What fixed blade are you carrying today?
-

Although I do like to be able to baton a knife to process wood. And axe is a better choice, but I don't carry an axe much. And I agree that the absolute *need *to baton is probably overrated. Still, if the available wood is snow covered or wet, it is very nice to be able to split open some wood to get to dry-stuff when making a fire. Here, the pines grow up in the wind and twist, makes this wood a pain to spit cleanly. And it is very knotty. But, again, I've found that judicious use of a knife with reasonable sized wood isn't a problem for most knives.
I've used that 1/8" Koyote to baton reasonably sized wood without a problem.
I have a BK-2. I'm not a fan. It's too chunky, and I think that chunky quality reduces it's overall utility. And it just plain weighs too much. I often think of getting rid of it......but it makes for a nice "sharp pry-bar". It does take a hair-shaving edge as well.
The handle on the BK-2 (same as the BK-7, 5, and 9) is pretty comfortable for me, although I prefer the micarta scales. The plastic scales feel too slippery to me.
-
well you never know when you'll need to baton a really nasty piece of wood so having that BK-2 handy is a smart move. plus batoning might be safer. a lot of people aren't that used to an axe, being tired, cold, might be later in the day are all factors to consider. plus axes are heavy as well.
even without an axe, in my head there is some choice to be made. now this comes from 0 practical experience and is pure theory, so it should be taken with a grain of salt. if you had access to enough wood that is properly sized to baton it and there is a realistic need for doing so (like the wood being wet), wouldn't it make more sense to baton the straighter pieces with fewer knots and leave the gnarly pieces to just burn as larger fuel?
here we've never needed an abundance of small pieces, just enough to get the fire going enough to accept the larger fuel. that usually meant having 3 or 4 forearm sized pieces busted to thirds or quarters and 1 or 2 pieces to smaller chunks, so the theory above might make sense or i might be talking out of my smurf
-
In my experience, once the fire gets going, you don't really need to baton. Just put wood on the fire, although, split woods catches fire and burns more easily.
Batonning for me has been most helpful when trying to get a fire started by exposing inner, dry wood that can be shaved into tinder and kindling. If you have enough dry tinder and kindling available, you don't even need to baton. Sometimes the 'feather stick' method is perfect, although, here in the mountain west, straight grained wood that is easy to turn into a bundle of perfect curls isn't easy to come by.
A few weeks ago I was staying at Forrest Service cabin. There was some cut firewood available, but no kindling. And the ground was covered in 6"-36" of snow. I used a big "Canadian Camp Knife" to baton actual logs into kindling. Then broke some kindling down into fine pieces of wood to use as tinder. Worked perfectly and, even slightly frozen, I got a good blaze going in a matter of minutes.
My hunting buddy had not seen this technique. He wasn't sure e could have gotten a fire going. He was impressed enough by the technique that he bought himself a big camp knife after we got back.

-
BRKT Canadian camp knife? that is a thing of beauty. But that is also a larger knife that really should be able to handle such use. You ever tried Fallkniven knives? I'm curious what you think of their performance and handles since your enviroment is not really forgiving and you've got big hands
-
Stand by.....
-
I really like everything I know about Fallkniven.
After a bit of research and consideration, I got this S1:

OK, so it looks a bit funny.......
While I love the Fallkniven S1, I tend to not carry it. The handle is a bit small for me. So....I added some camo grip tape. This made a big difference for the way the knife feels. But I'm not sure it's a durable solution for me. (I could make it durable by soaking it in superglue, but that is a one-way ticket.) Since adding the grip tape, I have only used the S1 for relatively light tasks.
Still, the handle feels better to me.
The sheath is some kind of plastic. It is well designed and very sensible....but I found it could be noisy. Like loud noisy. So I added a bit of tape to the sheath. This seems to help, but then I stopped carrying the knife. I took it on some motorcycle camping trips, but never really used it.
Aside from the edge being a bit polished, it looks nearly new:

So here's a funny thing. I've got a knife I really like, but one that doesn't really suit me. A knife that gets left at home more often than it gets to go out on the road. For a while I thought it might serve as an emergency kit knife.....but it doesn't even do that.
** sheesh!* * Just checked the edge and it's sharp! Hair cutting sharp!
I'm at a loss as to an opinion about this knife. One the one hand, I think it is the best thing since Excalibur, on the other hand.....it doesn't really suit me.
If you want to give it a tryout, Styx, I'll send it over to you. It ain't doing much here.

-
That sounds a lot like me and the Spyderco Sage I mentioned earlier. Funny thing I've actually carried that knife a good bit but anytime I thought there would be more than a quick cut it got switched out for a SAK. Still managed to put a few unappealing scratches on it while sharpening

Thanks for the offer, I might take you up on it one day. The handle of the S1 being small is concerning though. You were spot on with the Para2 so wouldn't surprise me if I got to the same conclusion
-
Well, the offer stands. Give it some thought. There is a lot to like about the S1. Cheers,

-
Styx, cleaned it up for ya.
There is a bit of a rattle now, when the sheathed knife is shaken.
I think I would consider making a leather sheath for it. Or....glue a bit of bicycle inner tube inside the sheath. I've done that with other knives and it has worked out well.


-
Excellent little hammer pommel on the S1. Sharp enough to be used as a ferro rod striker.

-
well you're efficient.
I remember reading that the sheath was designed to be a looser fit to prevent freezing in the sheath, especially if the blade was put it wet
-
This is a Buck 116 Caper.These knives were discontinued many years ago.They are much sought by collectors.My brother and I have committed a mortal sin,by collectors standards, by modifying this knife.
The first picture shows the side view.You can see some of the modifications we created with this knife.The most dramatic modification is noticeable with the second photo,illustrating the slimness of the handle in its new configuration.
In its current configuration it makes for very small and compact carry knife The blade is only 3 1/4" and even to the uninitiated,it almost looks like a toy.
-
@toolguy said:
This is a Buck 116 Caper.These knives were discontinued many years ago.They are much sought by collectors.My brother and I have committed a mortal sin,by collectors standards, by modifying this knife.The first picture shows the side view.You can see some of the modifications we created with this knife.The most dramatic modification is noticeable with the second photo,illustrating the slimness of the handle in its new configuration.
In its current configuration it makes for very small and compact carry knife The blade is only 3 1/4" and even to the uninitiated,it almost looks like a toy.
Good mod TG!

-
**I didn't carry-it today, but gave-it some TLC. My classic, Al Mar 'Special Forces' model. **


-
Such a cool knife......

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login