A knifeless Kick, of sorts.
-
Spoonrobot, nice mod... i liked 8)
why didn't you use the handles of the Blast to retain the locking capabilities? ???
-
@Chaka said:
Spoonrobot, nice mod... i liked 8)why didn't you use the handles of the Blast to retain the locking capabilities? ???
In short; I wanted the smallest, lightest full-size tool with the most useful implements. The best way to do that was to use the Kick chassis. The Blast and the Fuse both feature locks for the implements but they are both thicker than the Kick and the lock system does add bulk to the tool. By using the Kick I was able to cram as much into a little as possible; leaving me with on the items I ever really need.
-
Looks sweet! Too bad you couldn't reverse the pliers to make it an outside-opener. I'd love to do that with my Core. Then -that- would be -my- A+ perfect multi like you have now.
-
Have you had an opportunity to carry your blasted Kick very much yet Spoonrobot? I'm wondering...does having the pocket clip on the end opposite the plier head tend to cause the tool to flop open during carry?
-
I've been carrying it to work this week and so far it's working very well. I love being able to carry tools normally only found in larger/heavier multi-tools in such a smaller/simpler tool.
At work, I generally carry the tool is my back left pocket so the unclipped handle sits against the seam of said pocket and effectively keeps the tool shut. When I'm just poking around town and such I keep it clipped to my left front pocket which means the clipped handle is against the seam and the tool is not sealed by said seam. In the latter configuration there is a chance for the tool to fall open but so far it hasn't happened, the tool stays shut pretty tight so I don't think it will be a problem.
The Leatherman pocket clip set-up is a little loose though. It's nowhere near as tight as the 2004Wave/Charge set-up. I am very very glad they decided to introduce such a system on another of their models but it's not the best set-up.
-
@Spoonrobot said:
The Leatherman pocket clip set-up is a little loose though. It's nowhere near as tight as the 2004Wave/Charge set-up. I am very very glad they decided to introduce such a system on another of their models but it's not the best set-up.Are you saying that the clip is a little loose on the tool itself? Or that the clip does not grap hold of your pocket tightly enough, making the tool feel loose?
-
The clip is a little loose on the tool itself, no matter how hard you tighten the screw, due to the design set-up. The clip is held steady (straight up/down) by a tab that folds off to the side of the tool. The problem is that the tab is not 100% mating with the side of the tool so there is some wiggle (less that 1/4"). It's something I can fix, I just haven't yet. This is also something that may be limited to my specific tool, I haven't tried any other Kick pocket clips; they may be fitted better.
The actual clip tension is very good, tight enought to keep the tool from slipping but loose enough to readily slide in the pocket.
-
So are you just gonna squish that little bent piece of metal on your clip around a little more? So it comes up snug against the side of the Kick?
-
I'm on my way to make this modded Kick...I just bought a Kick for $12 shipped from Bladeforums, and I'll be on the lookout for a cheap Blast.

-
The Blast shouldn't be too hard to come by- they have been liquidating them at several stores, often in conjunction with one of LM's knives. I am certain that you'll be able to find some on eBay if you keep watch.
Def
-
@Defender said:
The Blast shouldn't be too hard to come by- they have been liquidating them at several stores, often in conjunction with one of LM's knives. I am certain that you'll be able to find some on eBay if you keep watch.Def
Yup, I've seen those on ebay...I'd like to get an opened/used one for under $20, but I'd pay a little more if it comes with a Leatherman knife. Then I'll need a Kick pocket clip for a few bucks..
It's not that I need another multi right now, but I'd just like to stick it to Leatherman for not making their tools with changing/modding in mind

-
Who needs another multi? I'm sure we all have enough to tools to rebuild Beruit ten times over!
Not that it will stop any of us from getting more!
Def
-
@Defender said:
Who needs another multi? I'm sure we all have enough to tools to rebuild Beruit ten times over!Not that it will stop any of us from getting more!
Def
haha that's true...Tool fanatics can rationalize another purchase by claiming it's for diffrent attire...this modded Kick/Blast is for pocket carry with a clip, my SOG is not, therefore I need to purchase two multi tools and a clip, spend a few nights after work with a few beers rebuilding them, buy a Dremel tool*, then hope for the day I need to carry a full size multi with a pocket clip. See it all makes sense.
*This might be the project that makes me actually buy a Dremel instead of borrowing the one at work...more tools!
-
Dremel= plug in multitool!
Def
-
@Spoonrobot said:
The clip is a little loose on the tool itself, no matter how hard you tighten the screw, due to the design set-up. The clip is held steady (straight up/down) by a tab that folds off to the side of the tool. The problem is that the tab is not 100% mating with the side of the tool so there is some wiggle (less that 1/4"). It's something I can fix, I just haven't yet. This is also something that may be limited to my specific tool, I haven't tried any other Kick pocket clips; they may be fitted better.The actual clip tension is very good, tight enought to keep the tool from slipping but loose enough to readily slide in the pocket.
I was just about to ask about the clip and then I saw your post. This was not Leatherman's best design...

-
My clip works the same way. Functions well, but slides back and forth. It bothered me at first, but I got used to it. (It helps that its on my cheapest beater LM, if it was like that on my Charge, I'd be a bit upset!)
-
@Spoonrobot said:
Looks like a normal Leatherman Kick doesn't it?


Open up the handles and you'll start to see the difference!

Here's what I did.
I procured both a Leatherman Blast and a Kick for as little as possible. In this case eBay yielded the best deal. I then broke down the Blast into parts; removing the scissors, wood saw and file as well as two thick washers and putting them aside.
Next I broke down the Kick, removing the knife blade, large flathead screw driver and the lanyard ring as well as some thin washers. I tossed these parts in with what was left of the Blast since I wouldn't need them.
Moving along I begun test fitting the parts I had planned to put into the Kick. Some rules to follow are that there may be one long tool, one low tool, and one short tool in each of the handles. Check the picture above; starting with the lower handle we see that the long tool is the saw the low tool is the flathead and the short tool is the scissors.
After spending an hour or so fiddlin' with washers and implements I settled on a arrangement that fit just right and screwed everything back together. Following this I discovered that on the tang of the saw and file there are stops meant to fall into depressions specific for the Blast. These stops were preventing the two tools from seating all the way and subsequently were keeping the tool from closing all the way when folding the handles together. I slowly dremeled these stops off and checked the fit and finish of the tool.
As it stands now everything has good tenstion but the file very slightly scrapes the plier head when closing or opening the handles. I figure this will correct itself over time since the file will just wear away a small amount of metal on the plier head. The flathead also tends to get caught on the tab of the scissors so I will have to dremel down the tab very very slightly.
Modded on the Left, original on the right.

For some reason reverse of above. Modded on the right, original on the left. ::)

So there you have it, I have created my 100% A+ all-time perfect tool. This tool features the most perfect balance of implements to weight/size, a pocket clip and the satisfaction of a successful mod. It really has everything I want and nothing I don't.
I really should have done it in black oxide but they were a lot more expensive so maybe next time.
Any suggestions for what to do with the remains from the Blast and Kick?

Is the Blast knife blade larger than the Kick knife blade? I'd be interested in the knurled nuts & pins because I boogered the ones on my own Kick up taking it apart. I'd also like the knife blade from Kick and Blast and the tiny eyeglasses screwdriver from the Blast. PM me a price with shipping to 40065.
-
Sorry to say but I don't have the parts anymore. I recently moved and dumped a lot of my collection into storage by my families home several hours away. I don't expect to be around that way for at least another year or so.
-
I know I'm reviving a pretty old thread, but kudos on the mod!
I'm interested in making a modded Kick also. I tried taking mine apart using my Crunch and the Kick pocket clip, but when I clamp the knurled bolt with the Crunch and twist on the other side, the Crunch flips right off, I can't get a good enough bite on it.
How do I resolve this problem?
-
@E. Danny said:
I know I'm reviving a pretty old thread, but kudos on the mod!I'm interested in making a modded Kick also. I tried taking mine apart using my Crunch and the Kick pocket clip, but when I clamp the knurled bolt with the Crunch and twist on the other side, the Crunch flips right off, I can't get a good enough bite on it.
How do I resolve this problem?
Sounds like the Locktite on the threads has set up pretty good :-\
Maybe try touching a soldering iron to the offending bolt head? Perhaps the heat will soften up the Locktite, allowing the screws to come apart easier.
(Either that or maybe you have to get another pocket clip)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login