kamakiri's Former Lurker / New Member Intro (long read)
-
@glenfiddich1983 said:
Welcome, and what a great introduction!
By the way:
(…)
Rangers are great dating tools
(…)
That's what she said!

@Douglas said:
As me Pappy said, "welcome Home"
That's one serious collection and some very artistic work my friend. Welcome to the family, proud to have ya!
Thanks very much Douglas!

This welcome is loooong and starts to feel like a red carpet!
I appreciate all the kind comments!
No knife work so far today...might knock something together if my afternoon frees up.
Might have spent a little *bay time already...maybe I should have accepted FolderBeholder's Feb challenge?
:D -
<u>Warning</u>: Teaser Content Ahead
Spoiler:

Any guesses what's going on here? :D
-
Some form of bladeless compact?
Everything looks backwards :ahhh
Or...

-
Right track...but not bladeless! :D
Good job so far!

-
Is it simply reversed?
The keyring hole and combo tool are facing forward, and also on the opposite side...
And the scissors match that...
Its unique, whatever it is


-
Donors

Don't need no keyrings

Refinishing edges of liners

Spoiler:

Spoiler:

Not sure if I'll have the time to finish it tomorrow. Out of time for today!
-
Looking good

-
Had 41 minutes to get a little more done before I needed to get started on dinner... :ahhh so forgive me for not taking pics at every step!



[/url]
And apparently, I can use the Force to levitate knives:




Still need to finish filing and peening. Anyone notice that I was working with the pins 'free' and not in any jig or board?
Any guesses on the scales planned? Or suggestions what you'd use?

Can I claim the combo tool location as 'kamakiri style'? :D
-
Nice work kamakiri

-
@kamakiri said:
Had 41 minutes to get a little more done before I needed to get started on dinner... :ahhh so forgive me for not taking pics at every step!


[/url]
And apparently, I can use the Force to levitate knives:




Still need to finish filing and peening. Anyone notice that I was working with the pins 'free' and not in any jig or board?
Any guesses on the scales planned? Or suggestions what you'd use?

Can I claim the combo tool location as 'kamakiri style'? :D
I was thinking the free pins where for photo looks.
G10 scales!
-
Great build!

I’ll back the “kamakiri style”

If its a 91, I vote black plus scales

-
@Rapidray said:
I was thinking the free pins where for photo looks.
G10 scales!
That's a great suggestion! I've never had one with G10 before.
Color suggestion, Ray? I'm thinking I'd get some SwissBianco ones in the future when I mod something I really like.Thanks Wspeed! I gotta say I'm not trying to make this one super clean and used the drilled side bushings from both knives instead of the 6 clean ones. Peening is going to be rough as I see this assembly as temporary for my use and testing.
@CallsignBadger said:
Great build!
I’ll back the “kamakiri style”

If its a 91, I vote black plus scales

Been lurking for a while but wasn't sure if it was done before and I never noticed. Thanks CsB! Black is and has been a consideration. And I have some in stock...
Okay, the scales I had at the top of the list were Silvertech...but I've been agonizing over the lack of Plus option. It was mostly for the look, as I was polishing this one inside and out for all visible surfaces. And then put aluminum tweezers in...
Might just stick some temporary red NTO stock I got from Central Valley Wholesale before they closed up Vic sales.
-

G10 does sound nice, though

-
Here are the G10’s - and they are SwissBianco

-
:o

-
G10 does sound nice, though

@Rapidray said:
Here are the G10’s - and they are SwissBiancoThat is nice too... Very GAK-like!

I've had several types of the SwissBianco ones bookmarked...I just find them a little spendy and not always available in plus style or glow dot. Orange has been at the top of the G10 list but some neon green ones have been available cheap recently. :-\
Maybe a little anti-climactic, but I buttoned it up with temporary scales - the take-offs from the donor Explorer while I evaluate carry this mod/build.

For now 'officially' calling it a Reverse Compact Explorer w/ Nail File or Kamakiri Explorer. Probably needs a better name.
shiny inside:

1 pin end is probably not flush on the left side of this pic. ugh.

Probably should cut my own spacer or make it evenly recessed


One issue with putting the in line phillips next to the liner is that it makes contact. I used an interior spacer on one side when I did the double magnifier from earlier because of this issue.


Thanks for the support, suggestions and kind comments during this build! :)
-
'Yeoman Special' was the initial project name...but maybe Reverse Yeoman makes more sense? Small Blade Yeoman? Kamakiri Yeoman?
:ahhh too many options...
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login