire up to a hardness of 40 hrc)
Bottle opener
Screwdriver (6 mm)
Crate opener
Combi-edge blade
Scissors
Metal file
Metal saw
Wood saw
Reamer
Phillips screwdriver
Chisel/scraper
Isolation length cutter
Wire bender
Wire stripper
Wire scraper/round cutter
Can opener
Multi-purpose hook
Hard wire cutterAfter I made the graphs I noticed that Leatherman lists two types of pliers for the PST and Victorinox lists one type of pliers for the SwissTool Spirit. I should have compensated for the difference but was too lazy to redo the images of the graphs. Even dropping one tool on the PST results in numbers that tie the SwissTool Spirit (see image below):

-
I don't know how it would work out in your calculations,but for a few grams more,with the PST II.you get scissors.
-
-
@Bison56 said:
I don't know how it would work out in your calculations,but for a few grams more,with the PST II.you get scissors.I also thought it would change things but according to Leatherman they are the same weight and (if I added correctly) have the same number of tools:
Needlenose Pliers
Regular Pliers
Wire Cutters
Hard-Wire Cutters
Straight / Serrated Knife
Diamond-Coated File
Cross-Cut File
8 in. / 20 cm Ruler
Can Opener
Bottle Opener
Extra Small Screwdriver
Medium Screwdriver
Large Screwdriver
Phillips Screwdriver
ScissorsHere's a new graph of tools per gram with additional multi-tools and an adjusted number of tools for the PST:

-
Hmm, excellent work Supratentorial. Clearly there is more to this than it first appears. One factor I see weighing heavily on your charts is inherent to the plier tools. The plier head itself must be strong, therefore it alone makes up a large percentage of the weight of those tools. A SAK or even a tool like the Micra with a lighter weight scissor head will compare favorably.
-
I wonder how the Wenger Rangers compare...For the sake of multi-tool science, please have felinevet send me one of those Wenger Rangers (with pliers) so that I can collect more data! :P
-
@J-sews said:
Hmm, excellent work Supratentorial. Clearly there is more to this than it first appears. One factor I see weighing heavily on your charts is inherent to the plier tools. The plier head itself must be strong, therefore it alone makes up a large percentage of the weight of those tools. A SAK or even a tool like the Micra with a lighter weight scissor head will compare favorably.Tools per volume would be another means of calculating "capability-to-size" ratio but you run into a similar problem: The pliers takes up more volume than a scissor head, etc... Also, I didn't readily have access to the volume of each tool. :-\ The only way to avoid this problem is to compare each type of tool to similar tools (e.g. Rambler to Micra, or PST to SwissTool). But overall, the small Swiss Army knives have an impressive "capability-to-size" ratio.
-
The volume measurement may be a more appropriate measurement if (for instance) you are comparing a multi-tool made out of plastic or thin steel to a SwissTool. ...of course, a thicker steel will also increase volume.

Since I wasn't up for calculating volume by water displacement... :P I did some rough measurements which included the lock releases on the SwissTool Spirit and the pins on the PST.
It's late and I'm half asleep so I may have messed up in my calculations but it's about 4% in favor of the SwissTool by weight and about 4% in favor of the PST by volume.
-
A better, and maybe more pragmatic way to do this is to actually look at each implement, and give it a point score depending on how useful it is in general and on average (you may get this info by looking at the thread made a long while back about which tools people use most on their multitools). Of course this will not be true for everyone, but it will give you a general set of rules to work with.
Then you can count the tools on a multitool (maybe deducting a half point, or adding it on for an implement if it is especially well designed or badly designed) and compare that to BOTH weight and dimensions of the tool.
The reason why I say both is because it is possible to have two really big tools, but one is much lighter than the other, or to have two tools of similar weight, but for one to be much larger than the other.
I think if you could do something like this, it would give you quite good info.
-
@Raukodur said:
A better, and maybe more pragmatic way to do this is to actually look at each implement, and give it a point score depending on how useful it is in general and on average ....Of course this will not be true for everyoneI think you hit the nail on the head--the problem with assigning a score to each tool based on usefulness is that the usefulness of each tool will be different for different people. This isn't an exact science but the numbers give some indication that the SwissTool Spirit doesn't just blow other multi-tools out of the water. Using a point system like you suggest would lower the "capability-to-size" ratio of the SwissTool Spirit for me. I see most of the tools on the Leatherman PST II as "essential" but never use many of tools on the SwissTool Spirit (e.g. metal saw, wood saw, Isolation length cutter, Wire bender, Wire scraper/round cutter, Multi-purpose hook).
-
@supratentorial said:
.....the problem with assigning a score to each tool based on usefulness is that the usefulness of each tool will be different for different people. This isn't an exact science but the numbers give some indication that the SwissTool Spirit doesn't just blow other multi-tools out of the water. Using a point system like you suggest would lower the "capability-to-size" ratio of the SwissTool Spirit for me. I see most of the tools on the Leatherman PST II as "essential" but never use many of tools on the SwissTool Spirit (e.g. metal saw, wood saw, Isolation length cutter, Wire bender, Wire scraper/round cutter, Multi-purpose hook).I agree with that logic.
For example, I suspect a lot of people ONLY ever use the pliers, a knife, and a screwdriver on their multitool. For such an individual, the ideal tool would be the smallest package that includes those three features.In other words, for many folks, the Leatherman Freestyle might just have the highest capability-to-size ratio possible.
-
What I am suggesting would show that to be the case, since those tools you mentioned would have the highest scores, so the multitools which incorporate them, and do it well would score higher than those that don't or do so badly. This would be in relation to the size and weight of the tools, so a small light tool which incorporated the minimals well would score highest, as it should. Combination tools would obviously be a great benefit, since you get the positive score for both tools (maybe minus a half point each since they lose some funcionality be being combined) but lose hardly anything in terms of increased weight and size of multitool. Tools which are used less often would have lower scores, and so it would be a trade-off between the added points of incorporating the tool, to the added weight and size of the multitool for having incorporated the tool. For most tools I would guess that they still add something positive overall, but for some very rarely used implements there might actually be a negative overall score for having incorporated them.
Of course, this is easier said than done, but I do believe that if some time is spent, a rather general framework can be built to 'score' the different tools found on multitools.
-
@J-sews said:
...For such an individual, the ideal tool would be the smallest package that includes those three features.In other words, for many folks, the Leatherman Freestyle might just have the highest capability-to-size ratio possible.
It may...esp if we consider bit drivers as providing higher capability. Spoonrobot raised some important points earlier:
@Spoonrobot said:
...Does the bit holder on current Leatherman models improve capability significantly or does it have the opposite effect since it reduces the overall amount of tools? Is there an overall standard or does it vary by person-to-person... -
@Raukodur said:
...Of course, this is easier said than done, but I do believe that if some time is spent, a rather general framework can be built to 'score' the different tools found on multitools.You're welcome to try it. There may be a point of diminishing returns but calculating volume by water displacement would also give better results. I'd be interested in seeing what you come up with. In case they are helpful for your calculations, here are the weights and volumes I used:

-
I don't know how it would work out in your calculations,but for a few grams more,with the PST II.you get scissors.
(I don't know how it works out in YOUR calculations either, but if that's a picture of you in your new avatar, I think you have more serious issues to worry about!) :P
Not to worry ! It's only my yardwork attire,never know when the urge to tiptoe through the tulips will strike.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
