Measuring Tools
-
Lufkin 372 (36 1/2) 12" caliper rule. Divded into eights, tenths, twelfths, and sixteenths of an inch, this is one handy measuring tool for precise work. I think it dates to the 1930s, possibly even the 1920s. Most I've seen are painted yellow, this is bare boxwood.

Lufkin 966 "Red End" six-foot folding rule. Not that old, but is still USA made, so definitely predates the Apex buyout and outsourcing of the brand to Mexico. These were new-old-stock at a local farm supply store. Definitely worth the $15 they ask. They still have a few if anyone wants one.
-
Nice!!

-
Does the left end of that top scale slide out like a caliper?
That Red End is the type of wood folding rule that I'm used to seeing. -
@smiller43147 said:
Does the left end of that top scale slide out like a caliper?
That Red End is the type of wood folding rule that I'm used to seeing.It does. Forgot to upload that photo. That was actually the whole reason behind me getting it. I saw that a hairdresser my grandmother goes to had one just like it (though newer, as it was yellow), but wasn't interested in selling it, so I got this one.
-
Nice Lufkins, Cody! I have a caliper folding rule, but its' condition isn't nearly as good as yours. Still useful though. :)
Here are some size/distance measuring tools. I left out the more common(or less interesting) stuff like regular ing and such.



-
Great measuring devices guys
I have several rulers as we bricklayers still use them quite often
I have some older ones as well 
-
Love those folding rulers with the calipers. Lufkin used to make some really good measuring instrument some time ago, or so I was told. Gerleatherberman, that hand vise is such a cute little thing! I've been meaning to get of those!
edit: forgot to attach the picture :P
WantNEED to get a die maker's square and a double square, and a combination square, and...
-
Nice selection of measures, WWW!

I really like the hand vise as well. It makes a good thickness comparison tool as well. :)
-
I thought I'd show a few more specialized ones for machining.
First off a machine level. The precision is far higher than a normal carpenters level. This one is 0,02mm per meter. (In practice one often has to use a normal level first just to get within shooting range of the measureable range).
Then there is a tool setting sensor. It is used to measure the length of machine tools. Important for instance when lowering as the recorded length lets the machine know when it can expect the tool to touch the workpiece. (Mistakes here tends to either make for lots of cutting air or very loud and expensive bangs). Precision down to about 0,002 mm or so.
And the last one here is a 3D touch probe. It gives a very precise measurement of tip movements either upwards or from any side. Used to locate workpieces and features, as well as placing jigs, machine vises or other clamping or reference equipment. Precison about 0.01mm in any direction.



-
@Vidar said:
I thought I'd show a few more specialized ones for machining.First off a machine level. The precision is far higher than a normal carpenters level. This one is 0,02mm per meter. (In practice one often has to use a normal level first just to get within shooting range of the measureable range).
Then there is a tool setting sensor. It is used to measure the length of machine tools. Important for instance when lowering as the recorded length lets the machine know when it can expect the tool to touch the workpiece. (Mistakes here tends to either make for lots of cutting air or very loud and expensive bangs). Precision down to about 0,002 mm or so.
And the last one here is a 3D touch probe. It gives a very precise measurement of tip movements either upwards or from any side. Used to locate workpieces and features, as well as placing jigs, machine vises or other clamping or reference equipment. Precison about 0.01mm in any direction.
More please!! -
Some more then.
I guess these qualify as hand tools a bit more than the first ones.First off a pair of digital dial indicators. (Some tasks need more than one). These are combined with various kind of holders to bring them into position, and will then register changes in one direction. Precison somewhere around 0,001mm. They can hold onto minimum or maximum values, and be connected to a computer for those so inclined. (I've never tried or had any use for that).
Being digital they give very precise readings, but sometimes change in itself is more interesting than actually how much the change is. For those situations I prefer the analog style dial indicators. These digital ones do simulate an analog scale too, but something about a dial needle moving is just very straight forward.
Next is an old depth micrometer set. Basically for measuring depth of holes or grooves or similar to a precision of about 0,01mm.
Then there is an internal micrometer set. It expands so one can measure internal distances of stuff. Precision as above.
Last I included two niche ones. Those are screw in hole transfer sets. They are utterly useless 99,99% percent of the time, but when you do need them you really do need them. Say you have some metal part that need to be replaced. Some bush fix back when it was mounted mean that there are no drawings or information about the pattern of the mounting holes. All you got is the threaded holes which the part will be screwed onto later.
Then these are gold - you screw them into the mounting holes, put whatever you'll mount over, and give it some decent hammer action. The hardened tips then make some nice dents where you need to make the mounting holes on the new part. I guess they are not measuring devices as such, but they do away with the need for measuring altogether. That way the lack of documention can be passed on to the next poor smurf to come along next time. >:D





-
Ahhh, two other inside face stick rulers! But there both two ways, mines only an inside face, I hate outside face. I got a few diff measuring tools but I can’t get pics now..
JR -
More please!!Some more then.
I guess these qualify as hand tools a bit more than the first ones.First off a pair of digital dial indicators. (Some tasks need more than one). These are combined with various kind of holders to bring them into position, and will then register changes in one direction. Precison somewhere around 0,001mm. They can hold onto minimum or maximum values, and be connected to a computer for those so inclined. (I've never tried or had any use for that).
Being digital they give very precise readings, but sometimes change in itself is more interesting than actually how much the change is. For those situations I prefer the analog style dial indicators. These digital ones do simulate an analog scale too, but something about a dial needle moving is just very straight forward.
Next is an old depth micrometer set. Basically for measuring depth of holes or grooves or similar to a precision of about 0,01mm.
Then there is an internal micrometer set. It expands so one can measure internal distances of stuff. Precision as above.
Last I included two niche ones. Those are screw in hole transfer sets. They are utterly useless 99,99% percent of the time, but when you do need them you really do need them. Say you have some metal part that need to be replaced. Some bush fix back when it was mounted mean that there are no drawings or information about the pattern of the mounting holes. All you got is the threaded holes which the part will be screwed onto later.
Then these are gold - you screw them into the mounting holes, put whatever you'll mount over, and give it some decent hammer action. The hardened tips then make some nice dents where you need to make the mounting holes on the new part. I guess they are not measuring devices as such, but they do away with the need for measuring altogether. That way the lack of documention can be passed on to the next poor smurf to come along next time. >:D

Need to get some tranfer punches. Super usefull, in university we had to machine a little bottle hydraulic jack. I wish I had some tranfer puches to locate some of the holes, they turned out so far off that we had to enlarge some of them in order to make it work. Thanks for the pics, they are (both tools and the photography) really nice!!!
-
That's some sweet kit, Vidar!

-
I figure the photo measuring stuff is relevant enough for this thread? Usually when I take photos I just correct for white balance and nudge the in-camera exposure a bit if it is off - that works fine for almost everything. But for those rare occasions when it isn't I have two measurement helpers to take technically proper photos.
One is a light meter. Instead of me or the camera trying to estimate how much light hits a certain place this removes the guesswork - place the thing where you need a correct exposure and it will measure the actual light there and give the correct setting to you. (In the off case anyone from Sekonic would ever read this: That power button is very badly placed, and the pouch doesn't protect it either. So more times than not it has kept turning on during storage or carry and shows up powerless when needed. I've now resorted to removing the battery when not in use).
The other is a color and white balance reference card. If you take a photo of that facing the camera under the same light as you'll use later it will give you a handy reference for white balance and color corrections. One can usually clearly see the difference when one compare before and after such corrections.

-
Back to some more tool like measurement devices. The first one can be used for 90 and 45 degrees angles, but its main purpose is as a center finder at the end of round cylinders or the like. The inside 90 degree is pushed up against the cylinder face and one draws a line along the straight bit. Then the cylinder or tool is turned somewhat, the operation repeated, and the cylinder center is where the lines cross.
The last photo is of variations of combined length measure and marking from an edge. Great for making parallell lines or marks a given distance from straight or outside curved edges, or in the bottom case also inside curves edges.



-
@gerleatherberman said:
That's some sweet kit, Vidar!
You have some really nice stuff yourself up there in the thread I see!

-
From 6” to 100’ Theres 11, 12 if you count the workstation mat which has come in handy at times, I used that scale ruler throughout 7yrs in schools, I had a aluminum one but it disappeared, you can see it’s little baby brother underneath it, that faxmax and stick ruler have seen the most field time, but for the last 10yrs the only ones that have been used are those rulers or that dinky plain 12ft tape measure..
JR
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


