LM disassembly helper
-
Good job, and great idea!

Sent fra min FRD-L09 via Tapatalk
-
-
Great idea !

-
:D Thanks guys

-
Great work ddogu

-
There is definitely some satisfaction from designing and executing something that works
:) -
Smart one!
[It's not failure if you learn something from it]
-
@gregozedobe said:
There is definitely some satisfaction from designing and executing something that works
:)yeah, especially IF it works


-
Clever

-
A little tip...
most of the time just need one.. Disassemble with the pliers open. On stock factory assembly, the screw will always be on the file and saw side. Use heat to break the locktite, squeeze and hold the handle. The pressure is usually enough to hold the female screw post. So u just need your other hand with one screwdriver to unscrew it... -
@Sam Lim said:
A little tip...
most of the time just need one.. Disassemble with the pliers open. On stock factory assembly, the screw will always be on the file and saw side. Use heat to break the locktite, squeeze and hold the handle. The pressure is usually enough to hold the female screw post. So u just need your other hand with one screwdriver to unscrew it...Interesting tip, thanks. Gonna give this a try

-
well, if anyone is interested
https://youtu.be/gPVHZCcDeOY -
@Sam Lim said:
A little tip...
most of the time just need one.. Disassemble with the pliers open. On stock factory assembly, the screw will always be on the file and saw side. Use heat to break the locktite, squeeze and hold the handle. The pressure is usually enough to hold the female screw post. So u just need your other hand with one screwdriver to unscrew it...Good tip Sam

Especially if those pesky little #8 torx bits are difficult to find on the workbench and you only have 1 available :)
-
@Max Stone said:
@Sam Lim said:
A little tip...
most of the time just need one.. Disassemble with the pliers open. On stock factory assembly, the screw will always be on the file and saw side. Use heat to break the locktite, squeeze and hold the handle. The pressure is usually enough to hold the female screw post. So u just need your other hand with one screwdriver to unscrew it...Good tip Sam

Especially if those pesky little #8 torx bits are difficult to find on the workbench and you only have 1 available :)
#10 
-
@Sam Lim said:
A little tip...
most of the time just need one.. Disassemble with the pliers open. On stock factory assembly, the screw will always be on the file and saw side. Use heat to break the locktite, squeeze and hold the handle. The pressure is usually enough to hold the female screw post. So u just need your other hand with one screwdriver to unscrew it...Interesting tip, thanks. Gonna give this a try

but of course there are times when some screws are super duper tight. Your DIY tool will come in handy. 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
:o