Mini Tool Owner`s Club
-
@gregozedobe said:
My understanding is that the
"cleanskin" minis were the first version, followed by the
"US Pat Pend" version, then came the
"US PAT 4744272" without date codes, then came
"US PAT 4744272" with date codes (earliest date I have is 0395, latest is 0699), the last version had
"TOOL" on the pliers (I have 0102 and 0404).Almost all the earlier ones had "USA" on the piers. I suspect that LM produced a small quantity of mini/PST pliers without "USA" in the early days for some reason (before the infamous "not made in the US court case) and just used them up (they are definitely not the more angular Japanese pliers)
There were some transitional minis that had "US Pat Pend" on one handle and "US PAT 4744272" (no date codes) on the other handle (just to confuse us poor collectors).
There are pictures around of a Japanese Mini, but I don't know of anyone who has ever seen one in the metal.
The cleanskins were often etched with promo brand names etc. on the handles, but Hoffritz seemed to prefer to etch their brand on the knife blade rather than on the handle. I have a cleanskin and a transitional mini with Hoffritz on the blade.
^ Thought this info should be in this thread

-
Good idea, Steve

-
@Poncho65 said:
Good price, yes and it is also in like new condition (another reason I am excited) but that isn't why I am super excited with this particular one :DLook at the handles :dd: NO WRITING on either side :ahhh :ahhh :ahhh This means it is a very early one 8)
Looks like Poncho has a $1000 cleanskin mini :D
-
so thoughts, should I buy this mini-tool for $35?

Edit:
Couldn't help myself, got it for 35$ shipped.
-
@JustinCase said:
Looks like Poncho has a $1000 cleanskin mini :DIt's $300 now ::) My how it sure depreciated in a few hours :ahhh

Apparently someone thinks they are going to try and pull a fast one after reading in MTO a bit
I saw this last night but just now seeing your post 
-
@Happy Gilmore said:
so thoughts, should I buy this mini-tool for $35?
Edit:
Couldn't help myself, got it for 35$ shipped.
It is a good price for one
Hope you really
it, I love to carry them in a combo with other tools
Especially a good SAK or Charge knife 
-
-
So....
How angry would you guys be if I super modded a mini to rock a full internal set of tools? I just hate what I am going to have to do to these pliers to make it work...
-
@Happy Gilmore said:
How angry would you guys be if I super modded a mini to rock a full internal set of tools? I just hate what I am going to have to do to these pliers to make it work...Not at all, your tool, you do whatever you like. It's not like it is an irreplaceable rarity or anything.

Please show us what you end up with (and how you got there).
-
I hope so Greg
I will be there waiting with bells on :D -
@gregozedobe said:
Not at all, your tool, you do whatever you like. It's not like it is an irreplaceable rarity or anything.
Please show us what you end up with (and how you got there).

-
@Happy Gilmore said:
So....How angry would you guys be if I super modded a mini to rock a full internal set of tools? I just hate what I am going to have to do to these pliers to make it work...
Blunt nosed Mini

-
@Happy Gilmore said:
I am really hoping I can leave it as is, but yes I may make it a blunt nosed mini.I want to fit the bit exchanger there at the very least.
Cheers,
HGI think you will find that there is no room for a bit exchanger
-
That is a down side to them, they are not very moddable :-\ Other than that they are an awesome companion to a SAK or to a Charge or Wave knife

-
After looking at it I agree. Besides this tool is the closest I have ever seen to perfection.
https://www.instagram.com/p/BwIRMzvgrrE/?utm_source=ig_share_sheet&igshid=2lk3jwy3vypgWhat I am going to do is file down the flat driver into a 2D Philips hybrid like in a Micra. Then it will be perfect.
Cheers,
HG -
@Happy Gilmore said:
After looking at it I agree. Besides this tool is the closest I have ever seen to perfection.What I am going to do is file down the flat driver into a 2D Philips hybrid like in a Micra. Then it will be perfect.
I would advise caution if putting much torque on a screw. Because the driver is on the end of a file the metal is somewhat brittle, and I've seen quite a few minis with broken files (but that might have been because they were used as a pry bar).
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login