Show off your Sak mod's!
-
That's great! Is that hole in the outer liner the only change needed to fit the Timekeeper scales?
I think I feel a Timekeeper/Yeoman coming on.
-
@AndyTiedye said:
That's great! Is that hole in the outer liner the only change needed to fit the Timekeeper scales?I think I feel a Timekeeper/Yeoman coming on.
There's also the stepped cutout by the hook. I used the dremel for the cutout. For the battery hole, I marked its general location, drilled a pilot hole and then drilled with a larger drill, not quite through (didn't want to punch into the liner next to it.) NB: I opened all the blades in the line of fire of the pilot drill (cap lifter, bit holder and awl) before drilling. I finished the hole off with a dremel as well.
-
Great job.

-
Nice, Don't think it'd fit on my wrist though :( :P
If you still want the option of tweezers try pulling the back scale off and having a look to see if it has the cutout for additional tweezers at the opposite end to normal. Most modern plus scales have this. Just open the slot up to the outside world with a small file

Neil
-
The timekeeper scale didn't. I looked at a few. The Cybertool 41 scales have it, the Cybertool 29 doesn't.

I gotta dig around for another red plus scale... :ahhh
-
Mr Whippy.
That looks like a great mod.

-
Great job!
-
I like both mods the firesteel mod on the Swisstool and the Timekeeper whachamacallit 1 :D
-
Hi all,
I'm the new guy, but hardly new to Swiss Army Knives. I thought I'd stop by and show off my latest SAK rescaling. The subject was my long time favorite outdoor SAK, the Victorinox Huntsman. I had done a Huntsman in white paper Micarta years ago, but always wished that I'd used green canvas Micarta. There's just something extremely cool about canvas Micarta. Wickedly tough stuff, and quite a challenge to work with. Well, I finally had some free time over the weekend, and made my dream come true. I did make the slot for the tweezers, but didn't bother with the toothpick, as I've never successfully used the toothpick. A fresh slice of green paracord adds the final touch.



A couple of old rescaling projects from years ago, done in white paper Micarta and red linen Micarta:




-
Very nice work mate. :)
And welcome to the forum.

-
Welcome aboard!! Way to set the bar high....very nice work.
-
Welcome to the forum and can I say I really like the red linen. The others are great too but the red is subtle enough that you just have to give it a second glance before you're sure it's a mod. Things that make you look twice are good in my book.

-
Great work Buzzbait, and welcome to the forum

-
I quite like the green one myself. Good work there

-
Great mods :) Welcome to the forum

-
Those are sweet! 8)
I think you're going to fit in well round here

Neil
-
Beautiful scale work there Buzz, welcome to the forum

-
WOW!!!
-
The wonderful scale mod done by buzzbait remembers me I modded some scales too.
Not so nicely, though.I had found two SAKs with badly chipped scales, but with good blades.
I made two mods, one for my GF and one for my mum. My GF likes turquoise, so I used some polymeric clay in turquoise and glow-in-the-dark to make two FAT -she liked so- scales. I cooked them in low-temperature on the knife to give them shape, then alone in higher temp. Refinished, laquered, put on the logo shield, laquered again. Now this SAK is somewhere in my girlfriend's purse.


-
The white one is a nacre wannabe in the same polymeric clay, now in my mom's keychain.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login