Favorite Matches!
-

Good looking matchcase.

-
Is there a way to attach the cap to the base with a lanyard?

-
@Nix said:
Is there a way to attach the cap to the base with a lanyard?
I was just thinking about that and I don't think there's a great way to do it. However, the knurling on the bottom is very aggressive so one may be able to tie a little turk's head bight with some cord and attach the pieces that way. I wouldn't be terribly confident with its staying power, though.
Also, the tolerances on the cap are pretty tight (relatively speaking, it's not finished like a Rolex by any means but it is better than I expected it to be) , and the O-ring is a snug fit in the cap. It would probably take some doing to accidentally lose the cap in a pack, and if you're using the case, I guess you have to stick the cap in your pocket or hold it in your match hand

-
That is a down right slick looking match safe :o 8)

Something to get next time I have some extra funds :D
And grey happens to be one of my favorite colors

-
Also thanks for the pics

-
I'll make sure to keep you all informed about any findings I make in use. I'm hard on my gear, so if there's a materials or engineering issue, I'll find it... i sincerely doubt there will be, though. 6061 aluminum is pretty reliable, the ano looks like it was done pretty well, and the machining is clean enough that I dont foresee any issues.
-
@thatotherguy said:
I'll make sure to keep you all informed about any findings I make in use. I'm hard on my gear, so if there's a materials or engineering issue, I'll find it... i sincerely doubt there will be, though. 6061 aluminum is pretty reliable, the ano looks like it was done pretty well, and the machining is clean enough that I dont foresee any issues.

After a bit of use could you give is some thoughts on it
It looks very well made as you said though, so you shouldn't have any problems 
-
I'll make sure to keep you all informed about any findings I make in use. I'm hard on my gear, so if there's a materials or engineering issue, I'll find it... i sincerely doubt there will be, though. 6061 aluminum is pretty reliable, the ano looks like it was done pretty well, and the machining is clean enough that I dont foresee any issues.

After a bit of use could you give is some thoughts on it
It looks very well made as you said though, so you shouldn't have any problems 
Will do. Ill use it for a while and report back with my findings.
-
I'll make sure to keep you all informed about any findings I make in use. I'm hard on my gear, so if there's a materials or engineering issue, I'll find it... i sincerely doubt there will be, though. 6061 aluminum is pretty reliable, the ano looks like it was done pretty well, and the machining is clean enough that I dont foresee any issues.

After a bit of use could you give is some thoughts on it
It looks very well made as you said though, so you shouldn't have any problems 
Will do. Ill use it for a while and report back with my findings.
Very good looking case.

Something that could last for years and protect the matches. Depending how humid your climate is, you could throw a few rice grains in to help absorb any residual moisture that could get trapped inside? -
@Max Stone said:
I'll make sure to keep you all informed about any findings I make in use. I'm hard on my gear, so if there's a materials or engineering issue, I'll find it... i sincerely doubt there will be, though. 6061 aluminum is pretty reliable, the ano looks like it was done pretty well, and the machining is clean enough that I dont foresee any issues.

After a bit of use could you give is some thoughts on it
It looks very well made as you said though, so you shouldn't have any problems 
Will do. Ill use it for a while and report back with my findings.
Very good looking case.

Something that could last for years and protect the matches. Depending how humid your climate is, you could throw a few rice grains in to help absorb any residual moisture that could get trapped inside?Good idea. There's certainly enough extra room in there

-
I'll make sure to keep you all informed about any findings I make in use. I'm hard on my gear, so if there's a materials or engineering issue, I'll find it... i sincerely doubt there will be, though. 6061 aluminum is pretty reliable, the ano looks like it was done pretty well, and the machining is clean enough that I dont foresee any issues.

After a bit of use could you give is some thoughts on it
It looks very well made as you said though, so you shouldn't have any problems 
Will do. Ill use it for a while and report back with my findings.
Thanks otherguy

-
I'll make sure to keep you all informed about any findings I make in use. I'm hard on my gear, so if there's a materials or engineering issue, I'll find it... i sincerely doubt there will be, though. 6061 aluminum is pretty reliable, the ano looks like it was done pretty well, and the machining is clean enough that I dont foresee any issues.

After a bit of use could you give is some thoughts on it
It looks very well made as you said though, so you shouldn't have any problems 
Will do. Ill use it for a while and report back with my findings.
Thanks otherguy

My pleasure.
Initial thoughts are very positive. I like the quality and overall form factor of this case considerably more than the Marbles match safe and US military surplus plastic safe it replaced. Only benefit the Marbles has over it, aside from aesthetics which are subjective, is the captured cap of the Marbles. In order to lose that cap, you have to lose the whole safe. However, I've never had a problem keeping up with the cap on the surplus safe, so it's far from a big deal. I like the integrated striker design a lot and think it will work well for normal use, though I will probably end up carrying a backup striker in the chamber as well (as I do with all of my other safes) simply because I don't like the idea of having to rely on the wee little one alone in a pinch.
-
Just found a brand called England's Glory matches that use to be made in England but they are now made in Sweden :D Who has any of these and can you make pics of them
:D Anyone in the UK
or Sweden
:D Cool looking artwork on the boxes from what I have seen but a real pic from a member here would be so much better

-
Also found that the same company makes Scottish Bluebells

Bit of history on them both here at Wikipedia

-
Have you all heard about the old sportsman's field expedient match safe? A spent 12ga and 20ga shell will nest together and render matches rainproof in a hunting vest. I believe a 10ga and 12ga will also nest for a little bit larger safe. Plastic shell hulls are super light as well, and the expanded crimping at the head of each shell gives the nested hulls enough friction to stay together OK.
-
I might have heard of that years ago
but not extremely sure
it is a good idea, especially if somebody is hunting and gets lost but still has matches with them and need to keep them dry 
-
@thatotherguy said:
Have you all heard about the old sportsman's field expedient match safe? A spent 12ga and 20ga shell will nest together and render matches rainproof in a hunting vest. I believe a 10ga and 12ga will also nest for a little bit larger safe. Plastic shell hulls are super light as well, and the expanded crimping at the head of each shell gives the nested hulls enough friction to stay together OK.Great recollection. I had heard of that, many years ago.
Seems like it would be better than nothing. Which begs the question: what is the hunter doing with matches and no match safe?

-
Have you all heard about the old sportsman's field expedient match safe? A spent 12ga and 20ga shell will nest together and render matches rainproof in a hunting vest. I believe a 10ga and 12ga will also nest for a little bit larger safe. Plastic shell hulls are super light as well, and the expanded crimping at the head of each shell gives the nested hulls enough friction to stay together OK.
Great recollection. I had heard of that, many years ago.
Seems like it would be better than nothing. Which begs the question: what is the hunter doing with matches and no match safe?

Honestly, most hunters I know (self included) dont carry matches in the first place. You'll usually find a Bic or cheap Bicalike in their kit. I think the old spent shells trick is somewhat a relic of the past, perhaps dating from the Depression era when you had to make do with what you had. I'd bet a lot of those cases were made out of shells guys found littering the ground.
Ninja edit: maybe they were most common with a 12 and 16 ga shell nested? The Sweet Sixteen was pretty popular around the turn of the last century, if memory serves. Shells would have been pretty easy to find.
-
Alrighty, laddies and germs, the Matchcap has gotten its first use. I like it. I like it a lot. However, I disagree that the proper way to strike the match is from the opening towards the o-ring as Exotac recommends. I popped the heads off two matches doing that- the follow through hit the head of the match on the little ledge under the striker and above the o-ring and popped it right off. I prefer striking the match at around a 45 degree angle towards yourself, which gives you ample striking surface to ignite the head and plenty of room to follow through, plus easy ability to provide shielding from the wind. Will update if anything changes in my opinions as I continue to use it.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
