Early COMPACT?
-
Thank you all guys. Very kind comments and lots of feedback here! I'm attaching a few pictures (not my pics) of an identical SAK, which results to be an 84mm and it does not come with that large file at the back that I saw in the SAKwiki section you shared with me.
BUT I'm not able to upload pictures. An ERROR message pops up and tells me that the file is too large, even if it's smaller than 500mb
I'll give another try later today
-
You need to keep the actual physical size small enough too.
The 84mm size means you've got an 84mm Golfer.
The long nail file on the back is actualy a rare tool. Most 84mm Golfers don't have it.
The ones who do are even more desirable than the regular ones (which are quite sought after too) -
Welcome aboard!!
-
If there is no hook, then it is a 91mm golfer
-

On the subject of Golfers and SAKWiki, why are the '60s and earlier versions usually ignored or silent on the matter?
I have one of these Golfers (damaged horn scales) and collectors always have a tendency to say 'Fieldmaster' and 'Artisan'. I don't get it when the catalog listing is clear.

-
@MexSAK said:
Thank you all guys. Very kind comments and lots of feedback here! I'm attaching a few pictures (not my pics) of an identical SAK, which results to be an 84mm and it does not come with that large file at the back that I saw in the SAKwiki section you shared with me.BUT I'm not able to upload pictures. An ERROR message pops up and tells me that the file is too large, even if it's smaller than 500mb
I'll give another try later today
Cool. Some would say the 84mm Golfer is even better as that size with scissors haven't been in production for a long time now so are less and less common to find.
-
Hi Kamakiri... Can’t blame the collectors for calling it an artisan/fieldmaster. Because it has the same exact toolset... I believe that pic is an excerpt from the 70’s US Catalog. It may have been called by SAB as such but for the rest of the world its known as the artisan/fieldmaster... It would be interesting to note that at one time,SAB also marketed the BSA Explorer as the BSA Yeoman...
On older catalogs, Woodsman and Craftsman names were used to call the same fieldmaster model...
On the 35 page 70’s US catalog, there’s a Golfer entry showing 2 layer model... The same exact model collectors are familiar with.
Hope this helps...
-
On the subject of Golfers and SAKWiki, why are the '60s and earlier versions usually ignored or silent on the matter?
I have one of these Golfers (damaged horn scales) and collectors always have a tendency to say 'Fieldmaster' and 'Artisan'. I don't get it when the catalog listing is clear.
Regardless of its handle, I want one

-
@jaya_man said:
Hi Kamakiri... Can’t blame the collectors for calling it an artisan/fieldmaster. Because it has the same exact toolset... I believe that pic is an excerpt from the 70’s US Catalog. It may have been called by SAB as such but for the rest of the world its known as the artisan/fieldmaster... It would be interesting to note that at one time,SAB also marketed the BSA Explorer as the BSA Yeoman...Thanks for the reply jaya_man.
I've read what I could find on the history, but I've been studying the subject in isolation - lurking outside the community. I've only seen the SMICO catalog use the ARTISAN 1 & 2 names and haven't found any early references to the Fieldmaster name anywhere. Is there somewhere you could point me to or upload that explains otherwise?I did crop the Golfer info from the " '70's " (26 model) US catalog. I'm also pretty sure it's not from the '70s. A '69+ Champion doesn't have a shackle. And I have several examples of keyring LNF Champions. With all the angled saws visible my guess is the catalog is from the c. 64-65 range and not likely much past '66 - assuming it could be using dated graphics/pics.
@jaya_man said:
On older catalogs, Woodsman and Craftsman names were used to call the same fieldmaster model...That's one of the issues I don't understand...how it (a 136ka) was ever a Fieldmaster/Artisan before it was a Craftsman. The Craftsman name is in use in catalogs and brochures from the '50s and definitely by '54 and directly links the 136ka. I only suspect even earlier based on the post-WWII copies available and the fuzzy history.
@jaya_man said:
On the 35 page 70’s US catalog, there’s a Golfer entry showing 2 layer model... The same exact model collectors are familiar with.Hope this helps...
Understood, and agreed. I only referenced the later catalogs that reference the transition of this Golfer style from 84mm to 91mm for brevity. It also does make me question wether the LNF version was ever officially a Golfer or something else entirely.
@El Corkscrew said:
Regardless of its handle, I want one
I love mine, but not looking forward to tackling the repair on it. A/A- metal parts and D- chipped to smurf scales and no T&T.
-
If you're getting new T&T for it, make sure the Tweezers are alu tipped if you want to keep it period correct.

-
@Mechanickal said:
If you're getting new T&T for it, make sure the Tweezers are alu tipped if you want to keep it period correct.
Nice! Is the box marked Golfer?
I'm pretty sure mine is old enough to have the nickel silver tipped ones. I have a Champion horn scale that's similar era with NS tipped tweezers that came from the original owner. Both have angled teeth on the wood saws and exposed rivets.
-
@kamakiri said:
Nice! Is the box marked Golfer?I'm pretty sure mine is old enough to have the nickel silver tipped ones. I have a Champion horn scale that's similar era with NS tipped tweezers that came from the original owner. Both have angled teeth on the wood saws and exposed rivets.
It's got a "horn" marked pricetag, yes.
Need to check if there's a name.
I don't think there was one on it though.I do think it was repackaged though.
Good thing is that this happened at a Vic flagship store. -
@Mechanickal said:
It's got a "horn" marked pricetag, yes.
Need to check if there's a name.
I don't think there was one on it though.I do think it was repackaged though.
Good thing is that this happened at a Vic flagship store.I was just wondering. Would be nice if it had a label like Golfer w/ Nail File or something like that. Like the Onyx Compacts that say ' ONYX COMPACT - NO PEN'
Pics of mine...
Golfer:

Nickel silver tip:

Champion:

-
Pics no show! :ahhh
-
"Swiss Army Knife Genuine Horn"

-
@Mechanickal said:
Pics no show! :ahhhlol. Did the same for me, but seems to be working now. :)
@Mechanickal said:
"Swiss Army Knife Genuine Horn"
That's not too surprising. I've suspected the LNF versions aren't actually Golfers. Would be nice to see more box labels.
The number is also different than the ones listed on SAKWiki. Looks like it reads: 0.3600.61 and 0.3422.61 is in the Wiki.
-
With the fact that the box is rather new, I wouldn't be surprised if they just printed a "genuine horn" label with just about any serial no. on it :D
-
Yeah, that wouldn't surprise me either. :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
