Favorite Matches!
-
UCO has sweet fire product similar to those.
Spoiler:
https://youtu.be/CRHsxylWdcI -
Cool...! I mean hot :ahhh
Love the triangular shape. I guess if King Kong smoked this is what he’d use :)
-
Those are cool (guess I should mean hot as well :ahhh ) Max
I have some of the sweet fires headed this way ::) and Diamond also has a similar product for lighting bbq's 
-
I like to use the Weber Chimney. It has been my go to for years.
-
Those are indeed very neat!
I had a similar idea a little while ago- I have two large dogs, and since I am a responsible adult (as far as my dogs are concerned anyway!) I pick up their poop. In the center of these poop bag rolls is a small cardboard tube, and I end up with a lot of them in my pockets as I never seem to remember to throw them out. One day I was looking at them and thinking that if I filled each one with a bit of paraffin and some dryer lint, and stuck a match in the end, I'd probably have a pretty darned good survival match.
Now that we are all talking about it, maybe I will have to look into it a bit more. :D
Def
-
Pics and more pics if you decide to make any
:D -
Here are a couple of the poop bag cardboard rolls and the Redbird matches. I can fit three matches inside the cardboard tube, which would really give it a heck of a kick off, although I am not sure how much paraffin and lint I'd get in there with three of them. Maybe two would be enough?
Sounds like it may be time to start the Great Flaming Poop Bag Experiment of 2019! :ahhh
Def
-
Sounds like an excellent project Grant - let us know how it goes. You may need a way to store the incendiary to prevent the paraffin evaporating. ???
Just make sure the used poop bags are well separated from the incendiaries when you test them

-
I didn't know paraffin evaporated? My plan was to mix some paraffin and lint (or sawdust, or some combination of the two) together until it became a truly sticky, disgusting mess, then pour it into the tube and stick a couple of matches in before it solidified. Then dip the head of the match in some paraffin for waterproofing and let the whole thing set. I figure then when I need it I can just strike the match through the paraffin and the whole thing should burn for a while.
Of course, there's an awful lot in that plan that can go horribly wrong, so it should be interesting. :D
Maybe small bubbles of diesel or something in the middle would keep things interesting! >:D
Def
-
Diesel >:D
Forget pics :D I want video if you try it

-
@Grant Lamontagne said:
I figure then when I need it I can just strike the match through the paraffin and the whole thing should burn for a while.You will need to scrape the paraffin off, first. Otherwise the paraffin gums up the striker and/or prevents 'strike anywhere' from developing enough friction to ignite (before the head gets rubbed off).
Ask me how I know..... :-\
-
I was rummaging through some fishing gear and found these:

"Matches Waterproof, Safety Mk 2"I guess I had these in some field kit at some point. They have to be at least 20 years old...25 years-old would be a better bet. The striker patches are mount on the exterior of the lid top and container base. You can see the cap is cracked, the label has peeled off, and the lid doesn't seal very well.
I took one out and fired it right up, one strike.
-
NATO spec. Very nice

-
@Max Stone said:
NATO spec. Very nice
Exactly what I was thinking when I zoomed in on the pic and saw that
Glad to hear that they lit right up, Nix


-
This thread prompted me to try something out that I’ve been putting off for a while.
Paper matches have many useful virtues, but they are prone to dampness and getting wet. I’ve had matches that were paraffin coated in order to improve their weather/climate resilience, but books of paper matches have become harder to find.
The exception being, Diamond’s green tipped paper matches.
So I thought I’d test out paraffin coating a book of green tip matches and reporting my findings here.

*Fresh book of Diamond Green tips. These have been stored in a cool dry place and kept in a zip top bag. *First thing: If the striker gets gummed up with paraffin, the matches won’t strike, so I covered the striker with gaffer tape to keep it paraffin-free.

Next I dunked the entire book of matches into melted paraffin:

The matches were left to dry.

Once the tape was removed, the striker looked good. I used the pen blade of my SAK to clean off as much paraffin as I could, and then attempted to fire up the green tip:

FAIL.
The match seemed to strike and fire, but then just smoldered. I suspected that some residual paraffin had melted and smothered the match.
So, I tried scraping the match head more thoroughly.
FAIL.
…..and another FAIL.

Just to test the striker. I lit an uncoated match with the coated matchbook’s striker.
No problems (see match above, second from bottom).
I then tested a paraffin-coated red-tipped wooden match on the coated matchbook’s striker (after scraping the paraffin of the red tip).
It fired up, all be it with a slight sputter, initially (see bottom-most match in photo above).
So, for whatever reason, Diamond’s green-tip paper matches are not amenable to being paraffin coated in my opinion.
I labeled the MTo Hack #1 because I though I might try a separate ‘hack’ by just coating the match heads. However, since coating the green-tip match heads proved to be a disaster, I won’t be testing the green-tips further, aside from normal use.
I will say, as they come, green tips have worked well for me.
-
Great test review Nix

How about using an alternative water-proofing material such as a silicone spray or even a non-stick cooking spray?
-
Based on these results, I suspect that a spray coating would similarly stifle the match's ability to burn. And might gum up the striker. But....until it's tested, I suppose it's possible.
I have some PAM cooking spray, but that contains lecithin. Lecithin can act as an emulsifier and bind with water. With that in mind, I think Pam cooking spray would be a doubtful choice. I don't know if other cooking sprays might have similar issues.
I don't think I have any silicone spray. That might be worth testing.
-
Great test, Nix
and to bad it failed :( but we learned that it doesn't work so that is good
silicon spray might work and I will see if I can think of any other type of coating that might make them waterproof 
-
This guy makes Strike Anywhere and waterproof matches
He uses kid cap gun disks and a MT (yes a MT :D ) to make them Strike Anywhere and then dips them in wax to make them waterproof
Just be careful not to pop the caps while gathering material though

- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
Props to him for using a MT to help in making these

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login