What Is Your Latest Knife?
-
Nice knives in this topic

And thanks for noticing and commenting on mine, I haven't had a traditional folder in probably 40 years, and I can't put this one down -
@gustophersmob said:
Do you disassemble the knife to grind the back springs?
No, l ground them in place.

-
Great job Steve

-
The main blade backspring was sitting around .5 mm proud when closed and the pen was flush. I took the main backspring down so it was flush with the other backspring. I also rounded both tangs quite a bit which helped a lot in the opening. It was still a bit stiff on both blades so I slowly and carefully took more off both backsprings from the center rivet out to the bolster on my belt sander. I took a little checked, sanded a bit more until I got it where I wanted it.
-
Great work and idea thanks Steve

-
@SteveC said:
The main blade backspring was sitting around .5 mm proud when closed and the pen was flush. I took the main backspring down so it was flush with the other backspring. I also rounded both tangs quite a bit which helped a lot in the opening. It was still a bit stiff on both blades so I slowly and carefully took more off both backsprings from the center rivet out to the bolster on my belt sander. I took a little checked, sanded a bit more until I got it where I wanted it.Ah, that makes sense. Thanks for explaining it

I imagine taking material off the tang takes a steady hand.
-
Congratulations David,Steve and Greg.
Here is another Case Trapper titled The Beast.It has five blades representing the different type of blades that case has installed into the Trapper series over the years.This is also notable because Case incorporated a "cigar band" into this Beast.
As with almost all of my knives,I took it into the shop and removed all of the machine marks on the back springs and then polished them to a mirror finish.The first picture of the back springs show the dull finish,unfortunately the resolution wasn't sufficient to show the machine marks left over from the manufacturing process.
The second picture of the back springs was difficult to capture because of the reflections created by the finish.
-
Nice work toolguy excellent job on the polishing

-
@toolguy said:
Congratulations David,Steve and Greg.Here is another Case Trapper titled The Beast.It has five blades representing the different type of blades that case has installed into the Trapper series over the years.This is also notable because Case incorporated a "cigar band" into this Beast.
As with almost all of my knives,I took it into the shop and removed all of the machine marks on the back springs and then polished them to a mirror finish.The first picture of the back springs show the dull finish,unfortunately the resolution wasn't sufficient to show the machine marks left over from the manufacturing process.
The second picture of the back springs was difficult to capture because of the reflections created by the finish.
Thats quite a Trapper TG! Five blades. :o :)
-
RT that's gorgeous! I had no idea Case ever made such a knife.
@toolguy said:
Congratulations David,Steve and Greg.Here is another Case Trapper titled The Beast.It has five blades representing the different type of blades that case has installed into the Trapper series over the years.This is also notable because Case incorporated a "cigar band" into this Beast.
As with almost all of my knives,I took it into the shop and removed all of the machine marks on the back springs and then polished them to a mirror finish.The first picture of the back springs show the dull finish,unfortunately the resolution wasn't sufficient to show the machine marks left over from the manufacturing process.
The second picture of the back springs was difficult to capture because of the reflections created by the finish.
-
Cool Trapper Ray !

-
Won a bone handled #72 last night for a good price


-
Nice one Steve

-
I haven't purchased anything since my 'black alox' a few months back. Hopefully, that will change with the accruing of more funds. :o :D

-
Two rather inexpensive users; all Imperial Schrade Corporation products when they were still based in Ellenville. Less than $11 for the lot; $12 if we're counting the fact I paid $6 extra for six pocket clips to go on the Viper.
Schrade USA CH-7 Cliphanger "Viper". Quite a bit of wear and use--blade tip is blunt (from wear). Clip is something extra I found about the same time I won the knife on eBay last weekend. Works great. And reversible without screws, as it fits in using the Cliphanger quick release. I put the clip on the other side for carry--I at first carried it this way a bit, and it seemed weird. Hard to deploy the blade. . At 4.75 inches closed; serious work knife, it doesn't feel toy-like as the small (3 1/8 inch) Silhouette does. This is going to be a heavy work knife. And a regular EDC. This is my first Schrade USA folder with a pocket clip, even though it's an (official) add-on. It should have a lanyard with carabiner and quick release, which is missing. Besides, I can't use it with the clip; it locks on the other side of the knife; and the clip covers up the quick release on this side.
Apex (Imperial Ireland) AP-22 Barlow, National Rifle Association promo. Seems completely unused--still has a great factory edge on it. For around the house, it's perfect in that it weighs almost nothing. Brass center liner. Snaps pretty hard too.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
good score, even if I don't know 1st from 2nd generation. ???