What light did you carry today?
-
@Aloha said:
I really should get a drop in to get more run time off the 2 CR123s it takes.Do It!!!!!
This G3 has a Low Voltage 5 speed drop-in and I run it on 2aa Eneloops for a long while!

I have a G2 in my B.O.B. with a Malkoff extra long run time Drop-In for the 123s
There are so many great ones that it is fun to experiment and I suggest the Nailbender dop-in if just starting out.
And if not just starting out too!
He makes great units and they are reasonably priced too.The Malkoffs are also really reasonable for what you are getting so don't be scared of them either!
-
Amici,
Today's light we have the Nitecore TIP, but this one is manufactured out of stainless steel. Not that the original ones which were made out of Aluminum had any real issues, but these are definitely built to a much higher standard, and you can feel this when in hand. I have dropped this Black and Silver SS models numerous times from Asphalt to concrete, and hardly a ding or scratch, not as if that would be bad. In fact, such battle damage adds, "character" to the light as a whole I believe.There are only a few things I do not like about the TIP series, and they are:
1-The two piece construction, with the use of a visible rubber gasket. This sorta reminds me of an engine block and the head gasket, which in some of the old Cadillac engines ( which were made out of aluminum with poorly tapped bolts, would fail). My rubber gasket on the 1st generation TIP started to fail, and began to separate from the two components. I used Gorilla glue to repair it, when for the amount paid, plus the hype, I should not have needed too.. (hence my 1990's Cadillac engine analogy).
2-It utilizes an automatic turn off, just as soon as you turn it on.. I find this annoying.. It will turn off, right in the middle of your current task. This should be an option, that can be switched on and off.
3-The USB port dust cover, is a pain to take off, especially in a pinch. But it is workable.. You can utilize the light switch with the cover on with the older Aluminum models, not so with the SS versions.
4-Nitecore customer Service... Simply it absolutely sucks... pardon my language, but I need to call a spade a spade. For example, one of my original aluminum TIP lights, dropped and lost a screw. I sent their CS an email informing them of the issue, and simply requested a replacement screw, that's all. They responded that since I didn't buy the TIP directly from them, but from an online vendor, (why should that matter?) that they would not honor any warranty, so would not send a screw out.
BUT IF I went ahead and purchased another light from them directly, then they would gladly send a replacement screw along with the order. That's just nuts..
So in a nutshell, (no pun intended), If you haven't purchased one yet, but are planning too, definitely go with the Stainless Steel versions, just be aware of the negatives to go along with the positives.
Cheers,
Serge
-
Thank you. I have to check these out again. When I got the light I was really psyched to do it but that excitement slowed. I was going thru my 123 cells to check them and realized I had more than enough to put into this light for fun. Then the gear got going again. Its a cool light albeit large for today standards.Again much appreciate the info.
-
Amici,
Today's light, is an Eagtac D25C mini, which is also a twisty, my preferred option.Cheers,
Serge
-
Great carries guys

-
I have the Olight Baton S1R with me today


-
I carried the S1R today


-
Amici,
Here is another TIP which is again, constructed in stainless steel.Cheers,
Serge
-
Nice light, serge


-
@sergemaster said:
Amici,
Here is another TIP which is again, constructed in stainless steel.Cheers,
SergeNice.
Does it weigh a lot more than a standard TIP? -
H1R again today
since Daylight savings started it is just dark a few minutes after we get to work and this light has been performing great 

-
The days are getting longer, so my light is getting smaller. ;) Not carried the tiny Thrunite Ti3 NW in ages.
-
The TIP in copper today.
I must have a newer version because you can turn off the 30-seconds off function. It is meant as an option to the lockout. It left on low setting, and it gets activated in pocket, it shuts off in 30 secs.
The TINI has the same feature and, in addition, it has a 2 second delay at turn-on. Never had the TINI turn itself on.
Got em both in copper. Very nice quality (at least the ones I have).


-
Nice lights Gareth and William

-
@William said:
The TIP in copper today.
I must have a newer version because you can turn off the 30-seconds off function. It is meant as an option to the lockout. It left on low setting, and it gets activated in pocket, it shuts off in 30 secs.
The TINI has the same feature and, in addition, it has a 2 second delay at turn-on. Never had the TINI turn itself on.
Got em both in copper. Very nice quality (at least the ones I have).


I've been a huge fan of the TIP since I got mine. Punches out the lumens without being too huge.

-
Came home from the beach today to find some awesome goodies in my mailbox, a pair of Ultratac A-7's
Holy cow these things are small and powerful. 180 lumens for 30min run time on normal AAA battery, 4 hours on 50 lumens. Also I LOVE LOVE the difuser it came with. Makes it so much more functional.
here it is as part of my full weekend carry.
https://www.instagram.com/p/BvZ3RC7gdy1/?utm_source=ig_web_button_share_sheet
Cheers,
H.G. -
Those look sweet! :like:
@Happy Gilmore said:
Came home from the beach today to find some awesome goodies in my mailbox, a pair of Ultratac A-7'sHoly cow these things are small and powerful. 180 lumens for 30min run time on normal AAA battery, 4 hours on 50 lumens. Also I LOVE LOVE the difuser it came with. Makes it so much more functional.
here it is as part of my full weekend carry.
https://www.instagram.com/p/BvZ3RC7gdy1/?utm_source=ig_web_button_share_sheet
Cheers,
H.G. -
As always!

Sent from my iPhone,dont expect too much[emoji85]
-
Nice looking lights both of you
and glad to see you back, ez

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login