kamakiri's Former Lurker / New Member Intro (long read)
-
Welcome to MTO kamakiri

That's a great into ... lovely work and collection
-
That is a great introduction!

And welcome to this wonderful place
Sent fra min FRD-L09 via Tapatalk
-
Welcome to
great intro thread

-
Awesome read

And welcome to

-
Welcome.
Is that a double magnifier / in-line phillips mod? -
Thanks for the warm welcome
! 
I checked how long I was signed up...
Date Registered: February 21, 2018, 11:55:34 PM

Didn't think it was that long lurking!
Happy New Year
!@smiller43147 said:
Welcome.
Is that a double magnifier / in-line phillips mod?Yes, it is!
-
As do I! Welcome aboard!
@FolderBeholder said:
Welcome to
I like your style!
-
Oh boy, you’re going to fit in here alright! Welcome! Glad to see another Hoffritz fan.
-
Welcome to
Sir kamakiri 
What an awesome introduction. That’s an impressive collection of SAKs you have there... I especially like the part where you recreated the bail... Awesome restoration...

-
Great start! Welcome!

-
@jaya_man said:
Welcome to
Sir kamakiri 
What an awesome introduction. That’s an impressive collection of SAKs you have there... I especially like the part where you recreated the bail... Awesome restoration...

Welcome to MTO!
Awesome 1st post, and I agree with Jaya man, I like that bail restoration.
I'd be interested in more details on how you did it.
-

Welcome home.

-
Welcome to
Sir kamakiri 
What an awesome introduction. That’s an impressive collection of SAKs you have there... I especially like the part where you recreated the bail... Awesome restoration...

Welcome to MTO!
Awesome 1st post, and I agree with Jaya man, I like that bail restoration.
I'd be interested in more details on how you did it.
Thanks! I'll try my best to explain.
The project started with the thought, "How would I make a bail/shackle for a custom resto-mod that's the width of a SwissChamp..."
The hardest part was the math...estimating the length needed on-center eye to eye for the correct look installed. A paper or card stock template to mock-up helped.
Once that was figured, estimating how to control finish length through the various forming steps was next.I started with a 3/32 wire and it didn't seem like enough material to achieve the workable width and thickness after flattening a couple of ends. So I started with 2.5mm and decided to deal with the material removal needed on the center section instead of hammering which would change the length.
The shaping of the ends turned out to be the relatively easy part.
Flatten and form one end to have enough width and thickness for the final eyelet. Excess was left on the end to handle with pliers.
File details. Sure, that sounds easy, but NS is pretty soft and I only used 3 jewelers files. A half round taper, a small diameter round and a flat.

Half round did most of the work at the 'neck' and around the eyelet and the flat did the visible 'step' and the back details/step. Small round to work the drilled eyelet final size and bevel.
Drilling the eyelet:

Open/locate hole with round file:

clip excess and taper eyelet:

Shape and reduce outer edge to match:

Work the other end and control the eye to eye length:

Finish the center section to match and bend to final shape before installation.
Hope that helps!
-
Welcome. Terrific first post and wonderful collection. Looking forward to more posts and pictures.

-
Question is, what took you soo long kamakiri?

Just kidding... awesome detailed explanation on the bail mod...

Can we ask you to make a separate thread on the bail reproduction and modded SAK in the Mod Squad section?

-
@kamakiri said:
Thanks for the warm welcome
! 
I checked how long I was signed up...
Date Registered: February 21, 2018, 11:55:34 PM

Didn't think it was that long lurking!
Happy New Year
!@smiller43147 said:
Welcome.
Is that a double magnifier / in-line phillips mod?Yes, it is!
So it's a pocket telescope then :D
-
@kamakiri said:
......... Thanks, really, <u>to all</u> for the kind welcome! I'm feeling even guiltier for lurking so long. :'( .......**Why ? ** ???
There is no oblligation to post! ;)
Although we are happy that you have chosen to now
It looks like you have a lot to share and will fit in v well :DAnd thanks for that great intro Sir Kamakiri.
I love Hoffritzes too - I never knew about the two versions of the stamp - Although I did know about the switch from inlay to hot stamp
Off to check my Hoffritzes now !And BTW - I think most of us lurked for a while before
Welcome :D
-
Hello!

My introduction post seems so... lame... now... :D
-
Hello there and... Welcome!

Is it just me or do all your spare parts look like they have little pixie faces?




Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login