The can opener
-
You can also use the can opener like a finger nail, without the risk of injury. It's a good staple remover.
Στάλθηκε από το HUAWEI VNS-L31 μου χρησιμοποιώντας Tapatalk
I've fund many uses of the can opener that doesn't involve any cans. Staple remover, hood for taking a pot off the campfire, used as a hook for pulling the pin form the trailer hitch so I don't bang my arthritic fingers on the trucks frame. Useful for opening those pistachio shells that only have a tiny crack that's too small for a finger nail to open.
Like most SAK tools, it's useful for way more things than it was designed to be.
I wondered when the thread would broaden out to the other uses for the can opener.
It (and the bottle opener) are great general purpose prying tools. The can opener is narrow and thin at the tip, but flares out, making it a good "starting" pry tool, with the bottle opener's large screw driver for finishing the job (if needed).
It also works as a phillips screwdriver with several different sizes of phillips head screws.
As mentioned, a Pioneer/Soldier/SI can opener is the best staple remover that I've ever used.
And yes, I've even opened a few cans with it. -
@kottskrapa said:
It's really good to take apart Legos as well [emoji846] or you can do this
Still works for cans but much better as a driver
[It's not failure if you learn something from it]
Ditto here. I used to use them on camping trips as a boy and younger man, but canned goods have been replaced by dehydrated foods on all my camping trips now. So now I turn them into fine screwdrivers for spectacles and the like, and get much more use out of them.

-
If it wasn't for the can opener, i'd have starved to death in grad school. It's a must have on all my user SAKs (mainly Tinkers).
Rich -
I use it a lot, too, for multi purpose. Can opener, knife blade are my most used tools.
-
Its an awesome opener with a flathead that can be used for phillips. Both are great beyond their intended use

I really like them

-
I use and prefer it over the hand crank type we have. And I hate the electric counter-top ugly space wasters.
Also a good scale pry tool when needed.
-
Well, I do seem to be an anomilie.
Ill have to find a can and open it, just to see how it goes.
The problem is that in our house, the little missus takes umbridge at anything out of a can.
We have an electric can opener that was given to us on our wedding day 39 years ago, its been used perhaps 10 times, maybe.
She likes to cook fresh with fresh food and when we go camping we still eat fresh food and lots of fish that we catch.
I went through the pantry just last night and found 3 cans out of 7 that didn't have a ring pull.
One I threw out, it was over 5 years old.
One was pineapple juice, that uses a different kind of opener.
One was coconut milk, same as above.It was actually quite an eye opener, my missus just don't use cans.
Looks like Ill have to buy a can to test it -
-
It is a magnificent tool. I couldn't be without it. I have three frequent uses for it.
It is by far my favourite can opener of any kind. Not necessarily for always being the fastest or always making the neatest cuts - with good technique and luck it can achieve both those things - but also for being reliable and simply pleasurable to use.
It is my main Phillips driver whenever a dedicated screwdriver isn't close enough at hand.
It is the ideal tool for extracting spitter connectors from irrigation lines. Just work the cutout of the opener under the flange of the connector, and lever it out. Easy peasy. My workmates without SAKs faff about with pliers and screwdrivers that have to be got from a distance and that can wreck the connectors if they're otherwise reusable.
I use it as a hook now and then.

-
Valkie
I open juice cans regularly with the Vic, on the pour side open it an inch then pry it back with the bottle opener to give a spout, then vent the opposite side with a single slice
-
@Valkie said:
The problem is that in our house, the little missus takes umbridge at anything out of a can.Excellent!
Here in the states, canned tomato paste is more common than tomato paste in a tube. Apparently canning tomato paste is an American thing. I prefer the convenience of the tube-type tomato paste (usually Italian). But the tubed stuff is expensive, so I always have a can of canned tomato paste on hand for soups, stews, and sauces.
-
The problem is that in our house, the little missus takes umbridge at anything out of a can.
Excellent!
Here in the states, canned tomato paste is more common than tomato paste in a tube. Apparently canning tomato paste is an American thing. I prefer the convenience of the tube-type tomato paste (usually Italian). But the tubed stuff is expensive, so I always have a can of canned tomato paste on hand for soups, stews, and sauces.
You mean, something like this...

-
good stuff. No can open required...... -
One of the best uses for the Vic can opener is removing screws with stripped threads due to over tightening or corrosion. Start by working the blade under the edge of the screw head while turning it with another driver. Then continue turning and prying outward untill you can get the hook under the screw head adding even more outward pull untill you reach good threads. I've used that technique 100's of times to pull screws other guys gave up on.
-
Great tip

-
It’s a great multi-purpose scraper, light pry bar, screwdriver, and it can open cans too. It’s probably my most used tool. I won’t carry a SAK without it.
-
House brands (often with regional chains) and smaller, regional brands typically do not have pull-tops from my experience. Just used my Bantam's combo tool to open a quite heavy gauge 28 ounce can of Allen's brand Italian Cut green beans and it worked well (first time I've ever used a combo tool on anything other than a German Army Knife), though I think the stress I was putting on that little knife was a bit borderline (and my Bantam is an older Ecoline model with the Swiss Federal emblem as a shield, it probably only has the three pins, not four).
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

