February Fixie Challenge
-
Great pics and uses!

Day 11:
Opened a package containing some bog oak.

Sent fra min FRD-L09 via Tapatalk
Bog oak...never heard of that wood...well oak yes but not bog...that looks like a nice black color. On par with ebony?

From what I've found out it's an ancient oak tree which has been preserved in peat, with hard black wood.
Sent fra min FRD-L09 via Tapatalk
You are right on the ancient part...I went and googled it and they are over 1000 years old to 7000 years old ( one from Russia says 7400 ). Great history and age.

-
Day 9
Great pics everyone
Helping out in the kitchen tonight. A little pasta and a G&T.





-
Nix, I would love to see an instructional post on making leather sheaths. That one you made is great.
-
RF, that bog oak looks great. Cool find!

I think so too

Now I just need a full tang blade to put it on
Sent fra min FRD-L09 via Tapatalk
Looking forward to seeing it!

Me too

Might try and make a full tang blade myself when I get my hobbyroom sorted.Sent fra min FRD-L09 via Tapatalk
-
Day 08:
Used the ulu to slice up a roast beet to use in sandwiches for lunch. Worked well, but again I found that I have more control with a chef's knife where I can see my cuts more clearly. The chisel grind is OK, but requires a bit more attention to slice in straight, precise manner. The bevel wants to veer off a bit. I think this is just a learning issue, not a knife design problem.

-
Day #9 - cheese duty at a get together.

Sent from my Redmi Note 5
-
day 9: ginger and leuku fought. leuku won
<a href="https://flic.kr/p/244hZbD" target="_blank" rel="noopener noreferrer"><img src="https://farm8.staticflickr.com/7891/40075026493_77f33e255f_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>2019-02-09_08-30-26
-
Used the ulu to slice up a roast beet to use in sandwiches for lunch. Worked well, but again I found that I have more control with a chef's knife where I can see my cuts more clearly. The chisel grind is OK, but requires a bit more attention to slice in straight, precise manner. The bevel wants to veer off a bit. I think this is just a learning issue, not a knife design problem.

Nice slicing from what I see.

on the learning part...practice makes us better. -
@FInixNOver said:
Day #9 - cheese duty at a get together.

Sent from my Redmi Note 5
Thats some tasty looking cheese there!

-
@styx said:
day 9: ginger and leuku fought. leuku won<a href="https://flic.kr/p/244hZbD" target="_blank" rel="noopener noreferrer"><img src="https://farm8.staticflickr.com/7891/40075026493_77f33e255f_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>2019-02-09_08-30-26

Glad to hear that!

-
Nix’s Sheath Tutorial — Part One
First a little philosophy: it is very hard to make a great sheath. At least I assume so, because I’ve never made great sheath. On the other hand, it is fairly easy to make a good working sheath. I have made a few of those.
In fact, I’ll go so far as to say it is likely that you can make a nicer sheath than the sheath that came with your knife. Most commercial sheaths are fairly lame. Even the sheaths that come with many custom knives are only fair. You can make a better sheath.
Maybe more importantly, you can make a sheath to meet your specific requirements and design. That’s what drove me to make a new sheath for the JK Kephart I posted earlier.
So, I think it is worthwhile trying to figure out how you can make a sheath for your favorite knives.
Here I’m working with leather, but most of the principles will apply to other materials, too.
While I think I could probably make a leather sheath with just a Victorinox Spartan (I haven’t proven that theory, yet.), I think you’ll make a sheath much more easily and quickly with a few tools.
First off, I’ll show some of the tools and materials I’ll use for this next sheath, then we’ll talk a bit about design.

From top (12 o’clock) around clockwise:
Sewing thread: Ritza Tiger thread (available on the web) has become my favorite tying material, but you could use any tough string (like the hemp or Tandy waxed thread). I like 1.0-1.2mm thread. If you use something like the raw hemp string shown, you’ll need to wax that thread, so you’ll want a small puck of bee’s wax, too. Waxed thread slips through the leather more easily and will be more durable.
I suppose you could use wire instead of string. I would not use monofilament fishing line because I don’t think it will stay put and might unravel. Staples, rivets, or Chicago screws might work nicely, too.
But I like traditional thread. I’ll be using the Ritza Tiger thread for this project.
Awls: I like a diamond point awl to make a hole for sewing and a round awl for opening up the hole when working my needles through. The round awl is somewhat optional, but made a huge difference for me, so I’m a convert.
if you don’t have and awl, I think you could sharpen a few nails into a diamond shape to make your sewing holes. Then a hammer and nail-awl technique could be used to bang in the sewing holes.
Some sheath makers use a drill press and thin drill bit to drill the sewing holes. This technique has some real advantages, but I don’t like it. When an awl is used, it ‘parts’ the leather. After the leather is sewn, the leather can ‘heal’ and close up around the thread, especially if you dampen the leather and work it a little. The fibers of the leather can lock back together and close the hole. A drilled hole stays a hole and seems less secure to me. The old-school way is to use an awl, so that's what I do.
Nevertheless, a lot of people swear by the drill press technique. I think it is fast, easy, and more precise (than I am). So, if you don’t have some awls, consider using your drill press and the thinnest drill bit you’ve got. Or you can chuck a small nail in the drill press and use that. (I've heard that works well).
Needle nose pliers: these are helpful for pushing a needle through the leather. I wrapped these pliers with duct tape to prevent the teeth from cutting into my needles and weakening them.
Template: the white material on the hobby mat is thin cardboard. I like to use something bendable, but stiff to make a template for the sheath. A couple of times I’ve used an old file-folder. These are great for making templates.
Knife: This will be the knife for which I’m making the sheath. But I can also use it to cut some materials. I made this knife from a Koster blank (4” Bushcrafter. Obviously it’s not a Puukko.). I’m pretty sure it was a 3V steel blank. Koster does great work, too. Link: Koster Knives. I still need to clean this knife up a bit, but it’s more or less ready to go to work…..just needs a sheath…..
Ruler: somewhat optional, but it’s nice to have a measuring tool or two to help with layout. If you don’t have a ruler, we can use a USA penny or nickel to help with our layout. More pn that later.
Barge cement: This stuff is great for leatherwork. It is definitely optional, but I started using this with the very first sheath I made and will probably use it when ever I can. With Barge cement you won’t need to grow a third hand or make a saddlemaker’s bench clamp. It doesn’t have to be Barge cement, but some sort of contact cement is really helpful. I suppose you could use some other glues, but you will end up sewing through the glue, so whatever you use, it has to be flexible. Barge cement is the way to go.
Pen and pencil: More optional stuff, but I really like using a pencil to layout my design for my template. I can adjust it as I go. A red pen is great for tracing out the template onto the leather. Red is preferred because it will disappear under brown or black leather dye. If you aren’t going to dye your sheath, you’ll want to be very careful with your layout.
Craft knife. Sometimes you’ll need to make a very precise cut. A craft knife will be very helpful, but is optional.
Center:
Leather. Get some good vegetable tanned leather. I think most sheath makers recommend 8-9oz leather, but I have come to prefer 7-8oz leather. This leather measures between 3-4mm thick. You can see it has faded and been slightly discolored while hanging out in the garage. This will disappear and even out with staining.
Sample template. This was just part of a template I made for a friction sheath for a folder. Just included as an example.
Needles: If you are going to use thread, you’ll need needles. At least two. Four is probably better (they can break). The needles should be pointy, but don’t need to be sharp. I like using harness maker’s needles, either 2/0 or 3/0 size.
John James needles are very good. C.S. Osborne carries really nice needle, too. Actually, Osborne carries a lot of great leather working tools. Link: C.S. Osborne Leather Tools .
Fabric and Craft stores may carry harness needles. But I'm sure other needles could work just as well. Perhaps embroidery needles or needlepoint needles. Just make sure the ye can accommodate your thread.
Ok, sorry for the long post, but I thought we’d better cover some basic stuff right off the bat.
I’ve probably made this sound more complicated than it really is. Just keep in mind, we’re only going to fold up some leather and sew it shut in a useful way. There is no ‘right way’ as far as I know, and I’m sure I do it one of the many wrong ways. But it usually works out just fine.
Next up: Design.
-
Nix’s Sheath Tutorial — Part Two
So, now you've gotten leather and rivets and a knife all pulled together. At this point, you need to come up with a design.
The design should be fairly precise, but don't sweat it too much. Leather is a forgiving material, and we can resort to some 'cheats' if we need to. However, the better our design and layout is, the easier the whole process will be.
My sheath will be symmetrical. This is somewhat conventional, but, really, arbitrary. Since the sheath will be symmetrical, I folded my cardboard in half to establish a center line. Then I laid the knife next to the center-line. I learned to lay the knife's spine on the center line, but this resulted in too tight a sheath, especially for thick-handled knives. Now I set the knife just a bit over the center line. Then the knife is carefully rotated over to it's side. Then the knife's silhouette is traced out.
At this point, I can start planning where I want the top edge of the sheath to come up the knife. The bottom inside edge is defined by the very tip of the knife. The bottom exterior edge gives me space for the welt and a bit of a margin for stitching. In general, it's nice to have 1/4" of leather welt protecting the stitching from the edge and 1/4" from the edge of the sheath to the stitching line.
In this case, I've used a penny in place of a ruler to mark out the margin between inside bottom and outside bottom edges. (I normally use a pencil so I can change my design, but it didn't show up well in a photo, so I'm using a marker instead. grrrr.....)

Pretty simple, right?
Let's talk about the 'welt' for a moment.
A welt is a strip of material (leather in this case) that acts as a spacer, but, more importantly, protects the stitching from the knife's edge. You MUST have a welt. Otherwise the knife will cut open the stitching, fall out of the sheath, and stab you in the leg. While your friends will think this is hysterical, it'll bring your hike or trip to an early end.
The strip of leather below this sheath has been cut to form a welt:

OK. So now that I've got the basic size and shape of the knife mapped out, I can begin to think of extra design features.
What shape do I want the sheath?
I think I'll go with a rectangular shape for this one. No reason, really, but a rectangle is fairly nondescript and non-threatening. Plus it will let me add some extra stitching and a tie-down hole.
What kind of belt loop do I want?
I often sew in a belt loop as a separate unit, 1/4 of the way down the sheath. For this one, however, let's go with a 'fold-over' belt loop. A fold-over doesn't snug up quite as well, but it does sit a little lower, which is convenient with a pack.
Now that I have that in mind, I can use my penny to give me an even spacing for my welt.

In the above photo, I've added the back edge of the sheath, using my penny to space out the edge from the guard (the widest point). Since this is the widest point, the sheath has to be wide enough, all the way to this point for the knife to be able to slip into the sheath. Since I'm going for a rectangular sheath, I just dropped the back edge line straight down from here.
I've used the top of the penny (halfway across my welt distance) to mark out a stitching line. This isn't necessary, but it helps me to visualize how I'm going to stitch the sheath together later.
I now have my basic design layout. I used the cardboard layout with my knife to test out how it will work. I may have made it a bit big, but I think it will work out. Time to cut out my template.....

One of the problems with a fold-over belt loop, is that it makes for an irregularly shaped piece of leather to cut out and I always feel I'm creating more scrap than necessary. But this looks like it'll work. I allow 2" of length for a 1.5" wide belt (just works out better) and then an inch of length for stitching the end of the belt loop down. In this case I added a little extra so I can have the top of the loop end up a bit higher than the top edge of the sheath. This is for a right handed sheath. A lefty could just flip the template over to get a LH carry sheath (I did that by accident once and now have a LH carry knife.)
We'll see how that awl works out.....
-
Excellent tutorial Nix, tool wise i'm good to go i think, i only have a couple of feet of thread though, hopefully that should be enough

Day 9, back to the Buck

-
Gorgeous!

-
Part three of the sheath tutorial will have to wait for tomorrow......

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

