The Hacked Leatherman Owners Club.
-
Hey CsB

If it were me I would try to get scissors in there somewhere, Max
If not then you will have the same tools as a Supertool but that isn't a bad thing ;) Other than that I have no other preferences 
-
Did the whole Mod in under 2 hours. Was surprisingly painless using the squirt PS4 to unscrew the Rebar.
I shortened the flat driver and made it into a chisel so that I didn't have to change the internal frame at all.
https://www.instagram.com/p/BtPHsHjBSOK/?utm_source=ig_web_options_share_sheet
Cheers,
HG -
@Happy Gilmore said:
Did the whole Mod in under 2 hours. Was surprisingly painless using the squirt PS4 to unscrew the Rebar.I shortened the flat driver and made it into a chisel so that I didn't have to change the internal frame at all.
https://www.instagram.com/p/BtPHsHjBSOK/?utm_source=ig_web_options_share_sheet
Cheers,
HG:tu: like the load out. Looks like just what everyone will need in a multi! :like:
-
@Max Stone said:
So busy with a little design work on the layout. Either adding a saw and SE blade to the existing PST tool load (like picture below), or same, but replacing the awl with scissors like you find on PST II.
What other options do you guys think I should consider? Would prefer to keep the tools LM, but prepared to reshape if needed.
I dun have any other things to add. But I would think that after you cut the handles into 2, the spring tab for the tools are going to be pretty weak and soft.. U may find the lockup to be less than desirable. This is speaking from my little bit of experience. The frame of a Sideclip is thicker than a pst so it doesn't have this issue. In fact the spring tab for the Sideclip is pretty strong..
-
my dream setup:
Charge with 2x s30V blades, Surge Blade exchanger, Vic scissors on the outside.
Inside:
Side #1
2D leatherman bit exchanger
Small flat driver (deep reach and can also unscrew Philips screws in a pinch)Side#2
Awl
Chisel/Prybar (not sure which one more useful yet)
????? Not sure what to have as tool #3 (I would like it to be a multi-purpose tool like a scalpel blade holder)3D printed Scales (set up to allow the blade exchanger, a holder for an additional leatherman bit, AND a small slot for Vic Tweezers. I have a 3d printer and would love to do something unique with it.)
I'm sold on double S30V blades though. Talk about edge retention!
Cheers,
HG -
HG,
I may have some extra parts to help make your dream setup happen. Shoot me a PM if you want to discuss.
-
Sent you a PM, definitely interested.
I really want to get a charge too so that I can start doing some design for 3D printed scales. I don't see why I cant fit all of the Vic attachments into them. And from 1-2 spare 2d bits.
Cheers,
H.G. -
Yes I was thinking about that Sam. I may need to TIG spot weld. Will check once it’s all together. Thank for the advice.

-
@MaxStone- if you allow me, i would suggest to have
A:Blade, Awl, Philips, Straight driver, Scissor
B:File, Can Opener, various drivers , Saw -
If it were me I would try to get scissors in there somewhere, Max
If not then you will have the same tools as a Supertool but that isn't a bad thing ;) Other than that I have no other preferences 
I agree. Scissors will be good. Will have to sacrifice something as there are only 10 slots and shape/length limitations, so giving it some more thought. :)
-
Since you’ll have a bit holder and a potential spot in the scales to hold a bit, you could always go grind a chisel bit.
-
@Tarheelpwr said:
Since you’ll have a bit holder and a potential spot in the scales to hold a bit, you could always go grind a chisel bit.Interesting idea Tarheelpwr to create a bit holder between the scales.
there may be clearance issues on the inside, will have to check. -
Has anyone tried putting a gerber hex drive on a leatherman wave?

possible? thoughts?
-
No idea but it would take a lot of grinding to a Wave handle to accomplish this I think
be cool to get one to work on it though 
-
You know, I need to get into MT hacking

I have an idea for my Wave >:D
-
I'd do the grinding if I could get my hands on that driver. Problem is the rest of the tool is meh. So it would be hard for me to buy one. Anyone have a spare for sell or trade?
-
First mod is underway. Hunting tool is apart and ready for action.
My pic is too large to attach.
-
Here's some info on an app for resizing pics
/post/1843243
-
Also a few in Apple store. I use Resize It. Let’s see those pics Tarheelpwr :)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login