The Hacked Leatherman Owners Club.
-
Other than me personally putting the PE blade in instead of the SE blade ;) I really
it 
I wonder if a diamond file would be better in the place of the can opener and a long flat bit in place of the short one

Might have to track down a cheap SURGE now
:D -
@Poncho65 said:
Other than me personally putting the PE blade in instead of the SE blade ;) I really
it 
I wonder if a diamond file would be better in the place of the can opener and a long flat bit in place of the short one

Might have to track down a cheap SURGE now
:DThat might solve my problem also, I need one plain Steel Surge frame piece and if you do I'll send you the BO plier head to trade for the plain steel plier one as well.
Cheers,
H.G. -
This, is one incredibly headache modification..

Took me 2 days to get things straighten out.. Having my trusty dremel breaking down is not helping.. Problem faced are the enlarging of the scissor's end pivot to a standard 4mm dia. Adjusting the grinding area as the whole thing is held together by the devil-ish springs. Countless assembly and disassembly for fitting.. I do not want to do this again. :ahhh Internal load are standard.
Pictured with my edc scissors for work. These scissors are crazy stuff. Cuts anything I threw at it. Issue with the old one was its held together by screws and nut. They work beautifully but flex a little due to the wrong sized screw. My ocd is acting up so decided to make a proper one. Finding the proper screw is a real challenge. Knife making is next to zero here so the materials are hard to come by. Glad everything worked out.



Busted in a oho blade for kicks. Knife look familiar? :D Got lucky during first testing. Fits just nice.

Recent obsession with hawkbills..

-
Very cool Sam !

-
@Happy Gilmore said:
That might solve my problem also, I need one plain Steel Surge frame piece and if you do I'll send you the BO plier head to trade for the plain steel plier one as well.Cheers,
H.G.You may be waiting a while as I will try to get it on the cheap
but if/when I do we will see what we can work 
-
Love that mod, Sam
I always love the blade grinds as well
What type of parts pile do you have anyways :ahhh 
-
Plenty of spares

-
Thanks for the tip Sam... You just helped me solve my wave saw and file into kick mod... Just so happens my parts supplier has a couple of those bushings laying around... should be on the way tomorrow...

-
Bare with me. Last one. Trigger happy today. :P

-
Like it nice work Sam

-
@jaya_man said:
Thanks for the tip Sam... You just helped me solve my wave saw and file into kick mod... Just so happens my parts supplier has a couple of those bushings laying around... should be on the way tomorrow...

I did tried to get a few from Loki but he warned me the price is going to scare me off.. It did. :D not his fault. Blame it on shipping!!
-
-
@Sam Lim said:
Hands getting better at grinding with my bench grinder.
Parts pile? Like I said, I break more things than I fix..

My messy work space..

Juice bin

LM pile

GB and misc

Holy Crud! can I buy some parts from you? I'd love some rebar/blast saws. Also need the small flat drivers in some of the tools.
Cheers,
H.G. -
I’d wanted to do this mod for years, and it finally became a reality this week, as I got ahold of some of Loki’s wonderful tools to pull apart my Rebar. Now my Wave has the 3D screwdriver and awl from a Rebar, swapped out for the two bit drivers. All in all, the mod went beautifully, and the Wave still closed up nice and tight.








-
@Buzzbait said:
I’d wanted to do this mod for years, and it finally became a reality this week, as I got ahold of some of Loki’s wonderful tools to pull apart my Rebar. Now my Wave has the 3D screwdriver and awl from a Rebar, swapped out for the two bit drivers. All in all, the mod went beautifully, and the Wave still closed up nice and tight.







Love the wear on the BO!! Looks like something straight out of a LM advertisement!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login