The Hacked Leatherman Owners Club.
-
:D SL!! -
I've got at idea for a 'retro' Rebar...(maybe PST III) apologies if this has been done by someone before, but here goes:
- Take the handles from 2 PSTs.
- Bisect all the handles length-ways so that the cut edge of the 'extended' side runs perfectly central along the spine, pliers to tool end.
- Reassemble like a Side Clip, but only using the 'extended' handles.
- You can now place long tools on all sides of the pliers, like the Rebar, winning 2 more tool slots. (5 tools a side)
- You'll lose the inch rule, as these sides of the handles get discarded.
- You'll need to extend the tool pivots by about 2.5mm to accommodate the extra width, and maybe a thin washer.
You do you guys think?
-
Something to try next weekend Sam?
-
Still loving the WaveClip, Sam
nice changes as well 
I also like the idea of the PSTIII
be nice to have 4 long tools in a PST type frame


-
@Max Stone said:
I've got at idea for a 'retro' Rebar...(maybe PST III) apologies if this has been done by someone before, but here goes:- Take the handles from 2 PSTs.
- Bisect all the handles length-ways so that the cut edge of the 'extended' side runs perfectly central along the spine, pliers to tool end.
- Reassemble like a Side Clip, but only using the 'extended' handles.
- You can now place long tools on all sides of the pliers, like the Rebar, winning 2 more tool slots. (5 tools a side)
- You'll lose the inch rule, as these sides of the handles get discarded.
- You'll need to extend the tool pivots by about 2.5mm to accommodate the extra width, and maybe a thin washer.
You do you guys think?
I think you should do it !

-
do it !!! 
-
Here's a quick mock-up...

-
It will basically be a 4 inch Supertool
which will make it a retro Rebar, nice 8) Nice mockup pic 
-
Excellent can’t wait to see what you come up with Max

-
-
But.. But... That would be a pulse without lock....
-
So busy with a little design work on the layout. Either adding a saw and SE blade to the existing PST tool load (like picture below), or same, but replacing the awl with scissors like you find on PST II.

What other options do you guys think I should consider? Would prefer to keep the tools LM, but prepared to reshape if needed.
-
Don’t know why I haven't been here before

Well hello

-
Hello Badger

-
Hey CsB

If it were me I would try to get scissors in there somewhere, Max
If not then you will have the same tools as a Supertool but that isn't a bad thing ;) Other than that I have no other preferences 
-
Did the whole Mod in under 2 hours. Was surprisingly painless using the squirt PS4 to unscrew the Rebar.
I shortened the flat driver and made it into a chisel so that I didn't have to change the internal frame at all.
https://www.instagram.com/p/BtPHsHjBSOK/?utm_source=ig_web_options_share_sheet
Cheers,
HG -
@Happy Gilmore said:
Did the whole Mod in under 2 hours. Was surprisingly painless using the squirt PS4 to unscrew the Rebar.I shortened the flat driver and made it into a chisel so that I didn't have to change the internal frame at all.
https://www.instagram.com/p/BtPHsHjBSOK/?utm_source=ig_web_options_share_sheet
Cheers,
HG:tu: like the load out. Looks like just what everyone will need in a multi! :like:
-
@Max Stone said:
So busy with a little design work on the layout. Either adding a saw and SE blade to the existing PST tool load (like picture below), or same, but replacing the awl with scissors like you find on PST II.
What other options do you guys think I should consider? Would prefer to keep the tools LM, but prepared to reshape if needed.
I dun have any other things to add. But I would think that after you cut the handles into 2, the spring tab for the tools are going to be pretty weak and soft.. U may find the lockup to be less than desirable. This is speaking from my little bit of experience. The frame of a Sideclip is thicker than a pst so it doesn't have this issue. In fact the spring tab for the Sideclip is pretty strong..
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login