February Fixie Challenge
-
Day 10
Currently sitting at the airport, waiting for the wife to arrive. Not much cutting done today, mostly cleaning up the messes I made while she was away!![emoji3]

Ken
Sent from my iPhone using Tapatalk
-
@Nix said:
Nix's Sheath Tutorial -- Part ThreePiecing out the leather.
In the last part of the tutorial, we came up with a design. So far it has cost us a little ink and a scrap of cardboard. Not a big deal. But next we are going to cut into that nice piece of leather, so it’s a good idea to check things over. Is the belt loop on the correct side? Is it big enough? Did we allow enough room for the welt?
Once the design and template seem to be right, it’s time to translate the template into pieces of leather.
The first step for me is to trace out the template onto the leather. Then the sheath profile get cut out from the leather. We’re committed now!

It’s good to be precise with these cuts. I’ve left a bit of margin, which is not helpful, but won’t be a problem.
Next, I cut my welt template out of the master template:

Now you can see why I drew the welt line onto the master template. Using the welt template, I laid out the primary welt on a piece of scrap leather (4mm thick).
Then I cut out the secondary welt template or spacer template from the primary welt template.
I’m only going to use one (1) secondary welt with this sheath. If the handle were thicker, I might consider using an extra welt to give the handle more space in the sheath. Keep in mind, the more layers of leather you have, the tougher it becomes to sew them all together.

After laying out the secondary welt, I realized that I has a scrap piece of leather that would be perfect for my secondary welt. So, I’ll use the scrap instead of cutting out a fresh piece. The scrap is a bit oversize, but that won’t pose a problem. The excess will get trimmed off after glue-up.
The next few steps will be: 1) cutting in some grooves on the inside of the sheath to help make folding easier, 2) gluing in the welts, and 3) sewing down the belt loop.
However, the end of the belt loop should not be left square. Sharp corners on a sheath are not strong and easily snag, leading to torn stitches and a failed belt loop. So we really should shape the end of the belt loop. It is easiest to do this now, while the leather is dry and flat.
Here was my technique:
I made a straight line across the strap. I then used the rim of a jar to trace a curve from one side of the line to the end of the loop. Then the same on the other side. My two curves meet in the center line (basic geometry) and give me a clean shape to stitch down later.

The excess got trimmed off:

So, I now have my leather pieced and ready to start assembling. I used the template to mark a center line on the inside of the sheath. I also marked out the position for the welt to be glued in. Those lines will be helpful for the next steps.

That as far as I got today. Hopefully, I’ll get more done tomorrow.
Keep up the good work Nix! Great tutorial
Can't wait for the next part
And it's definitely not boring!Sent fra min FRD-L09 via Tapatalk
-
Stuck at work due to the storm we're having. Here's a vanity picture until we get into some fun together!

-
Day 11:
Time for a tea
-
Green tea Sak? Looks like something illegal

-
Shhhh.

Just kidding.
green tea, peppermint, ginger, goji berries, not sure about it yet it's a new one for me.
I have an Oolong Chai to use as back up. -
Some good options there, enjoy

-

My favorite special treat tea is the Bigelow spiced chai tea!
-
Day 11 photo

-
Nice pic RR.

-
Day 11:
Time for a teaNice!

Thanks
@Rapidray said:

My favorite special treat tea is the Bigelow spiced chai tea!
Is that the brand (Bigelow)?
I especially like a chai towards winter but getting a bit tired of ordinary black tea at present.Love that knife Ray

Yes Bigelow is the brand. Winter is my favorite time for this one also. Green tea and Earl Grey are my usual...mostly green.
Thanks I am liking it more and more every day. Perfect size and sits just right on the belt.
-
Day 11

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



