February Fixie Challenge
-
Packing the Finnhawk today. It feels like a heavier duty Companion, and the grip is large enough to be comfortable with gloves or without. It's a no slip handle, and the blade is good and sharp. The sheath is identical to the Mora. The back side of the blade is rougher, and works better for fire striking. Today, the only use I've put it to was cutting open packets for lunch.

-
Ooooh, I like your new sheath, Borg!

-
day 19: i'm running low on Wild Turkey
<a href="https://flic.kr/p/SGnxT5" target="_blank" rel="noopener noreferrer"><img src="https://farm8.staticflickr.com/7857/33274702838_38102cb5c3_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
-
Day 19
Finally, something to cut! We have linoleum in our kitchen and it makes for a slippery surface for our basset. To address this, a nice little rug to allow our baby girl to walk without slipping.
My fixie handled the task easily. Not a huge task but it's something.



Ken
Sent from my iPad using Tapatalk
-
Day #19 - opened a mid afternoon snack

Sent from my Redmi Note 5
-
Use of backup knife report, simple reason i needed an awl.. i didn't like the look of the grain on some shed trim so it got a pilot hole with the Pioneer, but i think that's ok as it was the awl in use not the blade


It did get used at lunchtime though for trimming and edging sheath number 2, i decided to go with just a blade cover..well i had no other option as i didn't have enough leather for anything else

Really wanted a snap button on it but went with glued on Velcro...cos' that's what i had

And the back, as i had sewn on the tab i saw the importance of a thread groove inside, in time the knife will wear down the thread but its fine, i'm aware of the prob so slide the knife in at an angle..next one will be more protected


Thread is a mess and some holes are too big but function over form, it will do

Oh BTW, i did burnish it

I'm really glad i got this finished today as my next project has arrived


Oh no no no, this just will not do...where is my wire brush and polishing wheel

Nice sheath

But your next project look very interesting! I don’t think I have seen a tang like that! Can you tell me more on that one?
-
Late snack and of all my cargo pants only one has the knife slot on my right side! Been carrying it there and will buy more pants like this one. I really am enjoying carry it this way now
Nice snack!

And your carry option is a great one
Sent fra min FRD-L09 via Tapatalk
I am loving it! It is perfect place location and out of the way! I have yet to find a negative thing yet!
Same here, I carry mine in a similar way at work

Sent fra min FRD-L09 via Tapatalk

-
@Barry Rowland said:
Packing the Finnhawk today. It feels like a heavier duty Companion, and the grip is large enough to be comfortable with gloves or without. It's a no slip handle, and the blade is good and sharp. The sheath is identical to the Mora. The back side of the blade is rougher, and works better for fire striking. Today, the only use I've put it to was cutting open packets for lunch.Nice and usages for the body is always worth while!

-
@styx said:
day 19: i'm running low on Wild Turkey<a href="https://flic.kr/p/SGnxT5" target="_blank" rel="noopener noreferrer"><img src="https://farm8.staticflickr.com/7857/33274702838_38102cb5c3_k.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>
You can low, just don’t run out!

-
Finally, something to cut! We have linoleum in our kitchen and it makes for a slippery surface for our basset. To address this, a nice little rug to allow our baby girl to walk without slipping.
My fixie handled the task easily. Not a huge task but it's something.



Ken
Sent from my iPad using Tapatalk
Adds color to the room!

-
@FInixNOver said:
Day #19 - opened a mid afternoon snack

Sent from my Redmi Note 5
Waffle crisps - that sounds really good!

-
Great posts and photo’s - well done!

-
Kinda tired tonight...nite all!

-
Day 19:
We've been getting a lot of Juncos, in addition to the usual sparrows, finches, and chickadees, so the bird seed has needed to be replenished more often these last couple of months......

-
Great pic Nix, that is a big bag of seeds.
Ken
-
We got hungry birds...! :D
-
Day 19,
Use of backup knife report, simple reason i needed an awl.. i didn't like the look of the grain on some shed trim so it got a pilot hole with the Pioneer, but i think that's ok as it was the awl in use not the blade


It did get used at lunchtime though for trimming and edging sheath number 2, i decided to go with just a blade cover..well i had no other option as i didn't have enough leather for anything else

Really wanted a snap button on it but went with glued on Velcro...cos' that's what i had

And the back, as i had sewn on the tab i saw the importance of a thread groove inside, in time the knife will wear down the thread but its fine, i'm aware of the prob so slide the knife in at an angle..next one will be more protected


Thread is a mess and some holes are too big but function over form, it will do

Oh BTW, i did burnish it

I'm really glad i got this finished today as my next project has arrived


Oh no no no, this just will not do...where is my wire brush and polishing wheel

Nice sheath

But your next project look very interesting! I don’t think I have seen a tang like that! Can you tell me more on that one?
If I'm not mistaken, it's a blade for a friction folder.
Sent fra min FRD-L09 via Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




