What's this?
-
What, if it's got a swiss cross on it, you just suck it up like a vacuum? Even if you don't know what it is? :D
Heh-heh, I don't know what it is either Neil. One thought though is that flathead screwdrivers for firearms are usually hollow ground. Yours doesn't appear to be.
Don't know if that means anything though. :-\
-
@J-sews said:
What, if it's got a swiss cross on it, you just suck it up like a vacuum? Even if you don't know what it is? :DHeh-heh, I don't know what it is either Neil. One thought though is that flathead screwdrivers for firearms are usually hollow ground. Yours doesn't appear to be.
Don't know if that means anything though. :-\
Something like that :D
OK, I'm not that bad but curiosity got the better of me. The sheild design is the same as on this erinox SAK. Another tool I don't know the origins of.
Neil
-
I like how you need a second screwdriver to change the ends around. What a well thought out and cunning design. ::) ;)
-
Isn't it a chisel?
I mean, the handle shape, the proportions, all points in that direction to me.
-
I know what your saying but its not sharp like a chisel.
Gareth, the screw that holds it in place is a knurled knob and can be turned by hand. You cynic :P
Neil
-
-
About the shield shape.
don't hate me:
I've also found images with an "I" inside a very similar mark... true leather.
Maybe a tool for some leather work?
-
A coworker saw the tool, and said that around '50 and '60, there were similar screwdrivers given with Singer sewing machines to fix and tweak them.
Hope to be useful -
@WH867 said:
If you want another one :).
http://cgi.ebay.com/Swiss-Army-Schmidt-Rubin-K11-K31-K-11-K-31-Screw-Driver_W0QQitemZ160322421895QQihZ006QQcategoryZ36077QQssPageNameZWDVWQQrdZ1QQcmdZViewItemThe above auction mentions it. To fit the K11 and K31 Carbines. As seen here. http://s219.photobucket.com/albums/cc306/lr380/Schmidt Rubin K11 carbine/
and here about half way down: http://www.swissrifles.com/sr/
Well done Dennis.
-
I am now much enlightened, thanks gents. Anyone want to swap it for a SAK :D
Neil
-
@sardauker said:
A coworker saw the tool, and said that around '50 and '60, there were similar screwdrivers given with Singer sewing machines to fix and tweak them.
Hope to be usefulYour right and I actually have one of those around here somewhere.
-
What, if it's got a swiss cross on it, you just suck it up like a vacuum? Even if you don't know what it is? :D
Heh-heh, I don't know what it is either Neil. One thought though is that flathead screwdrivers for firearms are usually hollow ground. Yours doesn't appear to be.
Don't know if that means anything though. :-\
Something like that :D
OK, I'm not that bad but curiosity got the better of me. The sheild design is the same as on this erinox SAK. Another tool I don't know the origins of.
Neil
Heres some info on Erinox
"It is definitively not a Victorinox and not a Wenger product. But in the past there were different cutleries in Switzerland producing there own knives. This model is very similar to our Swiss Army standard knife and can be made by one of these cutlerers. We think it is made in Switzerland and no fake. But unfortunately we cannot tell you from which company it was made.
Best regards
Urs Wyss"
I sent an Email to Vic asking about it.
-
Seems a bit cheeky asking Vic about something that clearly wasn't anything to do with them. I'm actually surprised you got a response.
-
Who else could I ask? They own all the SAK companies in Switzerland.
-
Seems on the same level as asking Leatherman about a Gerber Clutch to me.
I'm just surprised they replied that's all and it was damn decent of them to do so.

-
@Benner said:
Seems a bit cheeky asking Vic about something that clearly wasn't anything to do with them.I would say that 99% of people (in general not on this site) would have said that it was made by Victorinox (or "those Swiss Army Blokes") It's SAK shape, has a shield and cross on it to me that would say Victorinox, it even says Switzerland on the blade. So IMO it is not clear that it isn't made by them, the only thing that might give it away is the Erinox but i'm sure not every SAK says Victorinox on it isn't there Wengerinox or something on some of them?
Vic would have been my first port of call to find out something about it too :) -
Seems a bit cheeky asking Vic about something that clearly wasn't anything to do with them.
I would say that 99% of people (in general not on this site) would have said that it was made by Victorinox (or "those Swiss Army Blokes") It's SAK shape, has a shield and cross on it to me that would say Victorinox, it even says Switzerland on the blade. So IMO it is not clear that it isn't made by them, the only thing that might give it away is the Erinox but i'm sure not every SAK says Victorinox on it isn't there Wengerinox or something on some of them?
Vic would have been my first port of call to find out something about it too :)Perhaps I am in the minority then, but I knew that wasn't made by Vic as it had none of the stampings to say so.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



