Vintage SAK Owners Club
-
- Tang stamps - eg Is it a Victoria?
As you may have gathered - I love the old SAKs
Victoria from the seller's photo:
[/url]@kamakiri said:
That's the spacer next to the small blade. Looks like a bird head when disassembled. I picked up the term while lurking here...maybe only some of the modders use it? Some from this era are aluminum. Not sure if those are anodized.Oh, I didn't now that.
- Tang stamps - eg Is it a Victoria?
-
@FolderBeholder said:
Happy to report it has nickel silver tipped tweezers, hard to capture in the photo.

Nice! That's what I was expecting should be there, but this knife is from the transition range between the two. Looks pretty clean in that shot...
-
Very nice!
-
Thank you kamakiri and Barry. I forgot to mention it has 29 wood saw teeth.

-
The best Champion I have ;)

-
@FolderBeholder said:
Happy to report it has nickel silver tipped tweezers, hard to capture in the photo.Very nice FB!

-
Two interesting Champions made for Hoffritz :
Champion from 1957-1958 with hidden rivets (since 1957) and pre1957 old tools and stamps:
-39 teeth wood saw,- square nail nick on LNF,
- aluminum small blade spacer,
- round section shape bail,
- VO CB stamp (1952-1957)

Champion from early 1980s. It has only Hoffritz name on it, no Victorinox name in blade stamp!
-
@jnoxyd said:
Two interesting Champions made for Hoffritz :
Champion from 1957-1958 with hidden rivets (since 1957) and pre1957 old tools and stamps:
-39 teeth wood saw,- square nail nick on LNF,
- aluminum small blade spacer,
- round section shape bail,
- VO CB stamp (1952-1957)

Champion from early 1980s. It has only Hoffritz name on it, no Victorinox name in blade stamp!
Wow! Two beauties there jnoxyd! I have one in route to me like your bottom knife (only Hoffritz stamp), except mine is a Camper model.
-
@jnoxyd said:
Two interesting Champions made for Hoffritz :
Champion from 1957-1958 with hidden rivets (since 1957) and pre1957 old tools and stamps:
-39 teeth wood saw,- square nail nick on LNF,
- aluminum small blade spacer,
- round section shape bail,
Champion from early 1980s. It has only Hoffritz name on it, no Victorinox name in blade stamp!
Nice pics jnoxyd!

-

Thanks for sharing, those are absolutely stunning.
-
@jnoxyd said:
Two interesting Champions made for Hoffritz :
Champion from 1957-1958 with hidden rivets (since 1957) and pre1957 old tools and stamps:
-39 teeth wood saw,- square nail nick on LNF,
- aluminum small blade spacer,
- round section shape bail,
- VO CB stamp (1952-1957)

Champion from early 1980s. It has only Hoffritz name on it, no Victorinox name in blade stamp!
Top one gets my vote for 'Best Champion' in your collection! ;) I don't have anything that nice from that date range.I have one just like the bottom one. It's actually late '70's. I have one exactly like it. The Hoffritz/SSR blades bridge into the '80s, but are Hot Stamped on the scale by then. The Awl will tell all. The configuration makes it late seventies, but the late-V1 Hoff inlay and the plastic tweezer tip put it in the c.'78-79 range. Scissor screw confirms - makes it firmly '77 or later.
-
With the c.'77 version on top:

Looking at mine again it looks closer to '79 and jnoxyd's might be more '78.

Devil is in the detail.
-
@kamakiri said:
With the c.'77 version on top:

Looking at mine again it looks closer to '79 and jnoxyd's might be more '78.

Devil is in the detail.
Yes, I should say scissors has large screw and awl has pre 83 tip shape ;) I date it as 1980-1983 only due to steel Victorinox inlay emblem. They changed nickel silver emblem inlay to steel one around 1980, at least I don't know another version. Do you?
-
@jnoxyd said:
Yes, I should say scissors has large screw and awl has pre 83 tip shape ;) I date it as 1980-1983 only due to steel Victorinox inlay emblem. They changed nickel silver emblem inlay to steel one around 1980, at least I don't know another version. Do you?There's a lot of misunderstanding about the stainless steel inlay use in the '70s.
The awl tip is '77 to '79. Maybe late '76 to early '80. If you measure the angle of the grind, it will be ~70º. Past '80, it would not have a ground tip, and would definitely have a hot stamp Hoffritz scale. '76 and earlier, the tip would be a different angle and other different details. Hoff tang stamps run to about '82 or so. There's a lot of those to prove the overlap in that date range as well as the c. '80 and post '80 awl styles.
Both Nickel Silver and Stainless inlays were used from '73 to '80. c. 1980 is only the end of Nickel Silver use. There is solid proof of stainless use with main line knives. The best proof are the combination with black double scissor springs from the '73 to '75 range, confirmed with the blank rear tangs ('73, '75, and '77 only). Far too many out there to ignore, and I have several examples from various lines/models. See the camping date thread for some of what I have on inlays and I put some of the awl info in my intro thread.
Perhaps the most compelling proof I have are knives with the exact same construction...main line with nickel silver scale inlays and SS Hoffritz inlays and tang stamp. Or maybe the mid- '70s Outdoorsman and Picnickers with nickel silver inlays that correspond to the Ranger and Camper counterparts with SS inlays.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


