kamakiri's Former Lurker / New Member Intro (long read)
-
I said I buy crap...sometimes it's not intentional.
Small blade in the listing only mentioned 'light scratches' and said nothing about the very pronounced BENT TIP ::)
Mother Hamster Smurf it ALL:

a bit better:

Still too visible from the blade side:

Good enough to leave for now. At least it sits nowhere near the main blade now.

Rest of the knife and the edge on this blade was great so I didn't want to bother with a return or refund or pulling it apart to replace the blade. I have enough of those to do that I knew about when purchasing. ::)
Just glad I didn't have any errant blows and ruin the factory edge. Still cuts nicely and separates news print just fine.
-
Luckily it’s not too badly bent kamakiri

-
Yeah, not too bad and I've fixed worse but with some degradation of the cosmetics. I'm more concerned with not marring the edge or sides on this one. Making it straight might come at the expense of some surface dimpling. I always try for the 'right' fix for the given condition.
-
Excellent job on the blade straightening

-
@kamakiri said:
Yeah, not too bad and I've fixed worse but with some degradation of the cosmetics. I'm more concerned with not marring the edge or sides on this one. Making it straight might come at the expense of some surface dimpling. I always try for the 'right' fix for the given condition.Or... you've got to know when to stop :D
Excellent fix Kamakari
-
Hey Grant, what's new?

-
@MTMatt said:
Hey Grant, what's new?
First answer that came to mind is: Sourdough. :D
A friend of ours gave me some active starter so I thought I'd give it a go and use it in my pizza dough and make some sourdough loaves.


SAK-wise I've been going through and cleaning/repairing recent arrivals. Mostly busy work and light repairs. Started pulling apart some of the donors for my next project, but have only started 2 (SwissChamps) of the 5 or 6 it needs. Might get more done later today. Gonna be a little slow on the prep for this one. I want the polish to 'match' on parts from different eras. Gonna be a bit of work if I choose an unpolished/machine finish pruner blade. And since so many spacers and liners will be loose I need to cherry pick though the parts after some cleaning. Doesn't help that I'm still mulling over the tools to include.
Sounds less fun the more I type! :D
-
I love sourdough bread

It's just not something you can do in a hurry, like a pizza.That new SAK project of yours sounds... big

Btw, found a nice "period correct" addition to the Traveller



-
Nice one Matt

-
@MTMatt said:
I love sourdough bread
It's just not something you can do in a hurry, like a pizza.That new SAK project of yours sounds... big

Btw, found a nice "period correct" addition to the Traveller

Nice addition, Matt!
I always include the mini SD when possible.Is there still stuff coming out of the joints between the tools and liners/springs? I only used oil (Vic MTO) to clean it so I wouldn't risk damaging/melting original scales with alcohol.
I only used the starter (no commercial yeast added) for the pizza dough too...so while it's quick on the prep time, it's still taking a while to rise. I normally do refrigerated proofing for my pizza dough over 3-5 days, but I was inclined to leave these out for a few hours this morning just to give them a faster start. I'll probably bake those Friday. Gonna attempt the bread loaf tomorrow if I don't forget a feeding for the starter.
-
I've got all the "stuff" out as it seems. There wasn't much left, just a bit

I'm using Ballistol.I had the scissors grinding at the backspring suddenly. I worked that away carefully with lots of open-close actions, oil and cleaning after every 5 cycles or so.
It's all good, I love it

Enjoy your sourdough bread. My wife makes some sometimes.

-
That's interesting about the scissor spring. I didn't notice anything visually or in operation. Vic MTO is pretty thick and could mask contact surface roughness. If the Ballistol lube component is on the thin side, it might not like the shearing action.
Must be nice to have your wife make it. Mine prefers simpler projects like soda bread. Pleased with my first attempt!



-
That’s just

-
-
@kamakiri said:
That's interesting about the scissor spring. I didn't notice anything visually or in operation. Vic MTO is pretty thick and could mask contact surface roughness. If the Ballistol lube component is on the thin side, it might not like the shearing action.Must be nice to have your wife make it. Mine prefers simpler projects like soda bread. Pleased with my first attempt!



Just want to make sure, don't mean the tiny spring on the scissors. I mean the spring for the tool itself. I think it's called backspring?
It was working smoothly initially, so it's a bit weird it did develop that suddenly. Maybe some "stuff" that came loose and got caught under it
I've added a pic...
Tasty looking bread Grant


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

