What do we have on the way?
-
Pioneer X. I've been after one for a while, and just picked one up in hiraethus' for sale thread.
It's destined for surgery eventually, but want to give it some carry time before that happens. First though, I need to figure out some cheap, quick and simple way to change the feel of the scales. I utterly abhor the feel of the 84mm and 93mm alox scales. It sets my nerves on edge. I might try gluing some thin leather on as a temporary fix.
-
You could try coating it with some clear nail polish.
-
@SteveC said:
You could try coating it with some clear nail polish.Would that fill the "tread" of the scales? I don't think it's the aluminium that's the issue, as I don't have this issue with the Gerber Balance or even my alox Rambler with it's smaller pattern. I'm wondering if I might even get away with just sanding it flat.
-
I think it would fill in the grooves probably take a few coats, maybe sanding the flats in between coats. But yes I suppose you could just sand the scales flat as well.
-
It would look nice sanded flat but I would try and leave the shield

-
@SteveC said:
I think it would fill in the grooves probably take a few coats, maybe sanding the flats in between coats. But yes I suppose you could just sand the scales flat as well.Maybe a bit of both (a bit of filling, and a bit of sanding) would be in order, and would stop me risking sanding into the peened heads on the pins.
Maybe some two part epoxy would do the job too, so long as I can keep it away from moving parts of course. -
@Wspeed said:
It would look nice sanded flat but I would try and leave the shield

Looking at my Pioneer Harvester that's awaiting the same fate, the shield is quite high, so any sanding would probably remove it. That said, I don't get too sentimental about that stuff. When I start making my own scales, I'll not be recreating a cross on them. Besides which, they only get to put it on knives they've finished. If I have to refinish it to get what I want from it, then I get to choose what logo it has :D
-
Got a Spartan and a Tinker coming in from Canada

Trying to slim down my EDC, so one of those 2 SAK‘s might just be my new goto multi. -
Sounds good SVL have you got any pics

-
Not yet, will post some as soon as i have them

-
Cool look forward to seeing your pics

-
Hopefully my OH GAK is here tomorrow
Only Tools Matters
-
Looking fwd to seeing that too Antti.

-
Nice one Antti fingers crossed for you

-
Since LM had them so cheap, I bought four of the Realtree camo sheaths for large MTs. Didn't have to pay a cent, as I used my gift card from the last free ship/free $15 gift card for this one, which was going on again at present, so I'll be getting an $15 gift card again.
Mostly got them because my Surge and ST300 came with MOLLE sheaths; and those have quite limited use unless you have a MOLLE pack for EDC or camp.

-
I just bought a Limited Edition Karl Elsener set at 30% off...
-
Nice buys guys

-
Seller's original asking price was a bit above the prices you see on eBay for example. So the 30% off put it about 20% below the real market price.
Which is a rather complicated way of saying I paid €81 for it :)
-
YeahI got that part :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
