GOAT Tools Modular Multi-tool
-
-

-
I like the name too. Apart from the acronym, goats are renowned for their ability to live in rough terrain.
-
-
-
-
The pivots are interesting, but I have some inquiries. I'm making assumptions in my reasoning, so please correct me in places where I'm mistaken. The pivots are shown to rotate to allow the tools to be removed, correct? It looked like the pivot is attached to one of the outer tools to allow ease of access. Generally the outer tools are long ones that someone might use the most. Have you had any issues with the pivot catching on the tool cutouts when it rotates? What about tools slipping off the pivot unintentionally?
-
The basic design looks like it would be very heavy duty, and able to handle anything I would throw at it. The only criticism I have is a personal one--I hate replaceable cutters, as the milling out for them weakens the plier head.
I'm curious, what steel type will you use for the plier head? I would prefer a forged tool steel or D2.
-
Wow just discovered you guys. Is my search for the GOAT (Greatest Of All Time) coming to an end?
It sounds like ya'll are open to suggestions for developing stuff, from what I've read. So thought I'd throw some thoughts out there:- Traditionally, I think the idea with multi-tools is that they all fit very pretty inside the rectangle, and that maybe be the most popular case, but a lot of guys that belt carry on the job really don't care if you have couple of bigger thumb loops sticking out. Spyderco is a perfect example of a company that basically lives off the fact that they offer big thumb loops that some people think are ugly.
- On that same note, I can really see a good Plier style Multi-tool w/ an EMT style pair of shears that folds out. But of course when this goes in your nylon or kydex holster that thumb loop loop for the shears would bulge out.
- I saw that you were making a rifleman's specific multi-tool. So I'm assuming those tools will be available for the customs. I hope a good gun-smith is consulted about these tools. Leatherman makes a multi-tool like this, and i really think that their disassembly punch should be should made of brass and then it could have doubled as a carbon scraper (with a design I see in my head) and had many other uses when working the gun, but again that would be good for brain storming with a gun smith, and I really can see how it too could have been used then for the carbon scraper and many other uses as well.
$.Thanks for making them so we can hammer on them!!!!!!
-
@Mike Dunn said:
Wow just discovered you guys. Is my search for the GOAT (Greatest Of All Time) coming to an end?
It sounds like ya'll are open to suggestions for developing stuff, from what I've read. So thought I'd throw some thoughts out there:- Traditionally, I think the idea with multi-tools is that they all fit very pretty inside the rectangle, and that maybe be the most popular case, but a lot of guys that belt carry on the job really don't care if you have couple of bigger thumb loops sticking out. Spyderco is a perfect example of a company that basically lives off the fact that they offer big thumb loops that some people think are ugly.
- On that same note, I can really see a good Plier style Multi-tool w/ an EMT style pair of shears that folds out. But of course when this goes in your nylon or kydex holster that thumb loop loop for the shears would bulge out.
- I saw that you were making a rifleman's specific multi-tool. So I'm assuming those tools will be available for the customs. I hope a good gun-smith is consulted about these tools. Leatherman makes a multi-tool like this, and i really think that their disassembly punch should be should made of brass and then it could have doubled as a carbon scraper (with a design I see in my head) and had many other uses when working the gun, but again that would be good for brain storming with a gun smith, and I really can see how it too could have been used then for the carbon scraper and many other uses as well.
$.Thanks for making them so we can hammer on them!!!!!!
Just saw that you guys are actually planning on having a body with heavy duty shears instead of pliers. THAT IS AWESOME!!! Perfect for people who need to do rescue.
I take back my other suggestion for shears... well it would be amazing, but I would be satisfied to just have shears as the body if a side tool is impossible. -
-
Just in case ya'll are STILL looking for tools to be inspired by. Aside from what I've already seen I just thought I would make a list of all the coolest multi-tool tools I've ever seen for you. This may take more than one post as I may think of more later. In no particular order:
- Shears. Victorinox Ranger Grip 71 Gardener
- Large Thumb Loop Blade. SpyderCo. SpydeRench ... also...
Victorinox Ranger Grip Boatsman. Also 57, 58, 61,78, 79, 178, 179, Hunter, Alpineer, Forester - Ratchet Set for Bit Kit Victorinox SwissTool X/XC Plus Ratchet
- Whistle & Ferrocerium Rod Leatherman Signal
- Replaceable Fire Arm Disassembly punch Leatherman Mut (I'd prefer a brass punch)
- Replaceable Bronze Carbon Scraper Leatherman Mut
- Carbide Glass Breaker Bit (Unique bit) Leatherman Skeletool RX
- Cutting hook on main blade Leatherman Charge+
- Pressurized Ballpoint Pen Victorinox Manager
Bonus: Leatherman Raptor. Not an additional tool in itself, but its ingenuity is inspirational for future multi-tool bodies and side shears
Sheath: I'd like my sheath to be clip on. My dad had a great Leather clip on sheath when I was a child for his large Swiss army knife. It was great because if we were heading some where, he'd ask me to go grab his stuff, and I'd grab his wallet, keys, and knife, and he'd just clip it onto his waist band. No belt needed. If he had a belt, he'd clip it there. I can't find one like it. So much better then having to undo your belt and thread it through.
I'd love to hear uncommon great tools that others have seen in different multi-tools. And I think they would be great to post for GOAT, as they are the first company that I know that are actually trying to provide what the worker wants instead of just trying to sell us additional full sets to carry. I'm sure what I look to use is different then what other people use. I left out many cool tools because I have already seen that GOAT intends on making this or it is already incorporated into their standard body.
P.S. I read that GOAT is trying to keep it under $100, but I am more than willing to pay double... triple that if they can put everything that I want in one tool, and keep out a bunch of junk I don't need.
-
Interesting ideas with this tool. Looking forward to some updates!

-
Sorry to bump...

Any news

-
-
@SurgeUk said:
Sorry to bump...
Any news

My apologies for the lack of updates! I don't have a dedicated public relations/social media representative yet to keep track of these things haha.
Just got off the phone with our account manager at Xometry to get some new metal parts made. It costs about $1k per metal prototype, so fingers crossed this one will be the final! Spent the last couple of months 3D printing around the clock making millimeter changes trying to fine-tune the design to perfection.
@Mike Dunn said:
Just in case ya'll are STILL looking for tools to be inspired by. Aside from what I've already seen I just thought I would make a list of all the coolest multi-tool tools I've ever seen for you.Thank you for all the feed back and suggestions! I'm adding all of this to a spreadsheet for reference!
-
Fingers crossed for you.
-
Any news/update

I want one

-
-
@Antti Lammi said:
https://m.youtube.com/watch?fbclid=IwAR0hv28brdxYTB34qGwjo9QqYIVCcBR0UUzwehD69MtDhr20ziWzH6vHZZ0&v=bRBKRcrLk6M&feature=youtu.beOnly Tools Matters
Funding met
Just a waiting game now :ahhh :ahhh :ahhh
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


