THE Crunch Owners Thread
-
thanks MMR

-
So Wspeed, I know you have a scissor on yours instead of a blade, but it required a lot of modding. I was thinking of modding mine a little different. I was going to replace the blade with a Scalpel Handle, That way I can use all the Havalon blades. A scalpel is very different from a normal knife, so in addition to being bladeless, it would let me carry a very different tool that I wouldn't be able to find anywhere else. Also I would let me face the blade outwards rather than toward the tightening nut. With a fix blade it would be to dangerous, but with just a scalpel handle it would have no risk.
Thoughts?
-
I like your idea HG

I have been thinking about a scalpel before
but haven’t got round to make one yet
But I wasn’t thinking of putting it on the Crunch
It will be interesting to see what you come up with
-
@Wspeed said:
I like your idea HG
I have been thinking about a scalpel before
but haven’t got round to make one yet
But I wasn’t thinking of putting it on the Crunch
It will be interesting to see what you come up with
April's goal is to get a crunch and plan out the mod, I also want to either make or buy a horizontal belt sheath for it.
I want to carry a Modded Crunch and Style PS as my EDC as a school teacher (no blades). A multi-tool is part of my identity, and with the Charge knife I made, I have a 3 piece set of multi-tools that covers practically everything.
Look at this complete tool set:
Crunch - True Tool
vice Grip
Flat drivers
Philips driver
File
Scalpel Exchanger
1/4 inch Hex Driver
Wire CutterStyle PS - Small Tasks
Small Needle Nose Plier
Tweezers
Scissor
small File
Small Philips Driver
Small Wire CutterCharge Knife - Wood working
Awl
Saw
Wood File
Serrated Knife
S30V Primary BladeIs there a major function I missed?
-
Looks good to me

I can’t see what else you would need with those tools :D
The only thing I would have different is a metal saw
-
Great pic Ws
I also can't wait to see what you come up with HG

And MMR
family friendly
if you wouldn't want your mother or your grandmother hearing it then please refrain from putting it ::) -
Thanks Poncho

-
@Wspeed said:
Looks good to me

I can’t see what else you would need with those tools :D
The only thing I would have different is a metal saw
I would agree, however Leatherman doesn't make one. Check the teeth on a Wave file..they are way way too dull to accomplish anything on metal. The Rebar file can do mild steel with its very aggressive teeth, but that is the extent of leatherman metal saws. So I should have it covered assuming its mild steel. Does the Crunch have teeth on its file?
Cheers,
H.G. -
I had a look at the file but no teeth

-
@Wspeed said:
Still my favourite MT

Can anyone advise me on how to remove the original pivot pin that holds the blade and screwdrivers? I've tried to remove mine with a couple of vice grips but it's going no where.
I did hear that Leatherman may have used thread locker on it so I'll try a bit of heat next time, is one end of the pivot held captive within one side of the handle, if so which side??
-
Use heat and it will help
also only one side turns but I can never remember which one does and it may be random
I have wrenches that member loki_mobipe has made up for the knurled screws that make this job so much easier
contact him and you might be able to purchase some of those if you are so inclined 
Also welcome to

-
@Poncho65 said:
Use heat and it will help
also only one side turns but I can never remember which one does and it may be random
I have wrenches that member loki_mobipe has made up for the knurled screws that make this job so much easier
contact him and you might be able to purchase some of those if you are so inclined 
Also welcome to

Many thanks, would like to see a picture of those wrenches that he made.

-
@Poncho65 said:
Use heat and it will help
also only one side turns but I can never remember which one does and it may be random
I have wrenches that member loki_mobipe has made up for the knurled screws that make this job so much easier
contact him and you might be able to purchase some of those if you are so inclined 
Also welcome to

Exactly!
Seriously save yourself a ton of frustrations and get a set of Loki’s wrenches [emoji106][emoji846]
And lastly, welcome aboard sir!
Sent from my iPhone using Tapatalk
-
Seriously save yourself a ton of frustrations and get a set of Loki’s wrenches [emoji106][emoji846]
And lastly, welcome aboard sir!
Sent from my iPhone using Tapatalk
Interested in knowing more about these wrenches, however I bet the guy is in the States? If so the cost of duty and postage to the UK will probably mean it's a no go for me. :-\
-
Hi earthman the wrenches from Loki come from Russia
And his price includes the postage well worth getting a set
I got my wrenches from him as well
and it didn’t take too long for delivery
-
heat + Squirt PS4 has worked perfectly for every tool that uses these screws. For some reason it has the near perfect dimensions, only issue is the thread locker, but don't force it, since it might be the wrong side. I also use a small wrench from crescent.
Also, I've been looking at used Crunches...they run from $75 in bad condition to $90 in good condition...when a brand new one is $109...is this inflated or are these real values. I feel bad buying a new one when I am instantly going to void the warranty lol.
-
Crunches hold their value well and always cost around that
I bought mine cheaper than that but that was 10 years ago and I have tried to find another deal like that but so far I am still holding a total of the one I have ::) :D I would still look for a good second hand one since you are going to mod it anyways 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login