Measuring Tools
-
From 6” to 100’ Theres 11, 12 if you count the workstation mat which has come in handy at times, I used that scale ruler throughout 7yrs in schools, I had a aluminum one but it disappeared, you can see it’s little baby brother underneath it, that faxmax and stick ruler have seen the most field time, but for the last 10yrs the only ones that have been used are those rulers or that dinky plain 12ft tape measure..
JR
-
@MadPlumbarian said:
From 6” to 100’ Theres 11, 12 if you count the workstation mat which has come in handy at times, I used that scale ruler throughout 7yrs in schools, I had a aluminum one but it disappeared, you can see it’s little baby brother underneath it, that faxmax and stick ruler have seen the most field time, but for the last 10yrs the only ones that have been used are those rulers or that dinky plain 12ft tape measure..
JRCool! That setup will take care of most measuring scenarios.

-
From 6” to 100’ Theres 11, 12 if you count the workstation mat which has come in handy at times, I used that scale ruler throughout 7yrs in schools, I had a aluminum one but it disappeared, you can see it’s little baby brother underneath it, that faxmax and stick ruler have seen the most field time, but for the last 10yrs the only ones that have been used are those rulers or that dinky plain 12ft tape measure..
JRCool! That setup will take care of most measuring scenarios.

I would think so, I didn’t put my sewing tape measure, I wish that micrometer wasn’t digital of course there’s always the adjustable wrench,

I also had a little metal pocket one with a clip, but I’ve lost so much, let’s not forget everyone’s scale on the sak!
I like that little hobby one you posted in the pocket dump!
JR -
@gerleatherberman said:
A lot of my gear is old-school. It doesn't quite measure up to your precision kit. :DOld-school still in use tend to work very well. I think of it as designs that have proven themselves over time. Not to mention that many old tools seem to have superior build quality compared to many of todays price cut minimum viable options. (I guess there is a bias there as those well built tools are the ones still around and in use - the price "optimized" tools of earlier are simple not around anymore..?)
As for the precision I think it is simply more a matter of different tools for different work. We tend to get what is best suited or needed for the work at hand. (I think some of those precision tools would be quite useless or ineffective working with wood for instance).
I hadn't seen those foldable caliper rulers before I saw this thread with you and Cody. Those were interesting.
What is the dial meter next to your micrometer? -
A few from me
, had it not been for this thread i wouldn't have noticed rust starting on a couple of them :-[
-
I tried finding one of my more interesting measurement pieces, but I guess I might have used it for pranks one time too many and it suffered the consequences...
Anyway, if you ever want to prank anyone to the brink of measurement and cutting insanity then get a shrinkage ruler and throw it in the normal mix. A shrinkage ruler is used for various casting and ceramics work where shrinkage is a factor from workpiece to the final product. These rulers are slightly longer so that the final measurement after shrinkage will be correct. Thus a ruler reading 50cm might actually be 52cm - I think you can see the level of confusion and frustration this can lead to for the uninitiated... >:D

(A friend once came across a young worker that was busy checking different measurement tools against each other: "Because some of these cheap ones seem to have cut back on the centimeters to save material costs!" :D)
-
Nice mics Borg!!

-
A lot of my gear is old-school. It doesn't quite measure up to your precision kit. :D
Old-school still in use tend to work very well. I think of it as designs that have proven themselves over time. Not to mention that many old tools seem to have superior build quality compared to many of todays price cut minimum viable options. (I guess there is a bias there as those well built tools are the ones still around and in use - the price "optimized" tools of earlier are simple not around anymore..?)
As for the precision I think it is simply more a matter of different tools for different work. We tend to get what is best suited or needed for the work at hand. (I think some of those precision tools would be quite useless or ineffective working with wood for instance).
I hadn't seen those foldable caliper rulers before I saw this thread with you and Cody. Those were interesting.
What is the dial meter next to your micrometer?Very true. A decent caliper and square are almost all I ever need for wood work and most antiques restoration.
That is a distance measure with a tiny wheel that is geared to show the distance on the dial. Not sure of the proper name for it though.
Here are a couple of fun measurement devices. The Craftsman uses sonic pulses tp measure distances. Of course the material bouncing the pulse back can be a problem for the system. It is almost always unreliable at best. The yellow one uses roller wheels and is impractical for accurate measurements. Both were neat yard sale finds. :)
Also, a couple of combination squares.


-
Those combination squares are great to fiddle with, far better than fidget spinners

@Vidar said:
To my horror I found a spec or two of rust myself too! This thread is a life safer!
Those absolute calipers are great!
Yep, i really like them too..my micrometers are practically obsolete now, i will still get the rust off them though incase the world ever runs out of batteries ;)
Thanks WWW, i seem to be missing a 0-1" though, i was so sure i had one, it will turn up

-
Here is a rare one. This one was made by a local inventor some 15 years ago or so. It is basically a device for measuring the nuts, bolts and diameter of round things.
It does that quite well. I guess that main issue might be that a classic caliper style tool of same size does that too, and quite a bit more as well. Still a fun one.

-
That is very cool!

-
Top to bottom: Engineer's scale, Architect's scale and Machinist's scale.

-
Nice scales, smiller!

I've got the small one somewhere around here.

-
Found it with some more measuring gear. The yellow level has a laser line that projects around a room for hanging shelves and pictures. The really cheap caliper is pictured with my other two, which one is good and one is decent.
My favorite ruler is an Empire Stainless double-sided. :)



-
I so want a vintage tape measure to carry, I saw these and was like wow, how cool would it be to get one of these and replace the blade, then I found out Stanley put out an anniversary tape measure, it’s suppose to be like that one marked, yet with a little up to date,
JR

-
@smiller43147 said:
I thought of posting in the Vintage Tools topic, but measuring tools are kind of their own thing, and deserving of their own topic.These were my grandfather's tools. I've seen lots of 6 foot folding carpenter's rules (in wood), but this is the first folding metal rule I've seen.
Sweet Craftsman folding ruler. That’s what we call a “long” C logo when talking about Craftsman tools. I collect long C Caftsman stuff myself. Awesome ruler to have!
-
@Vidar said:
Here is a rare one. This one was made by a local inventor some 15 years ago or so. It is basically a device for measuring the nuts, bolts and diameter of round things.It does that quite well. I guess that main issue might be that a classic caliper style tool of same size does that too, and quite a bit more as well. Still a fun one.
Very neat and interesting nonetheless.
@smiller43147 said:
Top to bottom: Engineer's scale, Architect's scale and Machinist's scale.@gerleatherberman said:
Found it with some more measuring gear. The yellow level has a laser line that projects around a room for hanging shelves and pictures. The really cheap caliper is pictured with my other two, which one is good and one is decent.
My favorite ruler is an Empire Stainless double-sided. :)I need to get myself one of these rulers with the pocket clip!
-
Like flashlights, I didn't realize how many I had until I rounded them up to photograph.
I seem to prefer Stanley. :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login