Victorinox SwissCard
-
@kkokkolis said:
I airtraveled with my Nailcare Swisscard (and Wenger Traveler) with no problem. I was surprised to find a complimentary sewing kit in card format at the Jumeirah Hotel, Abu Dhabi, UAE.
I like it and thought it is worth posting.
I could post to any kind of forum with things I saw here. These people are insanely rich and they like to show it. This petrified wood stone is rare and very expensive. They simply used hundreds of square meters of it and myriads of marble, granite, alabaster, everything.

Yeah, I'd be pretty surprised given that the Swisscard alone is worth like 2-3 of my typical hotel nights.
And the blade changes are interesting, but maybe no one just has info on them for now?
-
@Huntsman said:
PS. Did you or anyone else see my post on the previous page re the blade changes? ??? - Any comments folks?A couple years ago I did special investigation for Russian gun forum https://forum.guns.ru/forummessage/391/1905027-m45258212.html about changes in SwissCards and their blades. It is directly linked with "metodime" site http://victorinox.metodi.me/swisscard.php information and as usual based on comparative analysis of tonnes internet photos and some catalogues.
So, briefly about blades. All SwissCard generations and models since 1996(1997) used to have 74mm knife blade moulded into a plastic handle (cutting edge down). Only since 2003 for SwissCard Lite they have started using special design blade (cutting edge up). For other models they used to use 74mm blade until approximately 2009. Since that I see all the models with new design blade.
For sure, I can be wrong, so if anyone has more precise information - please correct me.Upd: So after a year of carrying I withdrew Swisscard out from my wallet but left a pen and "quadro" screwdriver instead of it (specially bought).
-
Thanks FM - Wish I spoke Russian/Ukranian !
Although the Swisscard blade is thinner than the 74mm - At least when I looked at mine!
Which is strange - Right?
If they were going to use the 74mm blade you'd think they use exactly the same blade or a completely different design
Not a thinner one - as presumambly this is a different manufacturing process ???EDIT PS: The SAAMS site says the first SwissCards had riveted scissors - Which seems strange as the SC came out in '97 and Vic switched to riveted scissors in '92, so you would think they had always been riveted. I have a very early SC and it certainly has riveted scissors!
-
@Huntsman said:
Although the Swisscard blade is thinner than the 74mm - At least when I looked at mine!Which is strange - Right?
If they were going to use the 74mm blade you'd think they use exactly the same blade or a completely different design
Not a thinner one - as presumambly this is a different manufacturing process ???I have looked at three mine 74mm knifes and their average thickness is 1.5mm. But all mine are too old and were made before 1992 (they have screw on scissors), thus in 1997 the thickness of 74mm blades might be less, or might not. After some investigations and discoveries I am sure in nothing :) May be somebody else who has old type blade can help us. Does old blade (I mean 74mm type of blade) have a stamp the tang or does not?
If anyone has more modern 74mm knife than mine (approx. 1996-2000), could you measure the thickness of its blade?
So, let's return to Swisscards. Thanks to LeaF, I got some pictures and measures (Fig. 1) from his collection. As we can see, old blades have 0.87-0.90mm thickness, and modern ones have 0.88-0.96mm. My Swisscard' blade is 1.0mm thickness. So, modern blades I can divide in two groups: one has 0.88-0.90mm and second one has 0.96-1.0mm. I suspect, it might be two generations of modern blades. I think, we need help from other Swisscard owners.
So, can you measure your Swisscard blade at the definite place (Fig. 2) and tell us its thickness as well as the year of Swisscard production. The year can be found if you look through the Card (Fig. 3). e.g. mine was made in April 2012.@Huntsman said:
EDIT PS: The SAAMS site says the first SwissCards had riveted scissors - Which seems strange as the SC came out in '97 and Vic switched to riveted scissors in '92, so you would think they had always been riveted. I have a very early SC and it certainly has riveted scissors!This I do not understand, sorry. All Swisscard scissors through the years used to be and still are riveted, are not they?



-
I have two : one is from September 2004, and the other is from March 2011
both have a 1.00mm blade tang :)
-
Bumping this back up as I am curious what others think.
This appears to be a Gen 2 SwissCard, but the box has a copyright of 1996.
Which generation do you think this is?

-
EDIT PS: The SAAMS site says the first SwissCards had riveted scissors - Which seems strange as the SC came out in '97 and Vic switched to riveted scissors in '92, so you would think they had always been riveted. I have a very early SC and it certainly has riveted scissors!
This I do not understand, sorry. All Swisscard scissors through the years used to be and still are riveted, are not they?
Sorry folks I mistyped Sams says this
"SwissCard 1st generation contained screw-joint scissors while later those replaced by rivet-joint scissors."
........Under the tools pic
http://victorinox.metodi.me/swisscard.phpSo yes FM - My point was I would have thought that they would always have been riveted? ???
Hey and thanks for all the info

@ FB - I wold say Gen 1 as solid colour
I guess no protractor ? ??? -
If there’s a protractor, it’s a Gen 2... solid or translucent color is not a determining factor... I can say this as I have translucent Gen 1 and 2

-
Hmmm - Depends what determines Gen II - I thought it was translucent - Eg If you check SAMS
Hmmmmm some more - Just checked SAMS again - The pictures seem to indicate Gen II = Translucent
But the features table seems to indicate protractor presence determines Gen 2
As always: Dating/generations is more of an art and opinion than scientific/definitive ???
-
Based on SAAM’s... I would say only the protractor was added on the Gen. 2
Plus I think SAKwiki needs a little update as well... Protractor is present on solid colors and not just translucent... I have a sample...

-
Update:
The Heliswiss card did not have a protractor on the back and the scissors were riveted together.My newest that arrived:
Gen 1 card (seen on the left), does not have the protractor and has screw together scissors.
And the one I bought this morning, awaiting shipment details:

-
If anyone has a Swisscard with the magnifying glass for sale let me know.
I would like to give one a try :-)
My email is mashguy4077@yahoo.com
-
@FolderBeholder said:
Update:
The Heliswiss card did not have a protractor on the back and the scissors were riveted together.My newest that arrived:
Gen 1 card (seen on the left), does not have the protractor and has screw together scissors.And the one I bought this morning, awaiting shipment details:
Nice collection of SwissCards FB!

-
-
Congrats Lisa... Be careful, those swisscards can be addictive like classics...

Sent from my iPad using Tapatalk
-
Hard to find them... I think evilbay still sells just the money clip which can be attached to any swisscard with nail file slot...
Sent from my iPhone using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

