The Hacked Leatherman Owners Club.
-
@Sam Lim said:
I always had the impression that a Wave's internal tool doesn't always lock nicely in a surge. The locking groove is shallower and may slip on pressure. I could be very well wrong. Maybe BP could do some testing? ;)Yes, you are right. The Fuse/Blast Phillips driver does not make a solid click when deployed (unlike the original internal tools). I can also put pressure on the Phillips and make it dis-engage. :(
This makes me want to re-think my Surge fit out. Maybe I'll go back to the stock layout.
-
How about the ST300 Phillips?
-
@BePrepared said:
Yes, you are right. The Fuse/Blast Phillips driver does not make a solid click when deployed (unlike the original internal tools). I can also put pressure on the Phillips and make it dis-engage. :(This makes me want to re-think my Surge fit out. Maybe I'll go back to the stock layout.
thank you for testing and confirming this! Better to find out now than when u really need them! Thanks! -
The cut out on the Surge and Wave is the same depth, but the tang on the Surge tool is larger (more material). Taking a Dremel to the Wave slot and deepening it won't help. The Wave tools would need extra material added to pad it out.
I don't have any ST tools to check against.
I put my Surge tools back in place. I think the Wave and Surge will each serve a different purpose. :)
-
Cool! Yes the ST300 Phillips is what you want.

@BePrepared said:
Only drawback so far is the Surge scissors are left-hand one-hand opening, whereas I really like the convenience of the right-hand one-hand opening of the Vic modded scissors on the Wave.I open the scissors right-handed, pushing them out with my middle finger from underneath and finishing with my thumb.
-
You just made me remember I have a saw blade like that as well
I need to put a couple tools on the other pivot of mine as well 
-
-
Great mods, BP and Obi1

-
I know it was posted, yet i i post mine
.jpg)
-
Cool idea Raoul

-
-
my updated iteration of the Charge Knife

enjoy
-
Nice

-
Very cool
I still need to get an awl in mine 
-
@Poncho65 said:
Very cool
I still need to get an awl in mine 
I went with a Rebar File over the charge file because it has a much better profile for working with wood specifically. Also the cutting teeth on the thin side of the file are much more aggressive than those on the Charge file. I think this tool nearly covers the all my wood carving needs and EDC blade needs.
I just don't see any tool on the market that can match this. I think the issue is that most multi-tools try to cover too much ground on their toolset. The Vic's are a great example of this.
In opinion the most effective tools are the specialized ones designed to cover a set of tasks for one purpose. The Crunch, The Signal, The MUT, The Raptor, and the Multitasker Series 3 would be good examples of this.
Cheers,
H.G. -
I chose the Charge/Wave file because what I use it for
which is to debur metal some times and touch up sharpening on knife blades if need be
the Rebar file is good in it's own right but I like the diamond file just a bit more 
-
I liked the aggressive Rebar file too much to replace it, and I wanted a diamond file too, so I reshaped a Wave’s file and added it to my Rebar to have both


-
Nice work Max

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




