The Hacked Leatherman Owners Club.
-
Sam, you and your amazing metal work modding skills.

Where do those tools come from BTW?
Ok, I give...if you mod the tools than basically anything is possible as you show often. I was thinking from a slot in kind of situation. What do you think of the Reaver? For some reason it feels like you gain more from the Wave/Rebar combo but maybe I'm wrong.
Cheers,
H.G. -
@Happy Gilmore said:
Sam, you and your amazing metal work modding skills.
Where do those tools come from BTW?
Ok, I give...if you mod the tools than basically anything is possible as you show often. I was thinking from a slot in kind of situation. What do you think of the Reaver? For some reason it feels like you gain more from the Wave/Rebar combo but maybe I'm wrong.
Cheers,
H.G.
Those are from a OG Supertool. You will be happy to know the tang profile is exactly the same. Just need some work on the locking notch. Many goodies in the old school tools. 
Ultimately, it depends on what you need in a multitool. Obi is another magician. I think he fitted 7 tools in one rebar handle. Which a wave is never able to do.
-
Blast pivot pin and locking tab in a Rebar frame is how Obi did that if i remember correctly. Not sure how smooth the opening and closing of tools will be in that mod though.
-
@Sam Lim said:
Those are from a OG Supertool. You will be happy to know the tang profile is exactly the same. Just need some work on the locking notch. Many goodies in the old school tools. 
Ultimately, it depends on what you need in a multitool. Obi is another magician. I think he fitted 7 tools in one rebar handle. Which a wave is never able to do.
7 is definitely possible on a side. I managed 6 standard tools incl. scissors and large flat which are both thick tools. Haven’t felt the urge yet to mod another LM as this Rebar gives me (almost) all I need. Great platform to mod IMO.

-
@SteveC said:
Blast pivot pin and locking tab in a Rebar frame is how Obi did that if i remember correctly. Not sure how smooth the opening and closing of tools will be in that mod though.very cool,
I have 2x BO Blasts on the way atm, one is brand new (leaving as is) and the other I am taking apart to see if I can make a Wave/Blast hybrid. However, what I've learned from the Core I recently received is that the width of the frame might not indicate necessarily more space inside. The ST300 has less total width but more internal space than the Core.
Core: 13.55-13.67mm inside
19.4-19.5mm outsideST300: 14.05-14.15mm inside
18.98-19.21mm ousidealso I started a new thread about tool dimensions a while ago, now that I have a new battery in my Caliper and access to way way more tools, I'll probably start filling in the stats.
@Max Stone said:
7 is definitely possible on a side. I managed 6 standard tools incl. scissors and large flat which are both thick tools. Haven’t felt the urge yet to mod another LM as this Rebar gives me (almost) all I need. Great platform to mod IMO.WAIT! how did they fit the Saw and knife on one side of the Rebar? That would be a big deal if it works consistently. Is that because you are using the Wave head rather than the one for Rebar?
Cheers,
H.G. -
The zytel series are thicker because of the zytel inserts. The internals are pretty much the same. So is the blast and a rebar...
-
@Sam Lim said:
The zytel series are thicker because of the zytel inserts. The internals are pretty much the same. So is the blast and a rebar...I can justify them being the same if I can use the wave Pivots over the proprietary ones in the Blast, I'm praying they work so that I can keep them easy to clean. I even have spare surge Pivots if it turns out to be too wide.
-
@Happy Gilmore said:
...
WAIT! how did they fit the Saw and knife on one side of the Rebar? That would be a big deal if it works consistently. Is that because you are using the Wave head rather than the one for Rebar?Cheers,
H.G.The saw is thin and fits comfortably together with the PE blade without snagging the pliers. No need to change to Wave pliers...I just prefer the rounded shape

-
@Happy Gilmore said:
I can justify them being the same if I can use the wave Pivots over the proprietary ones in the Blast, I'm praying they work so that I can keep them easy to clean. I even have spare surge Pivots if it turns out to be too wide.If you are going to mod a lot then it will save you a lot of time to get the Loki wrenches
Then you won't have to worry about the type of fastener a MT uses :DI know it has saved me a lot of aggravation since I bought my set

-
@Max Stone said:
7 is definitely possible on a side. I managed 6 standard tools incl. scissors and large flat which are both thick tools. Haven’t felt the urge yet to mod another LM as this Rebar gives me (almost) all I need. Great platform to mod IMO.Great mod, Max
the Rebar is one of the best platforms to mod, IMO

-
@Sam Lim said:
Ahemm.. cough cough..too
Why the different philips, because it seats in the centre axis.

Mine was very much a built up of balance parts. I only have one frame, scissor and the blade from a surge. You are right in the sense that half surge/wave have no real benefit. After all, one handle can accomodate 2 long tool and 3 short "most" of the time. Love the Surge as a whole. ST300, sorry not so much as I personally feel the handles to be harsher on the palm on heavy grip. Core is still my favourite for tradition butterfly opening heavy hitter so thats why my BN replaceable cutter is there.
Love the old mixed with the new, Sam 8)

-
@Poncho65 said:
If you are going to mod a lot then it will save you a lot of time to get the Loki wrenches
Then you won't have to worry about the type of fastener a MT uses :DI know it has saved me a lot of aggravation since I bought my set

like what Poncho said. Get the wrench. They are abit costly, but well worth the price and save u alot of headache. The zytel series are tricky. As there are plastic components, applying heat on the screw to break the locktite can risk damaging them. Many older tools are insanely tight. Using pliers on them usually doesn't work very well. -
@Syncop8r said:
True... I couldn't get the can opener back in there. Perhaps there is something else that could fit?


I'd take out the medium flat for it if you want the can opener, but honestly it is not need as a plier can open a can much faster anyway. Try it..if you have a plier no one needs a can opener..
-

Haha... the whole point of that mod was about getting a medium flat in.
-
That's one way...but not the cleanest or fastest. I need to make a vid of the method. You need to break the lip of the lid so that it releases from the can.
On a side note, I think I'm narrowing down a set of Leatherman knife setups for different activities.
https://www.instagram.com/p/BwYOXYKgcEC/?utm_source=ig_share_sheet&igshid=18vue5ncab5vm
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




