What Did You Use Your Multitool For Today?
-
That is pretty cool! I just wonder, do you have to bounce off the radio signals over a relay? Because earth‘s curvature should prevent a direct connection between Netherlands and Brazil, right?

-
No, for shortwave, that is not done by a relay, it is a direct contact. The Antenna radiation angle will send the signal into the ionosphere, where it will bounce back down again.
For local contacts on 144-146mhz there are many relays here, but that is for short distance like 50km or so
-
Very interesting, thanks for providing some details

-
I used the Centerdrive Today to remove the intake wall plate from a Central Vac system in a huge house.
Then I grabbed a non-conductive fish tape and reamed the pipe in the wall for a few hours attempting to dislodge a blockage of some kind.
I closed the connections with the pliers to make the vac turn on with no hose attached to test the reaming?
I then took a Shop Vac to the thing and alternated between sucking with the shop vac and blowing with the central vac trying to move the blockage in either direction even a little bit!
After about 45 minutes of this I was able to grab and extract some kind of furry beast with the CD Pliers thus restoring the inlet to working!!!
I am not a Vac technician.

-
Great work ezdog

-
Great work ezdog

It was an adventure for sure!
Also required much creative language but no real challenge for me there[emoji106]Sent from my iPhone,dont expect too much[emoji85]
Sounds a adventure

I use creative language quite often as well :DIn the interest of transparency the cleaning people spoke no English anyway so it is always an adventure there anyway!
And I no habla so........
Sent from my iPhone,dont expect too much[emoji85]
-
Used the PST II to replace a fire alarm


-
Nice work guys!

-
Used the Supertool 300 and the squirt to help make wire bails for my opinels.
Recently got in some suspension clips and wanted to try them out on my opinels. Used the awl to make a pilot hole for the drill. Used both plier heads and cutters for forming the bails.


Sent from my SM-G920V using Tapatalk
-
Nice work Anka

-
Great job Anka

-
Wave for unscrewing the setup based upon a RaspberryPi, cutting the zip ties and assembling it all back together. Experimenting with an original NoIR RaspberryPi camera I just bought [emoji41]

-
Got to use the trusty Kick ASS’s saw blade to cut down the pesky overgrown branches that get in the way and scratch up our cars whenever we need to back out. Note the diameter of the branches. It did a great job, though I think I still prefer the cross cutting action of the Vic style saws.

-
Good job MS

-
-
@SirVicaLot said:
Used the PST II to replace a fire alarm
Great the phillips driver on the PST

-
@Anka said:
Used the Supertool 300 and the squirt to help make wire bails for my opinels.Recently got in some suspension clips and wanted to try them out on my opinels. Used the awl to make a pilot hole for the drill. Used both plier heads and cutters for forming the bails.


Sent from my SM-G920V using Tapatalk
Not bad Anka

... I've got to try out an Opinel at some point I guess

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login