Gerber Flik revival
-
@Sam Lim said:

Definitely. A tested and fail proof design. Simple is best.I bet the Flik would have sold better with that configuration. I watched a youtube video a long while ago where someone didn't even realize the pliers needed to be engaged. Imagine how crappy it would to be to use like that.

Very crappy! I nicknamed mine the Flik & Poke, as you had to prod the latching pawl with your finger to get it to engage
-
In the poor Flik's defence; I carried it as my main MT in my job as a maintenance engineer for a long time and never had a serious issue and certainly never with the pliers. Not to say the design can't have problems, but I used mine pretty hard and they still work perfectly. I do like the revival job though.

-
@AimlessWanderer said:
Very crappy! I nicknamed mine the Flik & Poke, as you had to prod the latching pawl with your finger to get it to engage
One of my Freehands came with the issue. I loosened one of the slider screws(lower) and it started working properly. Not saying that would work on another one, but it did do the trick on the Freehand. :ahhh@Gareth said:
In the poor Flik's defence; I carried it as my main MT in my job as a maintenance engineer for a long time and never had a serious issue and certainly never with the pliers. Not to say the design can't have problems, but I used mine pretty hard and they still work perfectly. I do like the revival job though.
I can't say any of mine have severely failed either. One of my Fliks got carry time and still works flawlessly. The one I worked on was purchased as a dud. It worked great until I broke it down for parts. :ahhh
Wish I hadn't taken it apart for parts now, but I did get the saw and phillips in an MP600. The saw required a special bushing I made and the phillips was a minor grind and drop-in. The Flik tool pivot is odd, as the center pin is standard Gerber size pivot, but the screws act as pivots for the outboard tools, which have a larger pivot size.
-
@Gareth said:
In the poor Flik's defence; I carried it as my main MT in my job as a maintenance engineer for a long time and never had a serious issue and certainly never with the pliers. Not to say the design can't have problems, but I used mine pretty hard and they still work perfectly. I do like the revival job though.
Was at first concerned the 2 pivots wouldn't align and screw up the opening and closing. Pretty glad they worked out.

-
I am glad to see someone reviving the Flik. It's an odd model and those pawls just complicated things, but I have to say that it was, at one time one of my favorites, despite it's oddities.

Now mostly I don't carry it simply because if it was lost or damaged I'd be up a certain creed with no means of conveyance.

Def
-
@Grant Lamontagne said:
I am glad to see someone reviving the Flik. It's an odd model and those pawls just complicated things, but I have to say that it was, at one time one of my favorites, despite it's oddities.
Now mostly I don't carry it simply because if it was lost or damaged I'd be up a certain creed with no means of conveyance.

Def
it sure is an odd ball. Heavy tool with oddly short and too cute implements. :D -
Despite my mocking it, there were plenty of aspects that I liked about the tool too. I'm working from memory here, and it was several years since I last handled one, but I'm pretty sure the plain edge knife was good, and indeed one of the better multitool blades for scoring type cuts (the art deco serrated one was covered in fash on mine), the scissors were excellent, the saw was OK, but maybe a bit thick, and the ergonomics were very good. The drivers while stubby were well formed, and the can opener that can't would at least serve as an awl/scribe IIRC. It wouldn't have taken much effort to make it into a far more impressive tool.
Making the pawl segments out of one piece instead of two, would fix the deployment mechanism. Aside from that, I think the pliers were fit for purpose. An extra 6mm or 1/4" at the tail end of the tool would not have spoiled pocketability or ergonomics, but that extra 1/4" translated to longer drivers would have significantly improved the 4 (?) short external tools. Then offer one model with serrated blade, and another with three sided file, and you've got a much stronger competitor than you had before.
Whether you like the Flik or not, I think most of us would agree it could have been better than it was, without too many changes.
-
So they did. They came up with the Freehand. Everything was bigger and longer. But they stuck to the same cute tools. :D
-
Yeah. The same size drivers/openers on a MUCH BIGGER tool.

-
@Sam Lim said:
it sure is an odd ball. Heavy tool with oddly short and too cute implements. :D

What happened to the rest of the hair on the Troll TP! -
Hi!
Did you made the rail slot wider to fit the MP600 plier head?Many thanks..
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login





