February Fixie Challenge
-
Here is the knife I will be using. It is a custom piece by a Texas knife make, Joseph Bowen. The design is pretty cool and is small enough to fit comfortably in a pocket or as a neck knife. It originally came with a cool satin finish but for some idiotic reason, I had it cerakoted which you can see is not holding up at all.
The blade is a chisel grind so I only have to sharpen the one side and Mr. Bowen did a nice convex grind. I use this one occasionally but it has been sitting on a shelf collecting dust lately. That is why I'm only going to use it for this challenge because I believe it has a lot of potential.



Ken
-
That’s a real nice custom blade Ken. Should have many uses and looking forward to seeing it over the next few weeks.

-
@KBM3 said:
Here is the knife I will be using. It is a custom piece by a Texas knife make, Joseph Bowen. The design is pretty cool and is small enough to fit comfortably in a pocket or as a neck knife. It originally came with a cool satin finish but for some idiotic reason, I had it cerakoted which you can see is not holding up at all.
The blade is a chisel grind so I only have to sharpen the one side and Mr. Bowen did a nice convex grind. I use this one occasionally but it has been sitting on a shelf collecting dust lately. That is why I'm only going to use it for this challenge because I believe it has a lot of potential.



Ken
That is a kinda cool knife...as to potential, I agree!

-
Day 01:
Max wanted a little intro for our knives, so here is mine.

This is a Knives of Alaska (made in Texas) Ulu. It's really an interpretation of an Ulu, but obviously does have a curved blade with a centered handle. The Ulu is an ancient design, predating metal knives, from the northern reaches of the planet. This one seems a bit small for the type. KOA use D2 tool steel for the blade and gives it a chisel grind (I think this is the most common grind for Uluit (the plural of 'Ulu' is 'Uluit'.)).
I've long been intrigued by this style of knife and can see some ergonomic advantages with a largely symmetrical knife. It is ambidextrous and can be used like a chisel with the bevel in or out. It seems like a design that can be used easily with gloves or mittens. I got the KOA version just to try it out. KOA is known for making a rock-solid knife and I'ma fan of D2. This size seemed practical for regular carry, even EDC, so I thought I'd give it a shot.
After a little use, I can say that this style of knife takes some getting used to. Almost as soon as I got it, I thought a 30-day challenge would be a great way to try to adapt to the Ulu and try to learn how to use it. That's why I'm using it in this challenge.

We'll see. There is a fair chance I'll end up hating this knife. As El Peace has pointed out, it doesn't have the best point. I'm not sure how well it will do for some wood carving tasks: the old 'chest-lever' grip will be tricky with this one. I've never been a big fan of asymmetric (i.e. chisel) grinds. There is a lot that can go wrong here....
On the other hand, I've found that experience is a great teacher. And, despite the introduction of knives with in-line handles, the Ulu continues to be a popular knife in Northern latitudes. Maybe I'll discover something new for me, here.
Challenge on!

Add: Sorry for the rusty square.....I wanted to give you guys a sense of how small this thing is.
Hopefully I'll get an action shot in here later today......

-
Sweet lookin' knife, Ken!
Seems a bit like a blend of ulu and in-line knife. I'm really interested to see how it works for you!
-
That’s a great intro Nix

In the Stone Age, the hand axe followed this design and served our ancestors well, so it’s great to see cultures maintain this arrangement.
What sheath does it have?
At least you won’t fall foul of a blade length restriction. Not sure they would know how to classify this blade?
-
Thanks guys

And great pics everyone!
Sent fra min FRD-L09 via Tapatalk
-
Taking Nix’s lead, here’s some background to my fixie:
Made by Stuart Smith, Smith Hand Forged Knives, in South Africa. All pieces one-off based on materials he can get his hands on (if it bends or melts he uses it).
Single large ball bearing hand forged and heat treated. Tapered tang. Simple solid design, nice leather sheath.
This is the first time it’s out the draw, so I’m really looking forward to using this month as a working knife.
Thanks for looking!




-
Randall Made Knives are made in Orlando, Florida. Back in 1970, a couple of the town’s claim to fame was the military bases, Martin Marietta and Randall knives! Back then, a lot of people never even knew where Orlando was. That would come a couple of years later, and the town into a city.
This is the Triathlete model. No handle as it was designed to be the lightest and smallest knife for runners. The Esee Izula almost shares the same length and size, as a reference of comparison. It makes a nice EDC as it is small enough and tucks away on the body very well and doesn’t get any second glances, which is a good thing in city surrounding now a days. Being stainless steel it will hold up very well in the Florida environment.


-
@Rapidray said:
Randall Made Knives are made in Orlando, Florida. Back in 1970, a couple of the town’s claim to fame was the military bases, Martin Marietta and Randall knives! Back then, a lot of people never even knew where Orlando was. That would come a couple of years later, and the town into a city.
This is the Triathlete model. No handle as it was designed to be the lightest and smallest knife for runners. The Esee Izula almost shares the same length and size, as a reference of comparison. It makes a nice EDC as it is small enough and tucks away on the body very well and doesn’t get any second glances, which is a good thing in city surrounding now a days. Being stainless steel it will hold up very well in the Florida environment.That’s a real sweet fixie RR and great for EDC. Thank you for the details and history. I’ve been to Orlando a couple of times in the 90’s (sales conferences) and the flatness and retirees were the stand-outs for me.

-
Great start everyone

My next mod may be a micro folding Ulu, it doesn't look like it would take much to do, i don't have much use for a watch opener anyway :D
Day 1
Just a bit of rope cutting today

-
@Max Stone said:
Randall Made Knives are made in Orlando, Florida. Back in 1970, a couple of the town’s claim to fame was the military bases, Martin Marietta and Randall knives! Back then, a lot of people never even knew where Orlando was. That would come a couple of years later, and the town into a city.
This is the Triathlete model. No handle as it was designed to be the lightest and smallest knife for runners. The Esee Izula almost shares the same length and size, as a reference of comparison. It makes a nice EDC as it is small enough and tucks away on the body very well and doesn’t get any second glances, which is a good thing in city surrounding now a days. Being stainless steel it will hold up very well in the Florida environment.That’s a real sweet fixie RR and great for EDC. Thank you for the details and history. I’ve been to Orlando a couple of times in the 90’s (sales conferences) and the flatness and retirees were the stand-outs for me.

I call Florida the dead state! With the exception of the ocean, gulf and fishing! Being a military brat, I have been blessed to travel around. See different countries and cultures. Great food also. As soon as you leave Florida and head north, you see the change of seasons. The mountains in the distance, have their own uniqueness with the seasons. Always changing.

-
@Max Stone said:
Taking Nix’s lead, here’s some background to my fixie:
Made by Stuart Smith, Smith Hand Forged Knives, in South Africa. All pieces one-off based on materials he can get his hands on (if it bends or melts he uses it).
Single large ball bearing hand forged and heat treated. Tapered tang. Simple solid design, nice leather sheath.
This is the first time it’s out the draw, so I’m really looking forward to using this month as a working knife.
Thanks for looking!
Nice

And very cool that it's made of a ball bearing!Sent fra min FRD-L09 via Tapatalk
-
@Max Stone said:
Taking Nix’s lead, here’s some background to my fixie:
Made by Stuart Smith, Smith Hand Forged Knives, in South Africa. All pieces one-off based on materials he can get his hands on (if it bends or melts he uses it).
Single large ball bearing hand forged and heat treated. Tapered tang. Simple solid design, nice leather sheath.
This is the first time it’s out the draw, so I’m really looking forward to using this month as a working knife.
Thanks for looking!
That is a very nice looking knife and sheath. I like the “if it bends or melts he uses it” reference! Looking forward to more posts on this one.
Actually all of them. It just hit me that unlike the other challenges, everyone is using the same knife, and on this one, it’s all different knives...this is going to be really good!
-
@Max Stone said:
Taking Nix’s lead, here’s some background to my fixie:
Made by Stuart Smith, Smith Hand Forged Knives, in South Africa. All pieces one-off based on materials he can get his hands on (if it bends or melts he uses it).
Single large ball bearing hand forged and heat treated. Tapered tang. Simple solid design, nice leather sheath.
This is the first time it’s out the draw, so I’m really looking forward to using this month as a working knife.
Thanks for looking!
That is a very nice looking knife and sheath. I like the “if it bends or melts he uses it” reference! Looking forward to more posts on this one.
Actually all of them. It just hit me that unlike the other challenges, everyone is using the same knife, and on this one, it’s all different knives...this is going to be really good!
It sure has started great, now we just need to keep up

Sent fra min FRD-L09 via Tapatalk
-
@Max Stone said:
Made by Stuart Smith, Smith Hand Forged Knives, in South Africa. All pieces one-off based on materials he can get his hands on (if it bends or melts he uses it).
Single large ball bearing hand forged and heat treated. Tapered tang. Simple solid design, nice leather sheath.Wow! I liked it before; now I love it!

-
@Rapidray said:
Randall Made Knives are made in Orlando, Florida. Back in 1970, a couple of the town’s claim to fame was the military bases, Martin Marietta and Randall knives! Back then, a lot of people never even knew where Orlando was. That would come a couple of years later, and the town into a city.
This is the Triathlete model. No handle as it was designed to be the lightest and smallest knife for runners. The Esee Izula almost shares the same length and size, as a reference of comparison. It makes a nice EDC as it is small enough and tucks away on the body very well and doesn’t get any second glances, which is a good thing in city surrounding now a days. Being stainless steel it will hold up very well in the Florida environment.I really like Randall knives. Classic design. Very functional.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



