Toothpick firestarters
-
Hi all,
Just looking at these : http://kck.st/2xDkczL
For anyone who has one, can you comment on their quality /reliability?
This may sound like a daft question, but it's there any danger of them sparking if you pull them from the sak too quickly??!

Also do you know if they are available to buy from anywhere in the UK?
Thanks in anticipation :)
-
I have one that's installed into my EDC Executive. No chance of sparking while removing or inserting.

Sent from my XT1635-01 using Tapatalk
-
I have some in a couple of SAK's.
They fit well and I don't see any risk of falling out.
They do spark well, too. But they are small! (About the size of a toothpick....duh...
) So they throw a small amount of sparks. I tested one out and started a couple of fires using vaseline cotton balls or waxed jute for tinder. Worked great.........until I snapped it in half.

They are small and fairly fragile. It's important to strike them (gently) along the thin edge, not the flat edge. Or one could break them....

Still, even with the one that was snapped in half, I could still throw a few sparks and light off some jute fibers.

The Firefly ferro 'toothpicks' seem like a real tool to me, not just a gimmick. I wouldn't plan on using one as my primary fire starting tool, but as an emergency backup, when I might not otherwise have matches or a fire-steel with me. They seem like a good resource.
The caveat to all that is that you had better have some really good ferro-rod skills to use them. If all you have is that Firefly, you'd better be able to get some fine, fine tinder together that is dry and ready to take a small spark. I tested mine with cotton and jute, knowing that would give me the tinder that would work. But, odds are that if I don't have a proper ferro-rod or matches with me, I probably won't have prepared tinder either. So, I'll need to be very creative in getting good tinder pulled together in order to use that small shower of sparks. This might be a good argument to keep a couple of flattened vaseline cotton balls in your wallet as emergency tinder.
Don't know about UK availability.....

-
and especially striking on the edge, not the large flat surface.
Great review!

-
Ok, well.... I think I could use some of these.
Especially after reading Nix's review
-
An additional option for your SAK if you use a lanyard are toggles.
-
That pic was borrowed from the interwebs. I've seen them also placed onto folks outdoors shoes, onto the laces. Lots of versatility with the toggles.
-
I've never tried them, but they seem like a great idea.
I imagine they could be made fairly easily, too.
-
Not following this thread. How are toggles related to toothpick fire starters? ???
-
My earlier response to Craggus' inquiry got me thinking.....
I decided to make a wallet-sized fire starter for that most unlikely situation where an emergency fire might be required.
I started with one (1) cotton ball and worked a bunch of vaseline into the cotton. I then stretched it out and flattened it. The squashed cotton 'ball' got placed in a thin envelope made from a plastic bag.

The envelope got sealed in one layer of duct tape. This small packet of fire-starter now fits easily into one side of my wallet. It adds a bit of bulk, but not an enormous amount.

I'm quite pleased wit this so far. We'll see if after a bit of wear and carry if the vaseline works it's way out of the plastic and duct tape. Slippery stuff. But, for now, I think it will work.

Thanks for the prompting, Craggus!
-
But wait.....
Does the wallet fire-starter work?
Only one way to find out......

I took half of the cotton out and fluffed it up as well as I could. The vaseline makes it stick together. Not ideal. I dropped that in the snow and got out a Firefly.....
Two strikes later and I had fire!


Don't worry, the snow didn't catch on fire. But the cotton did not go out. It kept burning and burning...and burning....
I didn't time it (sorry), but I'd estimate it burnt for about one (1) minute. Maybe a bit longer. It burned itself right into the snow.......

I think this is a good result. I'll try testing another after I've carried it around for a while.
-
Great idea

-

I blame Craggus. :D
-
@smiller43147 said:
Not following this thread. How are toggles related to toothpick fire starters? ???Those toggles also throw sparks just like the firefly rods. They're a good alternative if you want something a little more substantial

-
I think you are right. You could lay the Firefly on a flat object to support it. I haven't tried that.
When striking with one now, as above, I support it with my finger and just strike gently, focusing on pushing down, along the long axis of the 'rod', and not trying to carve huge globs of burning metal from the little guy.

I'm certainly no expert with these, and there may be a few people out there with more experience and better ideas.

-
:D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
