Show off your Sak mod's!
-
Figured I would do a little group photo of my humble mods. Nothing fancy but my own mods on my kitchen table
The yellow "expedition" was the first I did and are the tools I like and use the most

After that I did a bladeless to be able to have a SAK where a blade are big NO like at the bar and other festivities and I wanted the full opening layer

Then was going to make an alox version of the yellow one but I missed to drill out the Phillips to go with the 3mm pin so out of frustration and practice I made an bladeless alox

The size and weight of the alox version is just perfect! Feels really good in the hand and for use

So here they are.. I do have some more plans, but we will se when they will be made. Mostly for fun and no real need

[It's not failure if you learn something from it]
-
That’s the danger of diy mods... just can’t stop

-
Kind of addictive! But I will have to get my self a proper workbench soon
[It's not failure if you learn something from it]
-
I have just completed this whole thread and I don't know what to say.. Just wow! So many great mods and scale work!
Lots of names that I don't recognize from before I became a member that has really done some great work!
I also realized that the mods I have done has been done before and if I just taken the time to go through this thread I would have had most of the answers that I was looking for.. Saved some pics of the tools layout for future reference too..
Took to long to go through it again but for everyone that hasn't been following it from the beginning I truly recommend it
[It's not failure if you learn something from it]
-
^ Definitely a weekend well-spent.

-
@kottskrapa said:
Another bladeless and in contrast to the previous from jaya_man this is on the thin side.Not proud about the peening and I'm not sure if I'm going to fix it or not.. But it's practice before doing my 93mm expedition


[It's not failure if you learn something from it]
Just saw this.
Nice, great mod, I like it!
-
@Don Pablo said:
Another bladeless and in contrast to the previous from jaya_man this is on the thin side.
Not proud about the peening and I'm not sure if I'm going to fix it or not.. But it's practice before doing my 93mm expedition


[It's not failure if you learn something from it]
Just saw this.
Nice, great mod, I like it!
Thanks!
[It's not failure if you learn something from it]
-
Recently completed another mod, finally... on the thin side this time... Just can’t see some good parts lying around... Might as well utilize it..
The scissor came from an 84mm with broken backspring... A Golfer I think... For this build, I retained the stopper from an 84mm and used and combined it with that from an old 91mm scissor backspring...


Disassembled a cadet alox and swapped the opener layer with the completed scissors layer... Now I get a Voyageur...

This baby will now be my designated dress SAK for carry on formal occassions... Silver looks nice I must say...
-
That's lovely J-Man

-
Thanks Mags

-
I’ve been holding off for a while now, had some parts laying around from my mod Syph did and I figured why not make my own perfect pocket knife, so I played around with what I had, put everything on toothpicks then even found a brass finishing nail that was dead on the perfect size, only problem was I only had one, but I cut it up into three pieces and what you see works perfectly, next step would be to disassemble the other sak and reassemble it with the parts you see, just have to find the right rod,,
JR

-
Took it a step further and took the one apart, then spent a good hour figuring out the best way the parts would line up and temporarily set it up..
Tools include:
Blade / Nail file
Scissors (serrated)
Philips / carabiner
Saw
Can / bottle opener
Back side:
Awl
PhilipsAs you can see I have a bonus part, a hex key, now I’m not big on having double parts and I could use this to replace the Philips on the back but for what?
Anyway here’s some pics
JR


-
Nice configuration!
[It's not failure if you learn something from it]
-
Very nice!

JR -
@MadPlumbarian said:
Very nice!
JRthank you !
here is a pic opened :
-
Nice work!
[It's not failure if you learn something from it]
-
Thinking of adding a detachable spork to the inline awl of a sak, perhaps a small collar over the spork handle?
Anyone tried adding a mod to the awl, feels like it would hold a mod?


-
Here we go, Spork Sak measured up!

-
That's quite interesting.

How will you make it fit?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login